Best injectors for obiwan link
#1
Thread Starter
Junior Member
iTrader: (1)
Joined: Jul 2015
Posts: 93
Total Cats: 14
From: Denver, CO
Best injectors for obiwan link
Hi,
What injectors would best match my build? It's a 1997 miata with a FM voodoo 2 kit/ GT2560R getting an obiwan link. Looking to run about 12PSI. What injector would best suit my needs/be the "easiest" to tune:
- RX8 440cc
- RC550cc
- Flow Force 610cc
No matter what I'd be buying them rebuild/flow tested. I'd really like the flowforce but I'm not sure the link can handle them.
Thanks in advance
What injectors would best match my build? It's a 1997 miata with a FM voodoo 2 kit/ GT2560R getting an obiwan link. Looking to run about 12PSI. What injector would best suit my needs/be the "easiest" to tune:
- RX8 440cc
- RC550cc
- Flow Force 610cc
No matter what I'd be buying them rebuild/flow tested. I'd really like the flowforce but I'm not sure the link can handle them.
Thanks in advance
#4
Thread Starter
Junior Member
iTrader: (1)
Joined: Jul 2015
Posts: 93
Total Cats: 14
From: Denver, CO
I ended up with the EV610s and had some issues getting them to idle since they have different dead times than the rc550s the software was written for. The car would idle very lean and get very rich off idle. Luckily fuel injector offset (z830) is the same as injector dead zone. After a bit of tweaking the car came back in line. These injectors are pretty baller!
#6
I ended up with the EV610s and had some issues getting them to idle since they have different dead times than the rc550s the software was written for. The car would idle very lean and get very rich off idle. Luckily fuel injector offset (z830) is the same as injector dead zone. After a bit of tweaking the car came back in line. These injectors are pretty baller!
Thread
Thread Starter
Forum
Replies
Last Post