When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Since you know everything that i NEED to do why don't i just let u borrow the car for a couple years so u can make it right for me. If u could actually read youd know i cant use EBC or it will spike. Ive tried standalone ebc, mbc, and hydra ebc. The only way it wont spike is straight spring pressure
Since you know everything that i NEED to do why don't i just let u borrow the car for a couple years so u can make it right for me. If u could actually read youd know i cant use EBC or it will spike. Ive tried standalone ebc, mbc, and hydra ebc. The only way it wont spike is straight spring pressure
If it's not creeping on spring pressure an EBC should be able to maintain the same target boost. You just need to keep working on the tune. If you for instance find where it spikes and bleed it off early enough you should prevent the spike. There is no reason that an EBC would cause a spike over just the spring rate other than it not being tuned correctly.
I have an aem tru boost. I can set at which pressure the solenoid stops sending pressure to the top of the diaphragm(holding it closed)
If i set that number near or above the spring pressure, it will spike when i shift at high rpms
this is from the previous run. it spools fine. like i said, the wg just opens way earlier than target psi. and if i use ebc to hold it closed longer, it spikes on up shifts.
im happy rn. i made good power to beat mustangs at the strip and not crazy torque to blow the stock engine. im happy asf for 261 whp on a conservative timing map that will never knock
Good power as expected (for that much timing/boost). What really surprises me about the torque is how flat it is and how flat it stays all the way up, but then it looks like you're dropping timing from 19 to 16 if it goes to 14 like you say.
I'd congratulate you on really clever tuning (this is about the least abusive way to make 250 and try to keep the rods intact) but it looks like you got that result on accident lol
Yeah I knew I was going to get flamed for the lack of torque but im actually happy about it for the stock rods. Its just preparing me for the feeling of a big turbo car when i go gt2871 in the future.
Next is 1320 trap speed
ALSO---- thank u for telling me to get a baseline number. I could've started turning things up on the street and popped the engine. I didnt think i was anywhere near the "limit"