Replacing my China T04e hunk of shit
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
My current specs:
![](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/120530d1407985486-replacing-my-china-t04e-hunk-shit-setup.jpg)
stock 1.6L
627cc EV14 GT500 injectors
Toyota COPs
Megasquirt II
homemade log with external wastegate
ebay intercooler & bov
2.5" downpipe with 3" exhaust (homemade)
China T04e .63 a.r. with these specs:
Compressor Wheel
0.50 A/R Cold Side
Ind: 52.76 mm
Exd: 75.46 mm
Trim: 48.9
Turbine Wheel 0.58
Ind: 57.75 mm
Exd: 73.35 mm
Trim: 61.9
I am running this setup on 15psi and I'm getting full boost at around 4300rpm. Fun on the highway, but not ideal. Turbo is oversized.
I had good luck with the longevity of the ebay turbo, so I figured I'd give another a try. I'd like to keep my T3 manifold.
I would like a turbo that is fully spooled at around 3500rpm while keeping the same type of top end power I am getting the T04e now(no idea what power I'm making now). I would like the turbo to be capable of 300rwhp (ish) and not suffer power drop off like 2554 and the like do.
I was reading about Brain's T3 endeavors (.48 a.r. hot side, .42 a.r. cold side) and I like the power he made (240ish rwhp @ 15psi?), but would I experience the top end drop off?
What about if I went with a .50 or even .60 a.r. cold side?
![](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/120530d1407985486-replacing-my-china-t04e-hunk-shit-setup.jpg)
stock 1.6L
627cc EV14 GT500 injectors
Toyota COPs
Megasquirt II
homemade log with external wastegate
ebay intercooler & bov
2.5" downpipe with 3" exhaust (homemade)
China T04e .63 a.r. with these specs:
Compressor Wheel
0.50 A/R Cold Side
Ind: 52.76 mm
Exd: 75.46 mm
Trim: 48.9
Turbine Wheel 0.58
Ind: 57.75 mm
Exd: 73.35 mm
Trim: 61.9
I am running this setup on 15psi and I'm getting full boost at around 4300rpm. Fun on the highway, but not ideal. Turbo is oversized.
I had good luck with the longevity of the ebay turbo, so I figured I'd give another a try. I'd like to keep my T3 manifold.
I would like a turbo that is fully spooled at around 3500rpm while keeping the same type of top end power I am getting the T04e now(no idea what power I'm making now). I would like the turbo to be capable of 300rwhp (ish) and not suffer power drop off like 2554 and the like do.
I was reading about Brain's T3 endeavors (.48 a.r. hot side, .42 a.r. cold side) and I like the power he made (240ish rwhp @ 15psi?), but would I experience the top end drop off?
What about if I went with a .50 or even .60 a.r. cold side?
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I think the turbo brain used is definitely a decent one for what it is, though I'm thinking it might have to be run full tilt to hit 300.
I don't think you're gonna find the "best of both worlds" here though. The only turbo's that will spool really good and make really good power all cost a pretty penny, not chinachargers.
I don't think you're gonna find the "best of both worlds" here though. The only turbo's that will spool really good and make really good power all cost a pretty penny, not chinachargers.
#5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I think the turbo brain used is definitely a decent one for what it is, though I'm thinking it might have to be run full tilt to hit 300.
I don't think you're gonna find the "best of both worlds" here though. The only turbo's that will spool really good and make really good power all cost a pretty penny, not chinachargers.
I don't think you're gonna find the "best of both worlds" here though. The only turbo's that will spool really good and make really good power all cost a pretty penny, not chinachargers.
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Garrett GT2860RS Turbo aka 'Disco Potato' - Full-Race.com
There's definitely a t3 EWG option for the 2860 at least. I'm interested in what you find though, cause I am thinking along the same lines for my car. I have pistons/rods but don't want EFR crazy 400whp, but would like a bit more than the brain 50-trim.
There's definitely a t3 EWG option for the 2860 at least. I'm interested in what you find though, cause I am thinking along the same lines for my car. I have pistons/rods but don't want EFR crazy 400whp, but would like a bit more than the brain 50-trim.
#11
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What software do I use for that? Can I use TunerStudio logs? The car has the engine out right now
I'm looking at eBay turbos, trying to keep it cheap. And might as well use an external gate since it's there.
Garrett GT2860RS Turbo aka 'Disco Potato' - Full-Race.com
There's definitely a t3 EWG option for the 2860 at least. I'm interested in what you find though, cause I am thinking along the same lines for my car. I have pistons/rods but don't want EFR crazy 400whp, but would like a bit more than the brain 50-trim.
There's definitely a t3 EWG option for the 2860 at least. I'm interested in what you find though, cause I am thinking along the same lines for my car. I have pistons/rods but don't want EFR crazy 400whp, but would like a bit more than the brain 50-trim.
#12
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Buy the $200 50 trim chinacharger T3 I was using and win at life.
I think Gospeed is the vendor that sells it now. It'll spool like a T25 and can support up to about 300rwhp with enough boost.
It'll make enough low-end torque that you can actually blow your shitty 1.6L rods and will be able to swap out in like 15 minutes.
I think Gospeed is the vendor that sells it now. It'll spool like a T25 and can support up to about 300rwhp with enough boost.
It'll make enough low-end torque that you can actually blow your shitty 1.6L rods and will be able to swap out in like 15 minutes.
#13
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yeah but with the same a/r a genuine BB turbo will spool better than a journal bearing churbo. How much better I'm not sure, I doubt there are many people who run a T3 EWG potato on a Miata.
I like Braineak's idea though. Get the T3 50 trim and see how much boost it will take before it asplodes so I know how much to run later
I like Braineak's idea though. Get the T3 50 trim and see how much boost it will take before it asplodes so I know how much to run later
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yes, you just plug in a log from MS, but it had to have been on a straight/flat/level road, in I think 3rd or 4th gear. Search "virtual dyno", we have a whole thread about it here. Its free.
The bottom line is I don't think you will find what you're looking for. You will either have to compromise spool or power.
But if anything, get the turbo that brain had cause it seemed to actually spool decent.
The bottom line is I don't think you will find what you're looking for. You will either have to compromise spool or power.
But if anything, get the turbo that brain had cause it seemed to actually spool decent.
#15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Buy the $200 50 trim chinacharger T3 I was using and win at life.
I think Gospeed is the vendor that sells it now. It'll spool like a T25 and can support up to about 300rwhp with enough boost.
It'll make enough low-end torque that you can actually blow your shitty 1.6L rods and will be able to swap out in like 15 minutes.
I think Gospeed is the vendor that sells it now. It'll spool like a T25 and can support up to about 300rwhp with enough boost.
It'll make enough low-end torque that you can actually blow your shitty 1.6L rods and will be able to swap out in like 15 minutes.
http://pages.ebay.com/motors/link/?n...928871&alt=web
#16
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
that looks like the EWG version of it, yes.
had a 42mm/60mm compressor wheel.
Since you don't need the wasgate actuator and v-band wastegate, that looks like a better deal for you. You might just need a different coupler off the turbo to your IC pipes since it flares up to like 2.25" IIRC, but other than that, you should be able to swap it fast. I was able to bolt mine in, on my BEGi manifold, on a lunch break.
Just be careful, that looks like a 4-bolt outlet, not the standard 5-bolt T3 outlet your DP is probably built for. you'd probably have to drill/tap two holes on it.
had a 42mm/60mm compressor wheel.
Since you don't need the wasgate actuator and v-band wastegate, that looks like a better deal for you. You might just need a different coupler off the turbo to your IC pipes since it flares up to like 2.25" IIRC, but other than that, you should be able to swap it fast. I was able to bolt mine in, on my BEGi manifold, on a lunch break.
Just be careful, that looks like a 4-bolt outlet, not the standard 5-bolt T3 outlet your DP is probably built for. you'd probably have to drill/tap two holes on it.
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Similar specs, 5-bolt exhaust (not sure if it's the standard T3 though). Much cheaper.
T04E T3 T4 48 A R 50 Trim Turbo turbocharger Compressor 300 HP Boost Stage III | eBay
T04E T3 T4 48 A R 50 Trim Turbo turbocharger Compressor 300 HP Boost Stage III | eBay