slouth2000

Hello, been trying to determine which version of the MSPNP I should buy for my specific setup.
I have a '91 with a 1.6 currently in it. I also have a 1.8 from a '96 I am going to install into it. The '96 engine came with the engine harness still on it but missing the coil pack. My plan is to do a turbo install + Coil on plug and Standalone all at once. I've figured out all the parts I need except which standalone due to the differences from 94 through 96. I know a 96 has a 3 connector ECU due to OBD2. I'd rather use the 96 Engine harness over the 1.6 harness due to the minor differences in cam placement and the 4 wire coil plug, also makes the general install easier.

So will the '96-97 MSPNP work fine with the '91 Body harness + '96 engine harness? Or do I have to buy the '94 MSPNP and then repin the engine harness for the '96 layout? I know worst case I can just build my own harness or reuse the 1.6 harness, but without having all the parts in front of me its hard to compare.

Stoffl

ecu always goes by chassis / engine loom.
You will not use the 96 engine loom. You'll adapt / add wiring to your 91 engine loom for the new setup, like sequential injection.