Are my lines connected right? TURBO LEAK?? L@@K
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
https://www.miataturbo.net/forum/sea...earchid=719133
Look through those threads and read up on clocking the turbo. You'll understand what everyone is trying to tell you after you do some reading.
Look through those threads and read up on clocking the turbo. You'll understand what everyone is trying to tell you after you do some reading.
#22
Bannisheded
Thread Starter
iTrader: (33)
Join Date: Jan 2009
Location: San Jose, CA
Posts: 1,056
Total Cats: -3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ok, so i did how your DIY clocking thread said and its just how it should be, return line pointing down.
so now im with a bunch of custom piping that is useless to me now..which is perfectly fine cuz it is my fault of course for not doing research first..![Bang](https://www.miataturbo.net/images/smilies/bang.gif)
Magnamx-5 do you have any pictures showing how you did your piping for the 16g turbo. im a little confused on how i should have mines done.
please and thank you!!
so now im with a bunch of custom piping that is useless to me now..which is perfectly fine cuz it is my fault of course for not doing research first..
![Bang](https://www.miataturbo.net/images/smilies/bang.gif)
Magnamx-5 do you have any pictures showing how you did your piping for the 16g turbo. im a little confused on how i should have mines done.
please and thank you!!
#23
Bannisheded
Thread Starter
iTrader: (33)
Join Date: Jan 2009
Location: San Jose, CA
Posts: 1,056
Total Cats: -3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Alright well i just realized i can still keep the piping duhh, just turned the cold side of the turbo to its original position while still keeping the return line facing down.
but before i put the turbo back i blew the one side of oil lines and plugged the other side and i hear air coming out of the end of the hot side turbine.
did i blow my oil seals??
but before i put the turbo back i blew the one side of oil lines and plugged the other side and i hear air coming out of the end of the hot side turbine.
did i blow my oil seals??
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
my intake piping? dude i run WI i just ran straight to the Throttle boddy and for the feed and return i ran teflon inner stainless outer lines from my local hydraulics shop. probly but i would try it all the same either it leaks or it doesnt the compressor is sealed via a oring and the hotside is compression sealed. Alil silicone can help alot.
#29
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
there is no way for my to turn the turbo.
its stuck in that position because of a groove slot. plus i had all my piping custom cut and welded to fit the current position of the turbo.
the return port isnt exactly horizontal like the picture shows, it does point to the ground at like a 45* angle
its stuck in that position because of a groove slot. plus i had all my piping custom cut and welded to fit the current position of the turbo.
the return port isnt exactly horizontal like the picture shows, it does point to the ground at like a 45* angle
ok, so i did how your DIY clocking thread said and its just how it should be, return line pointing down.
so now im with a bunch of custom piping that is useless to me now..which is perfectly fine cuz it is my fault of course for not doing research first..![Bang](https://www.miataturbo.net/images/smilies/bang.gif)
Magnamx-5 do you have any pictures showing how you did your piping for the 16g turbo. im a little confused on how i should have mines done.
please and thank you!!
so now im with a bunch of custom piping that is useless to me now..which is perfectly fine cuz it is my fault of course for not doing research first..
![Bang](https://www.miataturbo.net/images/smilies/bang.gif)
Magnamx-5 do you have any pictures showing how you did your piping for the 16g turbo. im a little confused on how i should have mines done.
please and thank you!!
Alright well i just realized i can still keep the piping duhh, just turned the cold side of the turbo to its original position while still keeping the return line facing down.
but before i put the turbo back i blew the one side of oil lines and plugged the other side and i hear air coming out of the end of the hot side turbine.
did i blow my oil seals??
but before i put the turbo back i blew the one side of oil lines and plugged the other side and i hear air coming out of the end of the hot side turbine.
did i blow my oil seals??
my intake piping? dude i run WI i just ran straight to the Throttle boddy and for the feed and return i ran teflon inner stainless outer lines from my local hydraulics shop. probly but i would try it all the same either it leaks or it doesnt the compressor is sealed via a oring and the hotside is compression sealed. Alil silicone can help alot.
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![magna](https://www.miataturbo.net/images/smilies/magna.gif)
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
Thread
Thread Starter
Forum
Replies
Last Post