Oil feed line problem..
#1
Senior Member
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: South Eastern Wisconsin
Posts: 1,274
Total Cats: 0
Oil feed line problem..
Took the plug out of the block for the oil feed line, to find that the threads arent 1/8BSPT pipe thread, they are very course.. Anyone ever run into this problem?
#5
the pipe thread hole is on the oil pressure sending unit bung on the intake sid eof the motor. If you have a crate motor or 1.8 you get your oil from there but the original 1.6 people, get a nice fitting on the hot side of the motor that takes a metric to AN fitting. i got some through summit for like 20 bucks apeice i believe but cant remember exacltly. Dont forget to get some to attach to the turbo as well the turbo might vary from engine in thread profile to but this is just good times.
#7
Senior Member
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: South Eastern Wisconsin
Posts: 1,274
Total Cats: 0
I up untill recently lived in Carol Stream, IL, but moved back up north for my job. Still go to school down there every day in Glendale Heights though.. 150mile round trip comute FTL...
#12
yeah you need a fitting that is metric on one side and AN on the other.Yeah but Southern ILL would only be like an hour or 2 well worth it to help someone in my book. + im bored. http://store.summitracing.com/partde...5&autoview=sku
I dont remember the exact sizes but this is about what you will need. Off course you need to be sure of the block thread and your AN size first. i cant remember it off the top of my head.
I dont remember the exact sizes but this is about what you will need. Off course you need to be sure of the block thread and your AN size first. i cant remember it off the top of my head.
#13
Senior Member
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: South Eastern Wisconsin
Posts: 1,274
Total Cats: 0
yeah you need a fitting that is metric on one side and AN on the other.Yeah but Southern ILL would only be like an hour or 2 well worth it to help someone in my book. + im bored. http://store.summitracing.com/partde...5&autoview=sku
I dont remember the exact sizes but this is about what you will need. Off course you need to be sure of the block thread and your AN size first. i cant remember it off the top of my head.
I dont remember the exact sizes but this is about what you will need. Off course you need to be sure of the block thread and your AN size first. i cant remember it off the top of my head.
#15
https://www.miataturbo.net/forums/showthread.php?t=6520
This thread deals with it and hase some other links. I don't know which it turned out to be -3 AN or -4 AN
This thread deals with it and hase some other links. I don't know which it turned out to be -3 AN or -4 AN
#16
Senior Member
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: South Eastern Wisconsin
Posts: 1,274
Total Cats: 0
I was thinking trying to make something like this, dont pay attention to sizing im just throwing those out there..
[BLOCK][M10 X1.5 to 1/8BSP adapter peices][1/8BSPP to 6AN adapter in pics][for the win.]
1/8BSPP seems like something thats going to be hard to find...
[BLOCK][M10 X1.5 to 1/8BSP adapter peices][1/8BSPP to 6AN adapter in pics][for the win.]
1/8BSPP seems like something thats going to be hard to find...
#17
Senior Member
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: South Eastern Wisconsin
Posts: 1,274
Total Cats: 0
https://www.miataturbo.net/forums/showthread.php?t=6520
This thread deals with it and hase some other links. I don't know which it turned out to be -3 AN or -4 AN
This thread deals with it and hase some other links. I don't know which it turned out to be -3 AN or -4 AN