Looking for feedback on my build list
#1
Looking for feedback on my build list
Hey all,
Been wanting to turbocharge my Miata for awhile now. Been doing a lot of reading and research and I am just about ready to make the jump. My car is a 97 with a fresh Torsen rear end. Engine runs smoothly, but I plan on doing a compression test before I buy any of my turbo stuff, just to be sure the engine is healthy enough.
Here is my build list so far:
Goal is 240 WHP. I plan on taking the car to my local tuner who has experience tuning turbo Miatas. Anything you guys would change here? Any major stuff I am missing? I am sure there is. Thank you for taking the time to look it over!
Been wanting to turbocharge my Miata for awhile now. Been doing a lot of reading and research and I am just about ready to make the jump. My car is a 97 with a fresh Torsen rear end. Engine runs smoothly, but I plan on doing a compression test before I buy any of my turbo stuff, just to be sure the engine is healthy enough.
Here is my build list so far:
Turbo: GT2560R https://www.atpturbo.com/mm5/merchan...Category_Code=
$860
Manifold and downpipe: Kraken kit https://kraken-mx5.eu/product/t25-tu...npipe-builder/
$784 (shipped)
Injectors: Flowforce 640cc: https://goflowforce.com/products/640cc-injector-kit
$320
Clutch: FM Happy Meal Kit (already owned)
Engine Management: MS PNP3 https://supermiata.com/megasquirt-miata-PNP3.aspx
$1200
Wideband: AEM https://www.amazon.com/gp/product/B0...daba752e5cfe77
$160
Intercooler and piping:
$300?
$860
Manifold and downpipe: Kraken kit https://kraken-mx5.eu/product/t25-tu...npipe-builder/
$784 (shipped)
Injectors: Flowforce 640cc: https://goflowforce.com/products/640cc-injector-kit
$320
Clutch: FM Happy Meal Kit (already owned)
Engine Management: MS PNP3 https://supermiata.com/megasquirt-miata-PNP3.aspx
$1200
Wideband: AEM https://www.amazon.com/gp/product/B0...daba752e5cfe77
$160
Intercooler and piping:
$300?
#3
You're missing some of stuff like water and oil supply/drain lines.
A GT2560 is a good choice, but a lot of people recommend against buying a brand new one. The money spent just isn't worth the 20-year-old technology. For a few hundred more you can have the holy grail of Miata turbos, the EFR. Or go with a used sr20 turbo for a lot less.
Everything else you've listed is good stuff, though.
A GT2560 is a good choice, but a lot of people recommend against buying a brand new one. The money spent just isn't worth the 20-year-old technology. For a few hundred more you can have the holy grail of Miata turbos, the EFR. Or go with a used sr20 turbo for a lot less.
Everything else you've listed is good stuff, though.
#4
+1 to what Artifex mentioned. If you're gonna go buy brand new, I'd spend another ~$400 and get a efr6258. I also prefer the standard v-band on the efr. Otherwise, I'd look for a used 2560r that's like half the price of new. Unless you a building your own exhaust, may i also recommend Kraken's complete kit? You'd be hard pressed to build the rest of the exhaust for the same price as just getting his full kit.
#5
Awesome feedback guys, much appreciated! Where do you recommend buying a used 2560R? None on my local classifieds that I can find. Is there a website that rebuilds and sells used ones?
Also I was going to go custom fab with the exhaust setup. But maybe you're right about the full kraken kit....
Quick question, for this turbo setup, would it be worth going up to a 3" downpipe setup? I heard if you call in they can do a full 3" setup.
Finally, the kraken kit says it comes with water/oil lines and fittings for a limited time. I don't see any pictures or descriptions, but thats pretty cool of them, assuming it's decent quality stuff.
Also I was going to go custom fab with the exhaust setup. But maybe you're right about the full kraken kit....
Quick question, for this turbo setup, would it be worth going up to a 3" downpipe setup? I heard if you call in they can do a full 3" setup.
Finally, the kraken kit says it comes with water/oil lines and fittings for a limited time. I don't see any pictures or descriptions, but thats pretty cool of them, assuming it's decent quality stuff.
#7
Checked Kraken Facebook. Says prices are about to go up, but that he's having a sale before that happens. Looks like I picked a good time to build!
Also I looked into the EFR. Might actually go that route. Looks like there's a sale on that turbo right now: https://www.full-race.com/store/borg...fr-6258-turbo/
Question on that turbo. There are a bunch of different ways to spec it out on the site. What configuration would you guys recommend given my build list? (This is assuming I switch over to the EFR kraken kit of course)
Also I looked into the EFR. Might actually go that route. Looks like there's a sale on that turbo right now: https://www.full-race.com/store/borg...fr-6258-turbo/
Question on that turbo. There are a bunch of different ways to spec it out on the site. What configuration would you guys recommend given my build list? (This is assuming I switch over to the EFR kraken kit of course)
#11
Or for a few hundred more you can get a complete MKTurbo setup for $4040 shipped in the continental US. Includes a full 3" exhaust with the correct size Magnaflow exhaust, and all the bits and pieces you missed. Proudly hand built in the US and currently has about a week or so lead time depending on what year you have.
#15
In regards to the GT2560R, this is where I ordered mine form. https://www.ebay.com/itm/OEM-Nissan-...frcectupt=true
Looks to be about $100 less than the site you posted, plus free shipping. Comes with a cool T-shirt too
Looks to be about $100 less than the site you posted, plus free shipping. Comes with a cool T-shirt too
Thread
Thread Starter
Forum
Replies
Last Post