Miata Turbo Parts you would like to see offered
#1
Former Vendor
Thread Starter
iTrader: (8)
Join Date: Mar 2005
Location: Broken Arrow,Ok
Posts: 1,185
Total Cats: 57
Miata Turbo Parts you would like to see offered
Just thought I would get a concensus (sp?) of some things that you as the community might like to see offered for the turbo miata, or even just the miata in general. For instance, a few nights ago I had a thought to make a quality oil drain, and possibly oil feed lines specific to the miata. So lets here what you want offered.
-Michael-
-Michael-
#2
intercoolers you dont have to sell yourself to afford
and a megasquirt ems that is as close to plug and play as possible
and a two foot high double decker spoiler
edit: i think just about every person on here would really like to see some quality cheap flanges for just about anything turbo related and miata related
and a megasquirt ems that is as close to plug and play as possible
and a two foot high double decker spoiler
edit: i think just about every person on here would really like to see some quality cheap flanges for just about anything turbo related and miata related
#8
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
Kingofl337 offers a plug and pluy Megasquirt for $550.
Stripes intercooler kit is already available. It can easily be adapted for various applications.
http://www.mx5projects.com/
#10
- I wish somebody offered a service in which you told them your setup (including fuel management, etc) and you received all the appropriate fittings, bolts, random hoses, and sealants/teflon. I would paid a premium for that service
- around-the-radiator **** equivalent (cheap, get-the-job-done quality) intercooler setup, left so that the buyer would fabricate the hotside end to meet the turbo (generalize the "kit")
[EDIT] What I'm trying to say is that I want to buy Stripes intercooler kit, I can take off the 90* from the turbo outlet and adapt something of my own to fit. [/EDIT] <-- not quite
- cheaper, big cat-back
EDIT: More laziness would be great!
- around-the-radiator **** equivalent (cheap, get-the-job-done quality) intercooler setup, left so that the buyer would fabricate the hotside end to meet the turbo (generalize the "kit")
[EDIT] What I'm trying to say is that I want to buy Stripes intercooler kit, I can take off the 90* from the turbo outlet and adapt something of my own to fit. [/EDIT] <-- not quite
- cheaper, big cat-back
EDIT: More laziness would be great!
Last edited by Atlanta93LE; 12-14-2006 at 10:19 AM.
#15
Former Vendor
Thread Starter
iTrader: (8)
Join Date: Mar 2005
Location: Broken Arrow,Ok
Posts: 1,185
Total Cats: 57
Thus far, this is what I see,
1. Oil line/ possibly water line kit.
2. Intercooler/ IC piping with quality mounting hardware.
3. Plug and Play Piggyback ECU
4. Mitsubishi Turbo Manifold
5. Proper fittings, lines, and gasket materials for the misc. things.
Keep them coming! If enough are interested the oil line and water line kits may be very possible. What do you think a reasonable price would be for each? I'll have to do a bit of research, but I think I could offer something like that pretty reasonably, at least for the T3's.
-Michael-
1. Oil line/ possibly water line kit.
2. Intercooler/ IC piping with quality mounting hardware.
3. Plug and Play Piggyback ECU
4. Mitsubishi Turbo Manifold
5. Proper fittings, lines, and gasket materials for the misc. things.
Keep them coming! If enough are interested the oil line and water line kits may be very possible. What do you think a reasonable price would be for each? I'll have to do a bit of research, but I think I could offer something like that pretty reasonably, at least for the T3's.
-Michael-
#17
I think the Greddy EMU with well fleshed out maps for various setups would work for most people for a PNP ECU. Or the same with a parallel installed MS.
Oil source/return line with fittings with specific line length for the Miata like this:
http://www.blaastperformance.com/index.php?p=oil-kit
but maybe lowball at $75 if it's doable.
Frank
Oil source/return line with fittings with specific line length for the Miata like this:
http://www.blaastperformance.com/index.php?p=oil-kit
but maybe lowball at $75 if it's doable.
Frank
#20
I just ordered the oil lines from JGS, shipped was less than 90.00
It's not the oil lines that are hard, they can be made cheap. It's that damn 1/8 BSP adapter, The place I used to buy from, gets over 30 bucks shipped for it, (it was only 18 shipped last time I bought from them) so I just went to JGS and ordered everything...
So please add that 1/8 BSP adapter to your list.
link:
http://tunertoys.zoovy.com/product/OTODK
P.S. Not every state has a hydraulic fitting/shop that sells to the general public...F'ers...
It's not the oil lines that are hard, they can be made cheap. It's that damn 1/8 BSP adapter, The place I used to buy from, gets over 30 bucks shipped for it, (it was only 18 shipped last time I bought from them) so I just went to JGS and ordered everything...
So please add that 1/8 BSP adapter to your list.
link:
http://tunertoys.zoovy.com/product/OTODK
P.S. Not every state has a hydraulic fitting/shop that sells to the general public...F'ers...