I now need some serious help from the turbo masters
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
OK folks
So as stated above my spool was ****.
I am now spooling just as late and making 280whp and 273ftlbs on a mustang at 15psi.
Dont get me wrong, the thing is bad ***, just not when I need it to be.
Anyway, I just found out today that my turbo will be getting a new stage 1 turbine wheel with a .48AR housing. Gspec and Turbonetics came together and agreed to fix it for me. Thanks greg at Gspec![](https://www.miataturbo.net/images/smilies/smile.gif)
So I wanted some input from you folks..
I still def want the same numbers, they are great, and I do believe the smaller wheel is going to make them happen alot quicker. Hopefully 1200rpm quicker.
I just wanted to know if you think I will have to jack up my boost a **** ton to get the same numbers with the smaller turbine wheel...
Thanks everyone. I hope to put up a solid dyno here for you folks soon so I can be added to the spool info ect..
So as stated above my spool was ****.
I am now spooling just as late and making 280whp and 273ftlbs on a mustang at 15psi.
Dont get me wrong, the thing is bad ***, just not when I need it to be.
Anyway, I just found out today that my turbo will be getting a new stage 1 turbine wheel with a .48AR housing. Gspec and Turbonetics came together and agreed to fix it for me. Thanks greg at Gspec
![](https://www.miataturbo.net/images/smilies/smile.gif)
So I wanted some input from you folks..
I still def want the same numbers, they are great, and I do believe the smaller wheel is going to make them happen alot quicker. Hopefully 1200rpm quicker.
I just wanted to know if you think I will have to jack up my boost a **** ton to get the same numbers with the smaller turbine wheel...
Thanks everyone. I hope to put up a solid dyno here for you folks soon so I can be added to the spool info ect..
#27
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
After speaking with Turbonetics and running this by their engineers they decided their T3 super 60 with a stage three turbine wheel and a .48 Turbine housing.
I installed this and running 17psi instead of almost 18, I had 299 rwhp and 270 ftlbs.
great numbers. The problem is that the dyno plot is identical to the last one. They both suck.
So now, the tuner,and my machinist think that the cams are off because my head has been decked several times. They felt if I buy adjustable cam gears we can put the cams where they need to be and reach this peak boost level way before it is now..
Anyone have some input??
I installed this and running 17psi instead of almost 18, I had 299 rwhp and 270 ftlbs.
great numbers. The problem is that the dyno plot is identical to the last one. They both suck.
So now, the tuner,and my machinist think that the cams are off because my head has been decked several times. They felt if I buy adjustable cam gears we can put the cams where they need to be and reach this peak boost level way before it is now..
Anyone have some input??
#28
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Your initial instinct in post #1 was correct. The T3S60 was exactly the turbo you should have gotten from step one. It would have gotten you exactly what you wanted. Don't listen to Hustler, it took him 4 years and everyone elses opinions, the same people that recommended you the T3S60, to finally put his setup together.
#29
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
TURNS, dude, it would be awesome if you would post your dyno plots as you've changed setups along the way... it would benefit the forum a lot, and long after you may be gone.
Confirm you are currently running adjustable cam-gears? Which ones did you get, what are the settings, and can we see the before/after dyno plots?
Confirm you are currently running adjustable cam-gears? Which ones did you get, what are the settings, and can we see the before/after dyno plots?
#30
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
No problem. I can do that. i just have to get all of the plots together.
i will get it all together amd make a post with all the info i can give you guys.
Right now i just have scans of the plots and they may look really shitty here. I will try and get the files so I can post them here clearly.
So the t3s60 with the stage 1 turbine wheel and a.48 A/R BB turbo will have me at the smae power #s, just a **** ton earlier???
If so, tis car will be more of an animal..
Thanks everyone..
i will get it all together amd make a post with all the info i can give you guys.
Right now i just have scans of the plots and they may look really shitty here. I will try and get the files so I can post them here clearly.
So the t3s60 with the stage 1 turbine wheel and a.48 A/R BB turbo will have me at the smae power #s, just a **** ton earlier???
If so, tis car will be more of an animal..
Thanks everyone..
#33
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just look at scott's plots man. It comes on like a freight train and stays. And he is only running like 12-13psi. On your built motor you can max it out. I think it can run something like 22psi maybe more before being inefficient. Should get you your target easily.
Thats probably why they are actually going to fix it..
I am excited to see the change..
#37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
They also list an internally gated T3 inlet/ Ford outlet housing here, but I didn't see it on the site. I'm sure they would sell you one if you called.
Garrett GT2871R turbo with GT28R style Compressor Housing NO ACTUATOR: atpturbo.com
Garrett GT2871R turbo with GT28R style Compressor Housing NO ACTUATOR: atpturbo.com
#39
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Boundary Engineering check out this page for various plots with only changing the intake cam gear on a turbocharged miata. It really modulates power.
#40
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Boundary Engineering check out this page for various plots with only changing the intake cam gear on a turbocharged miata. It really modulates power.