Any news on Mspnp for 96/97?
#6
I dont have the base map. I have a built NA motor with a 99 head, OS valves, higher compression, etc, etc. When I asked Jerry if my map would be a good, conservative base map for others to start from he said "yeah, fall on your face conservative!"
the 94-95 engine is not much different than the 96-97 except a half point of compression I think, so it probably will not be much different.
the 94-95 engine is not much different than the 96-97 except a half point of compression I think, so it probably will not be much different.
#7
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,102
It's 2/10ths of a point, and the switch was 3/95 so half the 95 cars have the true 9.0:1 motors vs. the early 1.8s having the 8.8:1 pistons.
I helped install an MM9697 beta a few weeks ago, so they're either putting the finishing touches on or they are waiting on a supplier for cases or something. Either way, it's gonna be soon.
I helped install an MM9697 beta a few weeks ago, so they're either putting the finishing touches on or they are waiting on a supplier for cases or something. Either way, it's gonna be soon.
#8
I would imagine that it's going to be real soon. I just got mine back from DIY which they were using as a mule to get everything perfect. Jerry's got the PNP running real smooth on my stock 97. Got it to pull 116 whp with the maf.
#10
We're getting the final production version of the circuit board printed up, so expect them for sale in February.
#16
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
FYI there are nothing but pre-release maps out there right now, things could be tweaked a bit here and there...
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#17
Elite Member
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
i need SOME maps to start with. ill fine-tune them myself. i mostly care about settings and stuff like that. also i would like those maps because it idles and my car has been sitting for 2 months and i forgot to fix my idle issues before parking it :/
PLEASE! send me that msq. i beg you!
PLEASE! send me that msq. i beg you!
#18
I don't understand why you're so nuts about getting this MSQ. A working MSQ that your car would run great on given some "fine tuning" is and has been available for a long while. The 94/95 map is a great place to start.
#19
If you need just some MSQ to start, the '94-'95 map will get you in the ballpark for a stock '96-'97. While the two maps are not quite the same and you will need some fine tuning, a '96-'97 car can run on the older map.