EMS Questions
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am currently running hydra and it is confusing. I want to run the easiest to set up EMS system standalone or piggyback that will allow me to run 230-300 whp that is good. I am currently running the hydra system I think it is difficult and since I daily drive this car I want reliability and ease of use. I have seen the Xede systems and mspnp systems also AEM and others. Any help would be nice. if there is an easier out of the box system or set up wise I would probably sell this set up and purchase what ever. Thank you for all the help.
P.S. I notice that the Xede systems do not have a area on here are they self managing or nicer systems? What is the reason for this?
P.S. I notice that the Xede systems do not have a area on here are they self managing or nicer systems? What is the reason for this?
Last edited by mach5; 01-23-2010 at 08:28 PM.
#3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So I can run decent horse power on this system with easy tuning? Also I see there are two different systems sold by adaptronic which is the one everyone is using here is it the 999.00 one? I have been doing a bit more research on the system and it looks good I would just like to know everyone else's opinion on what the easiest systems to use are. Thank you.
Last edited by mach5; 01-23-2010 at 10:02 PM.
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
DIYPNP is where its at!
DIYAutoTune.com Megasquirt Kits / Assembled Engine Management Systems, Wideband o2 Sensor Systems and tuning products
and what year is your car?
DIYAutoTune.com Megasquirt Kits / Assembled Engine Management Systems, Wideband o2 Sensor Systems and tuning products
and what year is your car?
#5
Elite Member
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So I can run decent horse power on this system with easy tuning? Also I see there are two different systems sold by adaptronic which is the one everyone is using here is it the 999.00 one? I have been doing a bit more research on the system and it looks good I would just like to know everyone else's opinion on what the easiest systems to use are. Thank you.
You'll get a lot of support for it here.
I run an AEM and even though I'm finally pretty happy with how my car is running; it sure took me too many months to get to this stage!
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Link, Hydra, MS, SDS, etc.....the one thing they all have in common is the capability to let you melt your pistons and turn your engine into shrapnel in an eye blink if you don't tune properly. If you can't get comfy with the Hydra, pay a qualified tuner to tune your car on a dyno. It's a lot cheaper than replacing the Hydra and you'll have before and after maps to review and learn from.
#10
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Like SN95 says...
If you can't figure out the Hydra, there's no reason any other engine management is going to be "easy" for you. They really are all the same except for minor differences in the user interface and minor differences in the way ancillary ECU functions are handled. If you can tune one, you can tune them all. And if you can't tune one, well...
I'd suggest keeping the hydra. It is a good system and easy to use for a daily driver. Plus you have Flyin Miata behind it. I ran one for a few years and many thousand miles and it was fine. I made a cross country trip with it.
Go read the manual for it a few times from cover to cover. Learn what all the functions do and how the car behaves when you change them.
The rest of the knowlege just comes from reading various tuning forums and playing with the system (conservatively, so you dont blow **** up).
If you can't figure out the Hydra, there's no reason any other engine management is going to be "easy" for you. They really are all the same except for minor differences in the user interface and minor differences in the way ancillary ECU functions are handled. If you can tune one, you can tune them all. And if you can't tune one, well...
I'd suggest keeping the hydra. It is a good system and easy to use for a daily driver. Plus you have Flyin Miata behind it. I ran one for a few years and many thousand miles and it was fine. I made a cross country trip with it.
Go read the manual for it a few times from cover to cover. Learn what all the functions do and how the car behaves when you change them.
The rest of the knowlege just comes from reading various tuning forums and playing with the system (conservatively, so you dont blow **** up).
#12
Elite Member
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Go read the manual for it a few times from cover to cover. Learn what all the functions do and how the car behaves when you change them.
The rest of the knowlege just comes from reading various tuning forums and playing with the system (conservatively, so you dont blow **** up).
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
Mach, the MS is by far the simplest one. I had one in my car for a few days and indeed it is much simpler to understand but..... if you want an ems that works well and has support here, go for the Adaptronic.
And yes; I think y8s is currently running an Adaptronic in his car.
FWIW; after what I went through in setting up my AEM, I wouldn't recommend it for anyone with no prior tuning knowledge. In any case, if you decide to buy it, I'd be more than willing to help you out with my very limited knowledge.
#13
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
irrelevant. it is my third and not last EMS in the miata most likely.
I might have had an AEM if some more of the research on reading the NB triggers and controlling VVT had been done a few months earlier or I had waited a few months longer.
What do you find difficult about the Hydra software that makes you want to ditch it? Which version do you have?
I might have had an AEM if some more of the research on reading the NB triggers and controlling VVT had been done a few months earlier or I had waited a few months longer.
What do you find difficult about the Hydra software that makes you want to ditch it? Which version do you have?
#15
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
hydra cold start settings:
1. Cranking enrichment: Select > Control 2 > Cranking enrichment
2. Post Start Enrichment: Select > Control 1 > Post Start Enrichment
3. Coolant temp trim: Select > Control 1 > coolant temp trim
Hydra autotune settings:
1. Autotune AFR Target: Select > AFR Target
2. Autotune rate (higher is slower, leave around 16-32): Select > Control 3 > Autotune Rate
3. Other autotune settings: Select > Settings > Closed Loop...
* Enable Closed Loop
* Enable Auto-Tune
* Lower RPM limit 1500
* Upper limit (up to you, I use redline)
* Sensor source: wideband target table
If you have serial connection problems with your computer, changing engine management wont fix them.
And if you dont take the time to learn the system you have, you'll be twice as irritated when you spend another thousand dollars on a different EMS and it doesn't do all the work for you either.
1. Cranking enrichment: Select > Control 2 > Cranking enrichment
2. Post Start Enrichment: Select > Control 1 > Post Start Enrichment
3. Coolant temp trim: Select > Control 1 > coolant temp trim
Hydra autotune settings:
1. Autotune AFR Target: Select > AFR Target
2. Autotune rate (higher is slower, leave around 16-32): Select > Control 3 > Autotune Rate
3. Other autotune settings: Select > Settings > Closed Loop...
* Enable Closed Loop
* Enable Auto-Tune
* Lower RPM limit 1500
* Upper limit (up to you, I use redline)
* Sensor source: wideband target table
If you have serial connection problems with your computer, changing engine management wont fix them.
And if you dont take the time to learn the system you have, you'll be twice as irritated when you spend another thousand dollars on a different EMS and it doesn't do all the work for you either.
#16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Mach5,
You first posted a request for a Hydra base map (in the Hydra sub forum) in late October of last year. Instead of spending $60.00 and getting a good base map from Jeremy at FM, you have been struggling with getting your car running with the Hydra for almost 3 months! You could have been driving the car with a safe base tune 2.5 months ago if you had bought the FM base map. Has 3 months of jerking around been worth the $60 you saved by not buying the FM base map and getting FM support? Why are you willing to buy a new $1,000 EMS but unwilling to spend $60 on a base map?????
The Hydra is a good EMS and will support a ton of power. Take a look at Jason's (JayL) build thread and look at how much power he is making with his 1.8L VVT Hydra tuned car. 11 secs at 120mph in the 1/4 is awesome; he has sooo much power that he just eases the car out the hole (look at his 60' times) and still run 11s! He has also invested a lot of time and effort in dyno tuning his car to get it dialed in (and avoid melting his built motor).
You've got a quality bottom end in your motor, but it can still be damaged with a bad tune. While you can tune a car without a dyno, it takes a lot more time and effort. If you don't have any good dyno tuners down in STL, I can try and help you locate some qualified tuners in the Chicago area. If you still want to do your own tuning; here is a thread I suggest that you read and re-read repeatedly before you start your tuning efforts. This thread is specifically targeted towards Evo tuning, but the tuning concepts and methodology that are clearly explained are applicable to tuning a turbo Miata:
How To Tune an Evo - evolutionm.net
You first posted a request for a Hydra base map (in the Hydra sub forum) in late October of last year. Instead of spending $60.00 and getting a good base map from Jeremy at FM, you have been struggling with getting your car running with the Hydra for almost 3 months! You could have been driving the car with a safe base tune 2.5 months ago if you had bought the FM base map. Has 3 months of jerking around been worth the $60 you saved by not buying the FM base map and getting FM support? Why are you willing to buy a new $1,000 EMS but unwilling to spend $60 on a base map?????
The Hydra is a good EMS and will support a ton of power. Take a look at Jason's (JayL) build thread and look at how much power he is making with his 1.8L VVT Hydra tuned car. 11 secs at 120mph in the 1/4 is awesome; he has sooo much power that he just eases the car out the hole (look at his 60' times) and still run 11s! He has also invested a lot of time and effort in dyno tuning his car to get it dialed in (and avoid melting his built motor).
You've got a quality bottom end in your motor, but it can still be damaged with a bad tune. While you can tune a car without a dyno, it takes a lot more time and effort. If you don't have any good dyno tuners down in STL, I can try and help you locate some qualified tuners in the Chicago area. If you still want to do your own tuning; here is a thread I suggest that you read and re-read repeatedly before you start your tuning efforts. This thread is specifically targeted towards Evo tuning, but the tuning concepts and methodology that are clearly explained are applicable to tuning a turbo Miata:
How To Tune an Evo - evolutionm.net
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have paid for a base map from jeremy and have purchased the Wideband O2 from him. Also the shop that does all my work has been jerking around with me putting my hydra on Long term auto tune they have failed to do a proper tune on the Dyno. I have struggled with them to tune my car and have tryed to tune it myself and when doing so I ended up with some HUGE!! spikes and kept having to go back to base map that jeremy sent me. I do currently have my shop working on it and as far as the built motor that is as off since I blew it up on the hydra system running to lean on top end. I have bought my pistons crank and others from FM and support them. MONEY is not and issue. I just want a fast car with no issues and personally don't want to mess with it at all. I don't car to DIY or other. If I can learn it that is great but it has been nothing but head aches. Please just don't assume.
Thank you Y8s I will check out the following in attempt to educate my self further.
Thank you Y8s I will check out the following in attempt to educate my self further.
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Sorry Mach, my bad for assuming you didn't get the base map from FM.
It really sounds like your current "tuner" is incompetent with Miatas and totally jerking you around. Is your car driveable with the base FM tune? I know of a couple of good dyno tuning shops in the far west Chicago suburbs that should be able to safely tune your car. PM me or email me if you want to go that route.
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Its a long story but purchased the FM system used had to purchase furtherer parts to make it work such as the Wide band. Shop never tuned it properly. Recently blew it up on the highway going way to fast and running way to lean actually smashed the hell out of the bearings. I am really on the shops *** now to tune it properly this time. If not I would either like to take it to FM and have Jeremy tune it but that would not be until spring or later in finding time. Chicago would work as well if I new a good reliable no bullshit tuner that new what they where doing. My shop one of the owners is a teacher at a local technical school and teaches tunning although I don't believe he has done his research on the hydra nor does he care to. I am pretty sure I could pay him more and would not get any further tunning. If anyone knows any good tuners around the Midwest that can tune my car I would appreciate it. I am almost at the point of scrapping the whole car. To much time and money and worries.
#20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Please get your car away from that shop before they do more irreparable damage to it! I don't know of any reputable dyno tuner that would let a customer's forced induction car leave their shop running LEAN on the top end. AMS in West Chicago has been tuning all-out forced induction sport impacts for a long time. Here's a link to their website:
4G63 | 4B11 | N54 | VR38VETT | EJ25 | Leading Turbo Tuners for Drag Racing | Road Racing | Time Attack | Martin Musial | Chris Black | AMS Dyno Tuning
I have been to their old shop (club dyno day) and was really impressed with the quality of their work and their attention to detail as well as their safe tune vs. borderline tune philosophy. Their new shop is about twice the size of the old shop and has an even better dyno. You'll be hard pressed to find a better tuner than Martin.
4G63 | 4B11 | N54 | VR38VETT | EJ25 | Leading Turbo Tuners for Drag Racing | Road Racing | Time Attack | Martin Musial | Chris Black | AMS Dyno Tuning
I have been to their old shop (club dyno day) and was really impressed with the quality of their work and their attention to detail as well as their safe tune vs. borderline tune philosophy. Their new shop is about twice the size of the old shop and has an even better dyno. You'll be hard pressed to find a better tuner than Martin.