Jerking Problems
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Go ahead and buy a set of injectors (list above) and watch the magic.
![](https://www.miataturbo.net/images/smilies/smile.gif)
With the ECU your stock fuel pump will be adequate for nearly any fueling needs. However, if you are trying to force all that fuel through those tiny *** stock injectors, you are going to run into some problems.
Almost sounds like it is happening now!
![](https://www.miataturbo.net/images/smilies/smile.gif)
With the ECU your stock fuel pump will be adequate for nearly any fueling needs. However, if you are trying to force all that fuel through those tiny *** stock injectors, you are going to run into some problems.
Almost sounds like it is happening now!
#22
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
hey bro samnavy... u have been of great help... sorry if i sound a bit noob...
Thanks for all the advice currently... i am currently at the shop right now... will update u guys on the situation soon... hopefully it will be ok.... if not i will have to source for those injectors soon....
Also will post more pictures of the car and the setup when i have the time...
Thanks for all the advice currently... i am currently at the shop right now... will update u guys on the situation soon... hopefully it will be ok.... if not i will have to source for those injectors soon....
Also will post more pictures of the car and the setup when i have the time...
#23
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
hey guys!! got the problem solved yesterday after a fine tune and tuning the boost down to around 11psi and some fine tuning with the electronic boost controller... Apparantly the engine would knock at around 12.5psi...
After all.. the engine is fully stock for now... would consider doing forged internals when the time is right. Hehe, for now the miata is fun to drive... will try to post more pictures soon !
After all.. the engine is fully stock for now... would consider doing forged internals when the time is right. Hehe, for now the miata is fun to drive... will try to post more pictures soon !
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am a noob as well CM, and I may be overstepping my knowledge range, but in my estimation, turning the boost down to 11 is a crutch to hide the fact that you are not getting enough fuel to run any higher. Run the injectors that are recommended above and you can turn your boost back up.
More boost = more need for fuel.
High boost without enough fuel = knocking.
Forged internals are nice, but at your power levels are not necessary.
More boost = more need for fuel.
High boost without enough fuel = knocking.
Forged internals are nice, but at your power levels are not necessary.
#28
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hi again peeps, some updates on the miata!
Having settled the problem the last time around, went around organizing some drag matchups and the results were very poor.
Decided to bring the miata down to another shop to get it re-tuned.. Before we did tuned the miata again... the following was done:
- Replaced the 1 external injector with a PE 700cc one
- Replaced all the boost hoses to new samco ones
- Brand new shinning intercooler
- Some servicing was done
- Then the final retune.... the result was this....
![Name: newTorque-1.jpg
Views: 129
Size: 49.2 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/213411d1501267182-jerking-problems-newtorque-1.jpg)
![Name: newHP-1.jpg
Views: 147
Size: 51.7 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/213412d1501267182-jerking-problems-newhp-1.jpg)
Now, the ride feels much more powerful... very very satisfied with the retune.
i would like to thank all the helpful peeps in this forum and also the shop...
By the way mod lists includes:
Destek Unichip
TD04L from 05 WRX
Walbro 255HP Fuel Pump
Sard Fuel Pressure Regulator
Apexi AVCR Electronic Boost Controller
HKS Mushroom reloaded air filter
Brand New Mines Bar and Plate intercooler
Top Mount Custom Manifold
2.5 inch Charge pipes Hot and Cold
2.5 inch Downpipe and straight through exhaust
Samco Hoses
Greddy Type Rs BOV
Having settled the problem the last time around, went around organizing some drag matchups and the results were very poor.
Decided to bring the miata down to another shop to get it re-tuned.. Before we did tuned the miata again... the following was done:
- Replaced the 1 external injector with a PE 700cc one
- Replaced all the boost hoses to new samco ones
- Brand new shinning intercooler
- Some servicing was done
- Then the final retune.... the result was this....
![Name: newTorque-1.jpg
Views: 129
Size: 49.2 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/213411d1501267182-jerking-problems-newtorque-1.jpg)
![Name: newHP-1.jpg
Views: 147
Size: 51.7 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/213412d1501267182-jerking-problems-newhp-1.jpg)
Now, the ride feels much more powerful... very very satisfied with the retune.
i would like to thank all the helpful peeps in this forum and also the shop...
By the way mod lists includes:
Destek Unichip
TD04L from 05 WRX
Walbro 255HP Fuel Pump
Sard Fuel Pressure Regulator
Apexi AVCR Electronic Boost Controller
HKS Mushroom reloaded air filter
Brand New Mines Bar and Plate intercooler
Top Mount Custom Manifold
2.5 inch Charge pipes Hot and Cold
2.5 inch Downpipe and straight through exhaust
Samco Hoses
Greddy Type Rs BOV
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM