Need Fuel Management Info on NB
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Im planning on putting a td04 turbo in my 1999 Miata and running about 8pounds of boost. As far as intercooling and turbo plumbing and set up goes I have all that figured out, but my major issue is fuel management. I thought I would just put in a high pressure pump and a regulator in but then I found out the 99+ is a returnless system.... What do I need to do to make sure that my car runs rich enough after boost? I'm fairly new to mods and fuel systems so make it somewhat simple please.
#6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Anyway I'm not really looking for just info on an ecu system. I was planning on doing just a simple chip and tune but if worse comes to worse and I have to get a whole ecu I would go with megasquirt but you know... College and project car money don't really go hand in hand. So I'm looking for information on like regulators and injectors and whatnot. I'm going to put in a Walbro Fuel Pump 190LPH-HP but the returnless system has me stumped on regulators. I was going to do a rising rate begi one but I can't because the pressure is MAP independent
#9
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You don't even need the bigger fuel pump. Stock is usually good somewhere in the 200-240whp range.
FlowForce EV14 injectors from TrackSpeed Engineering are the injectors you want.
A MS3X of some variant is what you as an ecu. You can get one from Braineack in the for sale section, or from MSLabs through Trackspeed engineering, or from DIYAutoTune.
FlowForce EV14 injectors from TrackSpeed Engineering are the injectors you want.
A MS3X of some variant is what you as an ecu. You can get one from Braineack in the for sale section, or from MSLabs through Trackspeed engineering, or from DIYAutoTune.
#10
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The ECU is going to be your golden goose of your entire build. Everything else will be moot if you go about things *** backwards like a mr2 in the rain.
You don't want to 'chip anything, BELIEVE ME.
If you don't want to do anything but just want some boost, a FM kit with a voodoo box is your best bet. Shiuend may have to confirm if that bandaid would work.
If I were you, I'd pickup a MKTurbo setup and go from there. Some sort of ev14 injectors that will work with the ecu you choose.
You don't want to 'chip anything, BELIEVE ME.
If you don't want to do anything but just want some boost, a FM kit with a voodoo box is your best bet. Shiuend may have to confirm if that bandaid would work.
If I were you, I'd pickup a MKTurbo setup and go from there. Some sort of ev14 injectors that will work with the ecu you choose.
#12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Would an MSPNP2 work? Thank you for info on the injectors and pump. That actually saves me a lot of research. I have a td04 with boost controller, bov, all necessary plumbing along with a 28x7x2.5 intercooler. We're doing custom exhaust (including manifold). Just some background for you guys. And before you ask, the fab work for exhaust and all that won't be done by me. It will be a professional hookup I have.
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Alright I think I got everything I need. All in all I'll have those EV14 injectors, mspnp2, IAT sensor, wideband O2 with gauge, boost gauge, boost controller, bov, td04, intercooler, stage 1 ACT clutch, custom exhaust and all that, and probably another oil pressure gauge to make a solid 3 in my console. Sound good or am I missing anything?