Help with 1997 1.8L turbo build?!?
#1
Help with 1997 1.8L turbo build?!?
I know everyone hates on eBay turbo kits and i understand why but I’m definitely on a budget but would be willing to save more if it was definitely worth it. Can anyone give me some steps to bring to take to turbo a stock 1997 mx5 Miata. If i could get to 200+ hp I’d be super happy with that. Would a cheap kit like this be any good? And yes i have done my research and I’ve seen where these can be ran reliably especially on low boost. https://rover.ebay.com/rover/0/0/0?m...2F263885536187
#4
I know everyone hates on eBay turbo kits and i understand why but I’m definitely on a budget but would be willing to save more if it was definitely worth it. Can anyone give me some steps to bring to take to turbo a stock 1997 mx5 Miata. If i could get to 200+ hp I’d be super happy with that. Would a cheap kit like this be any good? And yes i have done my research and I’ve seen where these can be ran reliably especially on low boost. https://rover.ebay.com/rover/0/0/0?m...2F263885536187
#5
Must have for super budget:
1. ebay cast iron manifold: 100$~
2. wideband + ecu: 800-1000$
3. TD04 turbo 200$~
4. IC + piping 200$~
5. custom down pipe 400$~
6. air filter, turbo oil and water lines, bov 200$~
7. installation + oil pan drill for turbo oil return ???$
8. tune (!!)
Under 200whp you don't need a clutch and not even injectors - you can see how dangerous you run them via the "duty cycle" on the ecu (85% max is default normal)
"stage 2" must have:
- injectors
- clutch
- exhaust - 2.5"-3"
1. ebay cast iron manifold: 100$~
2. wideband + ecu: 800-1000$
3. TD04 turbo 200$~
4. IC + piping 200$~
5. custom down pipe 400$~
6. air filter, turbo oil and water lines, bov 200$~
7. installation + oil pan drill for turbo oil return ???$
8. tune (!!)
Under 200whp you don't need a clutch and not even injectors - you can see how dangerous you run them via the "duty cycle" on the ecu (85% max is default normal)
"stage 2" must have:
- injectors
- clutch
- exhaust - 2.5"-3"
#18
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 21,029
Total Cats: 3,123
Above 85% duty cycle is effectively always open so it isn't adding more fuel at that point, just getting leaner. They are EV1 injectors, after all, and have very slow opening and closing times. You would need to significantly increase the fuel pressure on an NA from its 43psi standard to flow enough for much of any boost and wouldn't have headroom for fluctuations in requirements due to cooler weather or a boost spike.
Please don't recommend foolish actions to noobs here.
EDIT: Finally made it to a computer. According to the fuel injection calculator the NA8 265cc injector is good for 171 crank HP at 85% DC, or about 150whp. That's with a boost referenced fuel rail starting at 43.5psi. 150 is not 200 unless you are using the European style of horsepower measurement where everything is inflated by huge %%%.
Last edited by sixshooter; 01-16-2019 at 08:19 AM.