Turbo Plans and Price List
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hi all, I've been putting together my plans for boosting my 1990 Miata. All of my information has been gathered from this forum (much thanks to Braineack's excellent diy faq), and Corky's book, Maximum Boost. My goals are to have a car that can be comfortably daily driven, so I'd like to make around 200 hp. I put together a price sheet to track what I'll need, and I hope I've been pretty realistic. I went overboard on a few things, such as injectors, in case I want to make more horsepower later on. I also know I'll need a Torsen, and that'll just be predicated on when a good deal comes up on Craigslist or on a forum. Stage one of my build is just to learn to tune. Install MS and drive around with it long enough to get comfortable with using TunerStudio to accomplish my goals. The parts listed in that section (intake piping and whatnot) are specifically to replace my AFM while still being able to use my Jackson Racing intake. After I feel good using MS, it's on to stage two, where the fun really happens.
My goal is to be economically wise without cheaping out on anything important. Obviously there are going to be incidentals (cables, hoses, etc), that I don't have listed, that'll probably add another few hundred dollars to the total. If anybody sees a part on my list that should be replaced with an alternative, please feel free to chime in. I appreciate all the info that's available here, and I want to do this right the first time.
Thanks,
Dan
My goal is to be economically wise without cheaping out on anything important. Obviously there are going to be incidentals (cables, hoses, etc), that I don't have listed, that'll probably add another few hundred dollars to the total. If anybody sees a part on my list that should be replaced with an alternative, please feel free to chime in. I appreciate all the info that's available here, and I want to do this right the first time.
Thanks,
Dan
![](http://i54.photobucket.com/albums/g106/ddcronk/Screen%20Shot%202016-04-24%20at%204.02.13%20PM_zpsvtzf4grh.png~original)
#2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You'll want EGT.
FM stage 1 clutch is cheaper and probably better, more than enough for a T25 build.
I would get at least RX8 injectors. The RX7's are old and their spray hurts mpg.
You can save a lot on the blow off valve going with a 25$ bosch unit. Should also be enough for a T25.
You forgot plugs, turbo flanges, water lines, air intake filter (unless you already took that into consideration)
Here's a link to my excel table
https://www.dropbox.com/s/r9kfauuy42...0ver.xlsx?dl=0
FM stage 1 clutch is cheaper and probably better, more than enough for a T25 build.
I would get at least RX8 injectors. The RX7's are old and their spray hurts mpg.
You can save a lot on the blow off valve going with a 25$ bosch unit. Should also be enough for a T25.
You forgot plugs, turbo flanges, water lines, air intake filter (unless you already took that into consideration)
Here's a link to my excel table
https://www.dropbox.com/s/r9kfauuy42...0ver.xlsx?dl=0
#3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
EV1 RX7 injectors have no business on any new miata projects.
Get these instead:
http://www.flowforceinjectors.com/pr...ctor-kit-miata
Get these instead:
http://www.flowforceinjectors.com/pr...ctor-kit-miata
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You'll want EGT.
FM stage 1 clutch is cheaper and probably better, more than enough for a T25 build.
I would get at least RX8 injectors. The RX7's are old and their spray hurts mpg.
You can save a lot on the blow off valve going with a 25$ bosch unit. Should also be enough for a T25.
You forgot plugs, turbo flanges, water lines, air intake filter (unless you already took that into consideration)
Here's a link to my excel table
https://www.dropbox.com/s/r9kfauuy42...0ver.xlsx?dl=0
FM stage 1 clutch is cheaper and probably better, more than enough for a T25 build.
I would get at least RX8 injectors. The RX7's are old and their spray hurts mpg.
You can save a lot on the blow off valve going with a 25$ bosch unit. Should also be enough for a T25.
You forgot plugs, turbo flanges, water lines, air intake filter (unless you already took that into consideration)
Here's a link to my excel table
https://www.dropbox.com/s/r9kfauuy42...0ver.xlsx?dl=0
#9
SadFab CEO
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
EV1 RX7 injectors have no business on any new miata projects.
Get these instead:
http://www.flowforceinjectors.com/pr...ctor-kit-miata
Get these instead:
http://www.flowforceinjectors.com/pr...ctor-kit-miata
No. Look up.
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I think you can build it for that much but you are going to really need to be on the forums a lot and grab up stuff quick. I was able to come in at $2553.45 including a coolant reroute, Inconel hardware and MSPNP. It took me about a year of collecting parts and reading on MT to get there. I also went with RX-7 460cc injectors. They are not very efficient but there is a lot of documented data on them and they were easy to get idle correct while still maintaining about 80% duty cycle at 11psi. I am content with them but if I could do it again I would look for some ID1000s for E85. You are going to need a radiator as well. I went cheap on the Ebay unit and it works well for my application (autocross car that I put maybe 2k miles on a year). With the coolant reroute, stock fan, and the larger aluminum radiator I hover around 190* even under heavy mountain driving (I live very close to Deal's Gap). Good luck on your build, you're on your way to a fun and dependable system but you may have to overshoot that budget a bit.
The image is just a small snip of a much larger spreadsheet I've kept on the car over the past 3 years.
The image is just a small snip of a much larger spreadsheet I've kept on the car over the past 3 years.
![](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/170243-turbo-plans-price-list-turbo%2520build_zpslejhud1g.jpg?dateline=1462113618)
Last edited by 90civichhb; 05-01-2016 at 11:08 AM.
#16
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This is Curly's old kit, an early ARTech manifold/DP with an SR20 turbo he rebuilt and added TSE studs and locking hardware. Honestly if you buy from members on the board they are likely to have a decent kit as everyone keeps people in check on what works and what doesn't. Used items will have some issues though. I had to get the T2 flange milled and make a few more relief cuts in the manifold. I also picked up a better oil drain fitting, one with allen head bolts and an o-ring for ease of maintenance.
Here is my build thread if you are interested. I like to follow people starting new builds but rarely do I see them stick to a small budget and half never finish their build before they sell it all off.
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
aidandj pointed you in the right direction. I did pretty much exactly what you have planned. Installed wideband (LC-2) and Megasquirt (DIYPNP, I would really recommend MS3 if you can budget it) and learned the system. Read a bunch of threads, took logs, learned MegaLogViewer, and then installed a vTPS in the car. Started to tune fuel enrichment, messed with the VE table a bit for idle, got comfortable with some of the hiccups you will inevitably have, used VEAL. Enjoyed the new higher rev limit and mid-range torque bump just the base timing map gave. Raced the car like this for about a year while checking the forums everyday for a deal to pop up.
This is Curly's old kit, an early ARTech manifold/DP with an SR20 turbo he rebuilt and added TSE studs and locking hardware. Honestly if you buy from members on the board they are likely to have a decent kit as everyone keeps people in check on what works and what doesn't. Used items will have some issues though. I had to get the T2 flange milled and make a few more relief cuts in the manifold. I also picked up a better oil drain fitting, one with allen head bolts and an o-ring for ease of maintenance.
Here is my build thread if you are interested. I like to follow people starting new builds but rarely do I see them stick to a small budget and half never finish their build before they sell it all off.
This is Curly's old kit, an early ARTech manifold/DP with an SR20 turbo he rebuilt and added TSE studs and locking hardware. Honestly if you buy from members on the board they are likely to have a decent kit as everyone keeps people in check on what works and what doesn't. Used items will have some issues though. I had to get the T2 flange milled and make a few more relief cuts in the manifold. I also picked up a better oil drain fitting, one with allen head bolts and an o-ring for ease of maintenance.
Here is my build thread if you are interested. I like to follow people starting new builds but rarely do I see them stick to a small budget and half never finish their build before they sell it all off.
i might even just sack it and get the mkturbo kit, it helps relieve the welding and extras i have todo when custom fabricating my own kit. i really am planning my budget as:
downpipe + mani + turbo + exhaust = $1500, mkturbo
DIYmspnp2 - $1000
ebay intercoolor - $120
piping, WBo2, gauges, - $200
extra **** $100
injectors $100
still expensive but **** it. worth it for that braahp
anyways, any other forums you reccomend for checking on deals? obviously here, mazdaroaster, miata.net, /r/miata not sure what else.
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
downpipe + mani + turbo + exhaust = $1500, mkturbo
DIYmspnp2 - $1000
ebay intercoolor - $120
piping, WBo2, gauges, - $200
extra **** $100
injectors $100
still expensive but **** it. worth it for that braahp
anyways, any other forums you reccomend for checking on deals? obviously here, mazdaroaster, miata.net, /r/miata not sure what else.
DIYmspnp2 - $1000
ebay intercoolor - $120
piping, WBo2, gauges, - $200
extra **** $100
injectors $100
still expensive but **** it. worth it for that braahp
anyways, any other forums you reccomend for checking on deals? obviously here, mazdaroaster, miata.net, /r/miata not sure what else.
Piping + wideband + boost gauge is more like 300.
Extra **** (including bov) will be more like 400-500 by the time all is said and done and you buy gaskets, hoses, etc.
So now you're at like $4k.
#20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
downpipe + mani + turbo + exhaust = $1500, mkturbo
DIYmspnp2 - $1000
ebay intercoolor - $120
piping, WBo2, gauges, - $200
extra **** $100
injectors $100
anyways, any other forums you reccomend for checking on deals? obviously here, mazdaroaster, miata.net, /r/miata not sure what else.
As for other sites your local Craigslist will be a good resource and whatever local Facebook groups you may have that are centered around car parts/miatas. I am in about 5 or 6 different groups locally and that is how I got decent deals on things like IC pipe and my front mount.