GT2860RS making 14 PSI from internal wastegate?
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I also posted this over @ miata, so sorry if you saw it there too...
Hey all,
Been working at tuning my setup for the last week or so.
The subject is a 1991 1.6 Miata w/ Begi 3 (2860RS) and running on a Link.
I have been making high boost just running from the internal wastegate, around 13-14 PSI.
I have adjusted the actuator rod as far as I can (lengthend the rod) and am still running around 14, thus rendering my boost control soleniod useless as I would like to be running 12 PSI due to the engine being stock.
Does it seem like the wastegate is faulty? I can't imagine that the setting should be that high, but I don't have much experience here.
Any help is appreciated.
Hey all,
Been working at tuning my setup for the last week or so.
The subject is a 1991 1.6 Miata w/ Begi 3 (2860RS) and running on a Link.
I have been making high boost just running from the internal wastegate, around 13-14 PSI.
I have adjusted the actuator rod as far as I can (lengthend the rod) and am still running around 14, thus rendering my boost control soleniod useless as I would like to be running 12 PSI due to the engine being stock.
Does it seem like the wastegate is faulty? I can't imagine that the setting should be that high, but I don't have much experience here.
Any help is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM