Super productive day.
#1
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I was able to do the following:
fix my brake squeal. (anti-squeal goo on pad backs)
fix my TPS.
fix my wobbly crank pulley, replaced it with one off my old motor, the a/c section was crooked and it was noisy, like birds chirping.
This lead me to have to redo my timing belt. A bolt sheared off and i couldn't remove it. So I replaced the plate that the pulley bolts to. When tightening the main bolt, I made the lower cog jump a few teeth :(
Install an amp, head unit, and new door speakers. Coaxials with tweeters and crossovers. Cut 2" holes in my door panels and affixed the tweeters in a pretty nice looking fashion. Sounds amazing. I'll do headrest speakers eventually, but this car had no wiring for anything. There wasn't even an illumination wire or any speakers wires on the factory harness.
regapped my plugs to .040"
Semi-shrouded my IC and Rad. Basically bolted an aluminum panel form the front bumper straight across and then attaches at the fans behind the rad. Still need to do the sides, but this is a step in the right direction.
Things I didn't get to:
Build my extractor hood.
flash hi-res code
install my 1000uF cap for my COPs.
install a smaller restrictor on my oil inlet fitting.
I'll have pics of the stuffs tomorrow morn. Watch out for the best video ever too.
fix my brake squeal. (anti-squeal goo on pad backs)
fix my TPS.
fix my wobbly crank pulley, replaced it with one off my old motor, the a/c section was crooked and it was noisy, like birds chirping.
This lead me to have to redo my timing belt. A bolt sheared off and i couldn't remove it. So I replaced the plate that the pulley bolts to. When tightening the main bolt, I made the lower cog jump a few teeth :(
Install an amp, head unit, and new door speakers. Coaxials with tweeters and crossovers. Cut 2" holes in my door panels and affixed the tweeters in a pretty nice looking fashion. Sounds amazing. I'll do headrest speakers eventually, but this car had no wiring for anything. There wasn't even an illumination wire or any speakers wires on the factory harness.
regapped my plugs to .040"
Semi-shrouded my IC and Rad. Basically bolted an aluminum panel form the front bumper straight across and then attaches at the fans behind the rad. Still need to do the sides, but this is a step in the right direction.
Things I didn't get to:
Build my extractor hood.
flash hi-res code
install my 1000uF cap for my COPs.
install a smaller restrictor on my oil inlet fitting.
I'll have pics of the stuffs tomorrow morn. Watch out for the best video ever too.
#7
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
it was 95 and thunderstorms today at 1pm. then at 3pm it was 70 and sunny.
I spent the day cleaning out **** from my house so I can move less of it to the new house right down the street from mr brainy man.
I spent the day cleaning out **** from my house so I can move less of it to the new house right down the street from mr brainy man.
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I ripped the entire roof off of my carport today.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#16
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I wanna play...my undertray seems to be working out. 75ish out like 100% humidity, after 30min log and the fans never came on once. And after finally putting my heatshield back on my I don't have as bad of heatsoak at idle.
#17
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
like dan said, alpine amp and speaker, infinity tweeters and crossovers.
the HU is an Eclipse, cira 1997. Unfortuneatly after installing i discovered the volume up button is stuck....i assume in shipping, so I'll have to replace it.
I sweat my *** off today and barely did any work. in VA we have three seasons. Fall Winter Summer.
#20
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
must have been nice to have a day to dedicate to working on the car.
I got led around by my dick to my so's company's party. Wasted the whole day. Then met dopplebadgerdrifter and his so for dinner, then post-dinner.
I got led around by my dick to my so's company's party. Wasted the whole day. Then met dopplebadgerdrifter and his so for dinner, then post-dinner.