My spool sucks, help me!
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Granada, Spain
Posts: 341
Total Cats: 2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I can't get more than 1-2 psi at 3k rpm no matter how much load i'm putting (also tried brake boosting). I have tried the following thing:
- tighten the wastegate arm
- run with no vaccum hose to the wastegate actuator
- retard spark
- advance spark
- add more fuel
- remove fuel
- retard/avdance vvt cam
- run open downpipe
'01 car with T3 60 trim 0.48 / 0.63, custom log manifold, stock injectors, stock clutch, adaptronic ems.
No intake boost leak, no pre-turbo exhaust leaks... what i'm doing wrong?![vash](https://www.miataturbo.net/images/smilies/vash.gif)
- tighten the wastegate arm
- run with no vaccum hose to the wastegate actuator
- retard spark
- advance spark
- add more fuel
- remove fuel
- retard/avdance vvt cam
- run open downpipe
'01 car with T3 60 trim 0.48 / 0.63, custom log manifold, stock injectors, stock clutch, adaptronic ems.
No intake boost leak, no pre-turbo exhaust leaks... what i'm doing wrong?
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![Name: fixedspool.png
Views: 199
Size: 8.4 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/201715d1501244569-my-spool-sucks-help-me-fixedspool.png)
#10
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Granada, Spain
Posts: 341
Total Cats: 2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I checked for leaks and is not leaking. I'm sure the wastegate is closing because the turbo makes tons of boost past 4.5-5k rpm.
I'm asking myself if the VTCS stuff could be causing the problem. In my car the VTCS is still conected to the stock ecu. I belive that the ecu disconnect vtcs past 60ēC or something... so the question is... since the adaptronic loom is emulating WT signal and I have no idea of the value that are throwing the resistors, maybe the vtcs is always closed and only open when rpm hit some kind of threshold value on the stock ecu.
Anybody knows more about how the stock ecu control the vtcs?
I'm asking myself if the VTCS stuff could be causing the problem. In my car the VTCS is still conected to the stock ecu. I belive that the ecu disconnect vtcs past 60ēC or something... so the question is... since the adaptronic loom is emulating WT signal and I have no idea of the value that are throwing the resistors, maybe the vtcs is always closed and only open when rpm hit some kind of threshold value on the stock ecu.
Anybody knows more about how the stock ecu control the vtcs?
#14
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Granada, Spain
Posts: 341
Total Cats: 2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Past 4.500 rpm the boost creeps very quick.
No locals with T3's unfortunately :(
#16
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Granada, Spain
Posts: 341
Total Cats: 2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
8.3 psi is the factory setting, same as my target boost, but i've tried to tighten to a herculean level...
MBC, also have an EBC but not installed yet.
I have dismantled several times the turbo, and the gate moves freely.
MBC, also have an EBC but not installed yet.
I have dismantled several times the turbo, and the gate moves freely.
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So you have tried to tighten the rod that goes to the waste gate flapper? I wouldn't bother with the EBC if the MBC you have is a ball and spring type. It's not going to help. After that check for boost leaks. I've had some silicone connectors fail before and it was hard to find. Also vvt problems are a possibility. Retarded cam timing will make boost build slower, and if it moves enough could cause the problems you describe. (I am not aware of how the later vvt works so I don't know how much of a problem this could cause)
Last edited by vw_nut; 01-02-2010 at 11:57 AM. Reason: reread for comprehension
#18
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I checked for leaks and is not leaking. I'm sure the wastegate is closing because the turbo makes tons of boost past 4.5-5k rpm.
I'm asking myself if the VTCS stuff could be causing the problem. In my car the VTCS is still conected to the stock ecu. I belive that the ecu disconnect vtcs past 60ēC or something... so the question is... since the adaptronic loom is emulating WT signal and I have no idea of the value that are throwing the resistors, maybe the vtcs is always closed and only open when rpm hit some kind of threshold value on the stock ecu.
Anybody knows more about how the stock ecu control the vtcs?
I'm asking myself if the VTCS stuff could be causing the problem. In my car the VTCS is still conected to the stock ecu. I belive that the ecu disconnect vtcs past 60ēC or something... so the question is... since the adaptronic loom is emulating WT signal and I have no idea of the value that are throwing the resistors, maybe the vtcs is always closed and only open when rpm hit some kind of threshold value on the stock ecu.
Anybody knows more about how the stock ecu control the vtcs?
Stock opens the VTCS at 3000 rpm. normally it only stays closed below 3000 and 60C, but if the adaptronic is jackin up your junk, it will cause problems.
but there's an easy way to test it...
On the front of the intake manifold, under the throttle body, is a vacuum actuator (similar to the wastegate one) that pulls the VTCS closed at startup. Just pull the hose off and plug the manifold side so it doesn't leak and see if it improves things.
#20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hola, saludos a Espaņa si te encuentras ayi. Mira el vtcs es algo como el puero secundario del mazda rx7 n/a y solamente funciona para una aplicacion sin turbo. En el rx7 esta operado de 2 maneras dependiendo de el modelo. La idea es de abrirse a las 4,500-5,000 revoluciones en el RX-7 y me imagino que en los miatas Mazda tuvo una idea similar, nadamas no se exactamente en que tiempo o que contrala cuando se sierra o se abre. Lo que se es que esta operado por una valvula de vaccum. Puede ser que se este serrando especialmente si cambian los niveles de vaccum con el systema de turbo.
Lo que te puedo decir es que desconectes la valvula esa para que este abierto todo el tiempo. Eso es de acuerdo a este articulo que por lo pronto te pueda interesar.
www.mazdaspeedy.com: Removing restrictive VTCS from intake manifold
Lo que te puedo decir es que desconectes la valvula esa para que este abierto todo el tiempo. Eso es de acuerdo a este articulo que por lo pronto te pueda interesar.
www.mazdaspeedy.com: Removing restrictive VTCS from intake manifold