LC-1 dimmer NB
#1
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
LC-1 dimmer NB
yellow goes towards the headlights power wire for a dimmer.
#5
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
my car is stored 30 mins from here, i try to have everything figured out before i drive over there to fail.
TNS+ (Dimmer) and ILL- (Dimmer Return). do i to complete a circuit with the dimmer return or just hook the yellow wire to the tns+?
<3 you y8s
TNS+ (Dimmer) and ILL- (Dimmer Return). do i to complete a circuit with the dimmer return or just hook the yellow wire to the tns+?
<3 you y8s
#6
DEI liberal femininity
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 574
I can't remember for sure, but I think most "dimmer wires" go to 12V when you turn the lights on. all you gotta do is tap that wire and run it to the gauge "dim" wire.
http://www.innovatemotorsports.com/s.../DB_manual.pdf
they say to use an actual headlight power wire. Which is pretty lame.
Just pull out you stereo, stick a probe in the harness with the key on and lights off and measure something below 3V and turn the lights on and measure 12V and you're in business.
http://www.innovatemotorsports.com/s.../DB_manual.pdf
they say to use an actual headlight power wire. Which is pretty lame.
Just pull out you stereo, stick a probe in the harness with the key on and lights off and measure something below 3V and turn the lights on and measure 12V and you're in business.
Thread
Thread Starter
Forum
Replies
Last Post