Greddy @ 14psi, 247hp, 217lb/ft @ DIYautotune
#42
Elite Member
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
i wonder if diy will ever release some maps for boost for mspnp. something that would work to about 6psi on stock injectors perhaps? something safe? then we would have MUCH less blown engines from noobs.
#43
Senior Member
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I found that the diy maps in boost had very conservative timing and around 10:1 afr on my car. That is with 460cc injectors but that shouldnt make a difference because i changed my req. fuel. Has anyone actually blown their motor by running the diy mspnp map in boost?
#46
Elite Member
Thread Starter
iTrader: (24)
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,537
Total Cats: 42
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So I did as Brain suggested and changed the DC to 100 in the first row (and then adjusted for it in the other rows, going back and forth with MLV), but the BCDCgauge in megatune still shows 0 at idle... when he key is on 2 or when I'm cranking it shows 100 but then immediately drops to 0 when the car fires.
#48
Elite Member
Thread Starter
iTrader: (24)
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,537
Total Cats: 42
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It seems to respond better.. but the prior table was sending me straight into the boost limiter (220 kpa). My new one keeps me from running into the limiter at night or in the morning when it's colder.
Thread
Thread Starter
Forum
Replies
Last Post