Issue with Innovate MTX-L WB Display
#1
Issue with Innovate MTX-L WB Display
Hey guys,
I recently installed MSPNP2 and the MTX-L in my 99 Miata that is awaiting its BEGI Shanghai-S Turbo kit. The WB sends the proper output to tunerstudio and one of the scrolling dots seems to accurately track AFR, but the display doesn't read correctly on the WB itself and there is an extra dot.....
The MTX-L worked normally for about a week before it randomly developed this issue.
Connections:
Switched 12v - Spliced and Soldered into radio power source
Ground - Wire ran through firewall grommet to ECU ground at front of Valve Cover
AFR Output - Directly into pin 14 MSPNP
Headlight switched power is grounded.
Here is a video I just made showing the issue.
20121010_195912.mp4 - YouTube
Any advice would be greatly appreciated!
Thanks
I recently installed MSPNP2 and the MTX-L in my 99 Miata that is awaiting its BEGI Shanghai-S Turbo kit. The WB sends the proper output to tunerstudio and one of the scrolling dots seems to accurately track AFR, but the display doesn't read correctly on the WB itself and there is an extra dot.....
The MTX-L worked normally for about a week before it randomly developed this issue.
Connections:
Switched 12v - Spliced and Soldered into radio power source
Ground - Wire ran through firewall grommet to ECU ground at front of Valve Cover
AFR Output - Directly into pin 14 MSPNP
Headlight switched power is grounded.
Here is a video I just made showing the issue.
20121010_195912.mp4 - YouTube
Any advice would be greatly appreciated!
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM