Just got a turbo kit & I have a few questions!
#21
Junior Member
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: So Cal
Posts: 322
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Holy crap you guys are awesome...thanks for the information. Looks like I will be going megasquirt in a month or so then. Thanks for all your help once again and I will keep this thread updated. Thanks guys!
#23
Junior Member
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: So Cal
Posts: 322
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Can anyone direct me to a link showing how to run my Charge piping to my FMIC. The intercooler is sort of small, but it is a longer version with the inlet/outlet horizontally parallel with each other. I am @ work or else I would post up pics and measurements. It will be going on a NB, all I can find are links for NA's or NB routing throught the top with the radiator pushed back. Thanks
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
not sure i understand, but i guess just check out these pics
also, are you doing your own IC route or did your Kit come with some?
http://i134.photobucket.com/albums/q...Picture071.jpg
http://i134.photobucket.com/albums/q...Picture070.jpg
http://i134.photobucket.com/albums/q...Picture068.jpg
http://i134.photobucket.com/albums/q...Picture067.jpg
see if that helps you, this is a DIY set up
the piping can differ in a few ways though, so i cant help you there without seeing what you have...
GL
also, are you doing your own IC route or did your Kit come with some?
http://i134.photobucket.com/albums/q...Picture071.jpg
http://i134.photobucket.com/albums/q...Picture070.jpg
http://i134.photobucket.com/albums/q...Picture068.jpg
http://i134.photobucket.com/albums/q...Picture067.jpg
see if that helps you, this is a DIY set up
the piping can differ in a few ways though, so i cant help you there without seeing what you have...
GL
#25
Junior Member
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: So Cal
Posts: 322
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks, yah I will try to get some pictures up tonight. It came with a couple of bends, but the previous owner sold the BOV with a piece he cut from the set up. I know its hard to explain so I will try to post up pictures tonight. But where would I get those brackets, is it all just custom fabircation using pieces from a metal supplier? Also, do I just have to remove the front bumper to access that area or is it much more. Thanks for the pictures, and that looks to be my IC type.
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
its an ebay intercooler and "cuztom bracketz" yo, haha
well, the brackets were actually kinda easy to make, just bought some 1" wide aluminum from home depot and then just cut to length and bend to desired angle, do not over bend it cause aluminum does not like to be corrected...the holes where the brackets bolt up to the car were already there...you'll see once you take the bumper off, its really easy, just use common sense, the bottom ones just get the idea from this pic. i also used some rubber spacers to help longevity...
http://i134.photobucket.com/albums/q...Picture071.jpg
the car in pictures has both AC and PS so you should be OK if you have those as well
and please list your location in your profile...
well, the brackets were actually kinda easy to make, just bought some 1" wide aluminum from home depot and then just cut to length and bend to desired angle, do not over bend it cause aluminum does not like to be corrected...the holes where the brackets bolt up to the car were already there...you'll see once you take the bumper off, its really easy, just use common sense, the bottom ones just get the idea from this pic. i also used some rubber spacers to help longevity...
http://i134.photobucket.com/albums/q...Picture071.jpg
the car in pictures has both AC and PS so you should be OK if you have those as well
and please list your location in your profile...
#31
Junior Member
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: So Cal
Posts: 322
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Its only because I want this thing to just get up and run...and compared to what I have heard...
wideband 180
MS 340
Cas 100
620 vs. the 415 for a Voodoo box seems cheap...someone show me where I am going wrong, I believe I am way too new to my miata's ECU/FMU.
wideband 180
MS 340
Cas 100
620 vs. the 415 for a Voodoo box seems cheap...someone show me where I am going wrong, I believe I am way too new to my miata's ECU/FMU.
#35
Junior Member
iTrader: (1)
Join Date: Oct 2004
Location: Haarlem ,the Netherlands
Posts: 453
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
With the larger injector you need a wideband too...
Listen to those guys here... They really know what they are doing.
After 6 psi you want 8 -- 10 --12 psi ... So do it right... 1st time..
Listen to those guys here... They really know what they are doing.
After 6 psi you want 8 -- 10 --12 psi ... So do it right... 1st time..
#37
Junior Member
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: So Cal
Posts: 322
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks guys,
For the oil tee is the BSP side male and the other two female? Please advise asap, I cannot find a solid answer and I am going to a pipe store today to create the tee...thanks
For the oil tee is the BSP side male and the other two female? Please advise asap, I cannot find a solid answer and I am going to a pipe store today to create the tee...thanks
#39
Junior Member
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: So Cal
Posts: 322
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![](https://www.miataturbo.net/images/smilies/confused.gif)
#40
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You just have to use your brain when it comes to things like that, there are always people giving out info that might pertain to them only. In my case, my stock BSP OPS went in the trash.