Hi.

Can people please tell me what their req_fuel is? Preferably if you have a 1.8turbo with 420cc injectors.
My 1.8l turbo was running fine with an ms2. It then threw a rod so I swapped it with another 1.8 of the same year and it's having trouble starting, at any temperature. When it starts it runs perfectly. So I'm trying to tune the start up procedures and I want to make sure I have the right req_fuel first. I know that tunerstudio has a calculator.
On the ms2, Dimitris has put 240 for the injector flow. Should this not be 420 for my injectors?(yellow rx8 injectors)
My ms2 was built by Dimitris and I know he knows his stuff.

If you could, post any shots of your cranking pulse % too? Thanks.

 

Sounds like a typo, I typed in 240 instead of 420 in the basemap. Curious as to how it been starting all along though!

 

Ah I thought that was wrong! I'll change that later and see what happens. I'll have to remap the ve tables now too. The joys

 

This also explains why I had to remove so much from the ve table in the first place