Trackspeed Stage 2 VVT shortblock, EFR6758, E85, 452whp/427wtq@26psi. I'm scared.
#1
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm scared of this one ![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
Motor:
The lower lines are what I will drive it at, 415whp/386wtq and ~84% peak duty cycle. Peak of 265kpa, holding ~258kpa all the way through. ~23psi of boost. At that power level it wants to turn the tires in 4th gear at 90mph on dry pavement.
That's it. My goal was 400whp, anything beyond that was gravy. With a usable, safe (lol) 415whp and an Internet Hero-Pull(TM) map at 450whp+, I couldn't be happier. There's nothing further planned for the powerplant in this car.
Excuse me while I update my life insurance policy.
![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
Motor:
- Trackspeed "Stage 2" shortblock
- 83.5mm Supertech 8.6:1 piston w/ thermal coating
- Manley H-beam rods
- ACL Race bearings
- ARP head/main studs
- Boundary Stage 2 oil pump
- OEM untouched BP6D head
- OEM valves
- OEM solid lifters
- Supertech heavy double valvesprings
- OEM BP6D cams
- OEM EUDM Squaretop manifold
- Trackspeed Turbo Kit w/ BW EFR6758 0.64a/r
- Precision 350hp intercooler
- prototype Trackspeed IC pipes
- Enthuza 3" exhaust
- MSLabs MS3 Basic w/ CAN Wideband
- Innovate LC-2
- Injector Dynamics ID1000 (96%DC max, lol)
- Walbro 455lph E85 fuel pump
- Rewired fuel pump (dedicated relay)
- OEM BP6D fuel rail, OEM returnless forward of FPR
- Fuelab 535 FPR (60psi w/ 1:1 boost reference)
- Fuelab 818 filter (6ppm Fiberglass media)
- E85 (80% actual content)
- prototype Trackspeed GM D585 coils
The lower lines are what I will drive it at, 415whp/386wtq and ~84% peak duty cycle. Peak of 265kpa, holding ~258kpa all the way through. ~23psi of boost. At that power level it wants to turn the tires in 4th gear at 90mph on dry pavement.
That's it. My goal was 400whp, anything beyond that was gravy. With a usable, safe (lol) 415whp and an Internet Hero-Pull(TM) map at 450whp+, I couldn't be happier. There's nothing further planned for the powerplant in this car.
Excuse me while I update my life insurance policy.
![Name: dAh1SEjh.jpg
Views: 148
Size: 100.1 KB](https://www.miataturbo.net/attachments/dynos-timesheets-21/229655d1683052045-trackspeed-stage-2-vvt-shortblock-efr6758-e85-452whp-427wtq%4026psi-im-scared-dah1sejh.jpg)
Last edited by Savington; 04-10-2018 at 02:42 PM.
#10
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The pressure plate is an off-the-shelf ACT 1.8L XT. The disc is a custom piece with an organic/feramic friction surface (full-face organic on one side, pucked feramic on the other). The dual-friction setup is supposed to add ~20% or so to the standard ACT setup. At 23psi I am right at the theoretical limits of the clutch, at 26psi I'm past them. I have a new proto piece rated in the 450wtq range on the shelf that will go in soon.
Last edited by Savington; 11-07-2017 at 07:02 PM.
#13
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Last edited by DeerHunter; 11-08-2017 at 12:38 AM. Reason: Lack of proofreading
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If you can refrain from taking it to the track, a Quaife gearset will likely give you off the guardrail and/or reduce the chance of a stunting ticket. While my car isn't quite as nutso as yours, it hooks up completely in 2nd. Alternatively, this might create the impetus for you to finish development of that T5 kit. Either way, very, very noice.
![eek](https://www.miataturbo.net/images/smilies/eek3.gif)
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The Quaife gears are beefy and will put up with tons of abuse (I autocrossed for years with my first set, with numerous smoky burnouts aimed at impressing the hoi polloi). It was only once I started tracking that they failed. My theory is that the 5-speed case can't handle the heat, starts expanding and the gears no longer mesh properly. A chipped tooth will inevitably result.
I'm considering the KMiata swap, but am reluctant to discard my really cool (and bulletproof) Guru billet differential. Besides, I retired my '93 from track duties and now have an MSM to fill that role.
#20
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The BMW 6sp swap is on the shortlist for trans options. The shorter 1-2 ratios are annoying but not a huge issue in a car that will spin 1st and 2nd anyway. I would only consider it if I can use an OEM rear diff, since I don't want to hassle with aftermarket parts or solid/poly mounts back there if I don't need to. For now, I am just being nice to the 6-speed - no more hard shifts, trying to limit WOT use in 3rd and 4th. It pulls hilariously hard in 5th anyway
![](https://www.miataturbo.net/images/smilies/smile.gif)