What do you think about this Intercooler?
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: SE MI
Posts: 504
Total Cats: -3
What do you think about this Intercooler?
Hi
I'm planning on putting together a turbo kit for my '99 miata and have a question what do you think about this intercooler:
http://cgi.ebay.com/ebaymotors/Bar-P...21642305QQrdZ1.
I'm planning on using this:
-t3/t4 turbo or if I will get a good deal on a gt35r than that is going on instead
-greddy type-rs bov
-tial 44mm wastegate
-that^ intercooler
-EMU or MS
-3" exhaust
-will make a manifold by my self
Thanks for your opinons
EDIT:Thank's for moving. Didn't know if it fits the DIY if I'm asking for opinions on a intercooler
I'm planning on putting together a turbo kit for my '99 miata and have a question what do you think about this intercooler:
http://cgi.ebay.com/ebaymotors/Bar-P...21642305QQrdZ1.
I'm planning on using this:
-t3/t4 turbo or if I will get a good deal on a gt35r than that is going on instead
-greddy type-rs bov
-tial 44mm wastegate
-that^ intercooler
-EMU or MS
-3" exhaust
-will make a manifold by my self
Thanks for your opinons
EDIT:Thank's for moving. Didn't know if it fits the DIY if I'm asking for opinions on a intercooler
Last edited by Dhaark; 08-24-2006 at 01:00 PM. Reason: read
#2
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
do you have a/c?
It's the same intercooler as some of us here are using (myself included) although we've opted for the 12x18x3 version.
I'm not sure on a 99 but on a 90-97 it should fit in perfectly if you don't have a/c
It's the same intercooler as some of us here are using (myself included) although we've opted for the 12x18x3 version.
I'm not sure on a 99 but on a 90-97 it should fit in perfectly if you don't have a/c
#4
Sorry to threadjack, but does this one look like a good size for an over the rad setup?
http://cgi.ebay.com/ebaymotors/Front...mZ330011892274
http://cgi.ebay.com/ebaymotors/Front...mZ330011892274
#6
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
Sorry to threadjack, but does this one look like a good size for an over the rad setup?
http://cgi.ebay.com/ebaymotors/Front...mZ330011892274
http://cgi.ebay.com/ebaymotors/Front...mZ330011892274
#8
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
It's the best way to tell. Typically the only thing thats in the way with teh a/c is the dryer. But once you get up in the mouth youll be able to see what you can fit. I took a bunch of measurements and went online to see what I could find. What I ended up with fit perfectly in the center of the mouth and I had .5" of clearance from the a/c dryer, so I was happy.
#11
I plan on a slightly smaller version of that same intercooler as Braineak said here:
http://cgi.ebay.com/ebaymotors/28X7X...spagenameZWDVW
In fact, that auction is closed because I just bought it... too late suckas, it's mine!!!
http://cgi.ebay.com/ebaymotors/28X7X...spagenameZWDVW
In fact, that auction is closed because I just bought it... too late suckas, it's mine!!!
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM