GT2560R Compressor Outlet - 180° "Reclock" Adapter?
#1
Junior Member
Thread Starter
iTrader: (42)
Join Date: Dec 2010
Location: Meridian, ID
Posts: 278
Total Cats: 21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Does anyone sell a 180° "reclock" adapter for the GT2560R's compressor outlet? I want to mount a 300ZX outlet tube so that it faces forward. I've searched for hours and have come up empty. Any assistance would be greatly appreciated!
![](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/59776d1352856699-gt2560r-compressor-outlet-180%B0-reclock-adapter-wp_000456_low.jpg)
#2
Cpt. Slow
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
In all my searches with a similar SR20 turbo, I've never seen anything. I might suggest clocking the compressor housing to suit your application.
I would think one of the three positions could be utilized in some way. Where does your manifold mount the turbo?
I would think one of the three positions could be utilized in some way. Where does your manifold mount the turbo?
#5
Elite Member
iTrader: (2)
Join Date: May 2007
Location: Cromwell, Connecticut
Posts: 2,606
Total Cats: 16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
not worth the money but...
STANCE - Turbo Clocking Adapter for T25 - Enjuku Racing Parts, LLC
that is to make a s15 t28 have the same orientation as a s13 t25... but it might help you.
Just clock the turbo and make IC pipes to fit IMO.
STANCE - Turbo Clocking Adapter for T25 - Enjuku Racing Parts, LLC
that is to make a s15 t28 have the same orientation as a s13 t25... but it might help you.
Just clock the turbo and make IC pipes to fit IMO.
#7
Junior Member
Thread Starter
iTrader: (42)
Join Date: Dec 2010
Location: Meridian, ID
Posts: 278
Total Cats: 21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks for all of the suggestions. This is going in a Locost, so space in the engine bay is at a premium. No space to route the IC piping to the side and I need clearance underneath for the steering shaft. Machining off the triangular flange might be the way to go. Or just have an adapter made up out of some 1/2" plate....
![](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/59805d1352871783-gt2560r-compressor-outlet-180%B0-reclock-adapter-reclock-adapter.jpg)
#12
Junior Member
Thread Starter
iTrader: (42)
Join Date: Dec 2010
Location: Meridian, ID
Posts: 278
Total Cats: 21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am having a custom machined adapter priced up. Attached is a drawing in case someone ever needs a similar part made. The adapter is designed to bolt to the compressor outlet flange with three M6-1.0 x 20mm flat head socket screws. The two bolt patterns are offset 47.5° instread of 60.0° to get the outlet tube to point straight ahead instead of 12.5° to the outside of the car.
![](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/60055d1353097790-gt2560r-compressor-outlet-180%B0-reclock-adapter-sk-001-sheet1.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM