What turbo manifold to get? There arent many options out there....
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm looking around for turbo manifolds for a 1.8l 96 miata but I am having a hard time finding them. The only ones were the JGS, Begi, and HKS. Are there any other ones out there that I am missing? I cant seem to find any other turbo manifolds.
#11
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
But seriously, I'd rather have a stroke than deal with Bell Engineering ever again. Go with a custom manifold from Absurdflow or order a manifold/downpipe combo from FM (you can order individual parts from them), source your own turbo/water lines, and buy an intercooler and generic pipe kit from eBay and fabricate/assemble it yourself.
#13
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You're an idiot if you go with cast iron. I don't even know if Tim will make another absurdflow manifold for you, but if you don't buy that you're a moron too. You can read through the long *** threads on here and come to those conclusions yourself.
#15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ive been reading a lot of the old threads and still don't see a straight answer to choose cast iron or tubular. I see that the JGS manifold cracked on some people already but am not sure if the JGS cast manifold will 'always' crack or only a few percentages cracked. The Begi seems to have bad airflow. So that really only leaves the option to absurdflow. Though the price for absurdflow is really high (as I am only planning to boost 6-7 psi only and don't want to spend that much on a turbo manifold). I have pieced turbo system already but am having a lot of trouble finding/deciding which manifold to get. There doesn't seem to be a certain manifold that everyone gets and recommends.
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
But seriously, I'd rather have a stroke than deal with Bell Engineering ever again. Go with a custom manifold from Absurdflow or order a manifold/downpipe combo from FM (you can order individual parts from them), source your own turbo/water lines, and buy an intercooler and generic pipe kit from eBay and fabricate/assemble it yourself.
#18
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If you want to track the car and you buy something other than a v-band manifold you're wasting your money.
#19
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,340
Total Cats: 6,800
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Under these conditions, cast manifolds using conventional hardware seem to have trouble with the studs / nuts holding the turbo to the manifold loosening. We're not talking about turbos falling off or anything, just enough to cause a leak. A couple of companies are looking into the use of studs made from a material that was given to the CIA by aliens in 1953 (in exchange for a permit to harvest as many cow lips as they desire) and just recently acquired by the mainstream metallurgists' community, at a cost of many lives. No real-world data yet on their effectiveness.
#20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The only real factor here is whether or not you do track days. And I don't mean AutoX, we're talking 30+ minute sessions at >100 MPH where you're at WOT most of the time.
Under these conditions, cast manifolds using conventional hardware seem to have trouble with the studs / nuts holding the turbo to the manifold loosening. We're not talking about turbos falling off or anything, just enough to cause a leak. A couple of companies are looking into the use of studs made from a material that was given to the CIA by aliens in 1953 (in exchange for a permit to harvest as many cow lips as they desire) and just recently acquired by the mainstream metallurgists' community, at a cost of many lives. No real-world data yet on their effectiveness.
Under these conditions, cast manifolds using conventional hardware seem to have trouble with the studs / nuts holding the turbo to the manifold loosening. We're not talking about turbos falling off or anything, just enough to cause a leak. A couple of companies are looking into the use of studs made from a material that was given to the CIA by aliens in 1953 (in exchange for a permit to harvest as many cow lips as they desire) and just recently acquired by the mainstream metallurgists' community, at a cost of many lives. No real-world data yet on their effectiveness.
![Laugh](https://www.miataturbo.net/images/smilies/laugh.gif)