NA Turbo Parts on an NB
#1
NA Turbo Parts on an NB
there is a local guy that is selling all the Turbo parts of him Miata. His is a 94-97 I have a 99.
Below is a list of what he has that I'm interested in.
T3/60-1 with a .63 a/r turbo.
1.8L Miata top mount turbo manifold.
Downpipe to go with Mani. and Turbo above
38mm Tial wastegate
Which of these things will fit/work on my car.
I've done a search on this site and m.net as well as read the DIY FAQ here and haven't found much info on cross compatibility.
Below is a list of what he has that I'm interested in.
T3/60-1 with a .63 a/r turbo.
1.8L Miata top mount turbo manifold.
Downpipe to go with Mani. and Turbo above
38mm Tial wastegate
Which of these things will fit/work on my car.
I've done a search on this site and m.net as well as read the DIY FAQ here and haven't found much info on cross compatibility.
#9
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
that turbo is good for 600HP & 28psi. It's exactly the opposite of what you're looking for in a turbo. As opposed to my straight up T3 (still considered larger to most miata guys) that's good for 300HP but still spools well below 5K. :gay:
#11
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
find out the A/R of the turbine.
edit: looks like you says it's a .63 A/R
i mean you could get away with bolting on a smaller compressor wheel/housing on it and keeping the 60-1 for a rainy day.
edit: looks like you says it's a .63 A/R
i mean you could get away with bolting on a smaller compressor wheel/housing on it and keeping the 60-1 for a rainy day.
#13
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
depends where you buy it. I picked up my super 60 wheel/housing/backplate for less than $100.
im just unsure how that turbo will react. i have a feeling it wont make good power till at least 4.5K.
im just unsure how that turbo will react. i have a feeling it wont make good power till at least 4.5K.
#19
Looks like I've confirm a deal with the guy that has these parts.
Here is what I'm getting.
T3/60-1 with a .63 a/r turbo.
1.8L Miata top mount turbo manifold.
Downpipe to go with Mani. and Turbo above
38mm Tial wastegate
drain line to the turbo and both oil fittings
k&n filter and intake elbow
cold side charge piping
If the Turbo ends up not being what i want I'll more than likely sell it. He is giving me a good enough of a price I should be able to get out of it pretty much what I'll have in it.
Now it's time to decide on Management in no certain order.
MS with a 94-94 CAS
Haltech
Hydra
AEM F/IC
PC-Pro
Here is what I'm getting.
T3/60-1 with a .63 a/r turbo.
1.8L Miata top mount turbo manifold.
Downpipe to go with Mani. and Turbo above
38mm Tial wastegate
drain line to the turbo and both oil fittings
k&n filter and intake elbow
cold side charge piping
If the Turbo ends up not being what i want I'll more than likely sell it. He is giving me a good enough of a price I should be able to get out of it pretty much what I'll have in it.
Now it's time to decide on Management in no certain order.
MS with a 94-94 CAS
Haltech
Hydra
AEM F/IC
PC-Pro
#20
Address: 10305-1 Jefferson St Jeffersontown KY 40299
Phone: (502)266-6646
Email: sales@autolabonline.com
AIM: AutoLabLLC
The Owners name is Bill Roberts. Great guy loves to talk about Turbos.
Tell him Mike sent ya.