My Car Is Bling-Blangin'
#1
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,607
Total Cats: 4,102
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Bling-Blangin' Rich that is!
Just got off the dyno. Got it back up to 172hp/146tq at 10:1
I need to test my FMU to see why it's so rich. I couldn't lean it out no matter what I did! I had my MBC maxed so I couldn't add more power to lean it out. I'm pretty sure it's the FMU and I'm sure if I can lean it out it will make lots more power. But driving home it seems to pull WAY harder than it ever did and the curve itself looks a lot nicer. I'll have it posted later on, no scanner right now.
Just got off the dyno. Got it back up to 172hp/146tq at 10:1
![eek5](https://www.miataturbo.net/images/smilies/eek5.gif)
I need to test my FMU to see why it's so rich. I couldn't lean it out no matter what I did! I had my MBC maxed so I couldn't add more power to lean it out. I'm pretty sure it's the FMU and I'm sure if I can lean it out it will make lots more power. But driving home it seems to pull WAY harder than it ever did and the curve itself looks a lot nicer. I'll have it posted later on, no scanner right now.
#4
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,607
Total Cats: 4,102
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![](http://www.rev2red.com/images/cars/newdyno.jpg)
It's nearly identical to my last dyno, the only difference is that I lost some low end torque, but the horsepower stills higher longer. And as you can see I need to work the a/f, once I get that figured out I'm sure I'll be making more power than that.
#7
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,607
Total Cats: 4,102
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm pretty sure I need a 6:1 ratio not a 8:1 ratio that I put in.
The damn thing still pull like bloody hell up 125mph. Pulls a lot harder than it did before. I should have video form a car behind me on the track that caught it blowing flames out the back during a shift (heh heh).
The damn thing still pull like bloody hell up 125mph. Pulls a lot harder than it did before. I should have video form a car behind me on the track that caught it blowing flames out the back during a shift (heh heh).
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
youll be pleasently surprised if you lean it out more...my car was bucking and coughing at anything under 10:1afr,,, i picked up between 7-10 Rwhp going from 11:1 to 12:1 so you can see what sort of gains youll get.....have a look at my nice flat E manage curve!!!
http://miata.cardomain.com/ride/264041/6
BTW ive noticed that many FI'd cars seem to have a HP dip at about 6000-6100rpm...must be a quirck of the engine.....
http://miata.cardomain.com/ride/264041/6
BTW ive noticed that many FI'd cars seem to have a HP dip at about 6000-6100rpm...must be a quirck of the engine.....
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Are you referring to forced-induction Miatas? I've never really noticed that. In fact, I just went looking at a bunch of Miata dyno charts and didn't really see that phenomenon on any of them. It sounds more like maybe a slight misfire or related issue. If the spark's gonna blow out, it'd be more likely at higher RPMs, I would think. Or maybe you've got too much timing pulled.