Singular Motorsports ECU Brackets
#81
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Reverent ECU:
I've made up the Reverent ECU adapter tabs that should allow MSLabs ECUs to fit Singular Motorsports ECU brackets. It turned out that our local guy with a Rev ECU had one of the old-style behemoth units *note: there is no hope for those to fit our brackets, sorry to those who have that model*
I've made up the Reverent ECU adapter tabs that should allow MSLabs ECUs to fit Singular Motorsports ECU brackets. It turned out that our local guy with a Rev ECU had one of the old-style behemoth units *note: there is no hope for those to fit our brackets, sorry to those who have that model*
#89
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I tried to leave a review on the louvers a while back, my only suggestion was to offer them pre-bent, sanded, and powdercoated. That would take a lot of time out of it. It took a lot longer than I thought to do those steps, but I spray-painted them. I will eventually get them powdercoated for durability.
Midpack - the louvers don't look ricey at all. They do grab a little attention. The louvers make my car look way meaner than it should. This past week I got my car aligned at TX Track Works. All Miata guys proceeded to ask what hood I had, where I got the louvers, etc.
As far as effectiveness, it's fun watching water droplets shoot vertically on the highway when its raining outside. They move a LOT of air.
Midpack - the louvers don't look ricey at all. They do grab a little attention. The louvers make my car look way meaner than it should. This past week I got my car aligned at TX Track Works. All Miata guys proceeded to ask what hood I had, where I got the louvers, etc.
As far as effectiveness, it's fun watching water droplets shoot vertically on the highway when its raining outside. They move a LOT of air.
Last edited by Dustin1824; 02-27-2015 at 10:34 PM. Reason: Because beer grammar in non-beer thread
#91
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The brackets, they are sweet:
![](https://www.miataturbo.net/attachments/ecus-tuning-54/134342d1425103358-singular-motorsports-ecu-brackets-bracket-small-.jpg)
I have only one complaint.
Sean. Ryan.
Out of multiple orders, I have received ONE STICKAR. You can see it, prominently displayed in the above picture.
Vendor fail! Multiple stickers must be enclosed with every order, or we might start to think you are secretly somehow part of IB and the whole MT.net subscriber sticker fail!
Layeth the stickerth upon me, my brotherth!
![](https://www.miataturbo.net/attachments/ecus-tuning-54/134342d1425103358-singular-motorsports-ecu-brackets-bracket-small-.jpg)
I have only one complaint.
Sean. Ryan.
Out of multiple orders, I have received ONE STICKAR. You can see it, prominently displayed in the above picture.
Vendor fail! Multiple stickers must be enclosed with every order, or we might start to think you are secretly somehow part of IB and the whole MT.net subscriber sticker fail!
Layeth the stickerth upon me, my brotherth!
#95
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have only one complaint.
Sean. Ryan.
Out of multiple orders, I have received ONE STICKAR. You can see it, prominently displayed in the above picture.
Vendor fail! Multiple stickers must be enclosed with every order, or we might start to think you are secretly somehow part of IB and the whole MT.net subscriber sticker fail!
Layeth the stickerth upon me, my brotherth!
Sean. Ryan.
Out of multiple orders, I have received ONE STICKAR. You can see it, prominently displayed in the above picture.
Vendor fail! Multiple stickers must be enclosed with every order, or we might start to think you are secretly somehow part of IB and the whole MT.net subscriber sticker fail!
Layeth the stickerth upon me, my brotherth!
#97
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: San Diego
Posts: 3,303
Total Cats: 1,216
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
OK you sticker lovers,
Up to now, I've been making every decal myself. We use decals for our logos on most of the parts as well, so I've had my hands full just cranking out enough to go on products, let alone extras to throw in the boxes.
I apologize for this and we hear your cries!
Looking into getting decals made from here on out, and once we have something lined up we'll make them available to anyone on MT.net who may be feeling there is a deficiency in their decal quota.
-Ryan
Up to now, I've been making every decal myself. We use decals for our logos on most of the parts as well, so I've had my hands full just cranking out enough to go on products, let alone extras to throw in the boxes.
I apologize for this and we hear your cries!
Looking into getting decals made from here on out, and once we have something lined up we'll make them available to anyone on MT.net who may be feeling there is a deficiency in their decal quota.
-Ryan
#99
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
OK you sticker lovers,
Up to now, I've been making every decal myself. We use decals for our logos on most of the parts as well, so I've had my hands full just cranking out enough to go on products, let alone extras to throw in the boxes.
I apologize for this and we hear your cries!
Looking into getting decals made from here on out, and once we have something lined up we'll make them available to anyone on MT.net who may be feeling there is a deficiency in their decal quota.
-Ryan
Up to now, I've been making every decal myself. We use decals for our logos on most of the parts as well, so I've had my hands full just cranking out enough to go on products, let alone extras to throw in the boxes.
I apologize for this and we hear your cries!
Looking into getting decals made from here on out, and once we have something lined up we'll make them available to anyone on MT.net who may be feeling there is a deficiency in their decal quota.
-Ryan