Gauge Install
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am looking to install my boost gauge and lc1 gauge in a week.
no turbo yet,
but due to work and school i only have the weekends to work and i want to have the gauges in the car before the weekend that i will be install turbo.
i am looking to do a vent mount since i dont want the gauges being more visible.
i have seen https://www.miataturbo.net/forum/sho...ht=gauge+mount,
and the how to remove the vent, but that was for the na. is it the same method for the NB? just pull on the vent?
with the vent mount, how do you pull the wires?
i have also been thinking about where to pull the power. from my readings, it looks like i can by a "add a fuse" and wire it that way, or i can wire it in to gauge cluster, or cigarrete lighter.
if i would wire it to the ciggarette lighter, would the guages turn off when the car is off?
if i go the cluster wiring route, does anyone know which wire i would use for the 12v current?
i am currently looking at mounting the boost gauge in the center vent, and i am thinking about the lc1, do any of you guys have gauges mounting on top of the steering column, behind the steering wheel? seems like this would be good in a single pod in terms of looks and functionality since it would be easily visible.
thanks alot guys again! i appreciate all the help!
![](https://www.miataturbo.net/images/smilies/smile.gif)
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)
i am looking to do a vent mount since i dont want the gauges being more visible.
i have seen https://www.miataturbo.net/forum/sho...ht=gauge+mount,
and the how to remove the vent, but that was for the na. is it the same method for the NB? just pull on the vent?
with the vent mount, how do you pull the wires?
i have also been thinking about where to pull the power. from my readings, it looks like i can by a "add a fuse" and wire it that way, or i can wire it in to gauge cluster, or cigarrete lighter.
if i would wire it to the ciggarette lighter, would the guages turn off when the car is off?
if i go the cluster wiring route, does anyone know which wire i would use for the 12v current?
i am currently looking at mounting the boost gauge in the center vent, and i am thinking about the lc1, do any of you guys have gauges mounting on top of the steering column, behind the steering wheel? seems like this would be good in a single pod in terms of looks and functionality since it would be easily visible.
thanks alot guys again! i appreciate all the help!
#6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thats what I did. I wired my gauges with an add a link into where the power window fuse would be since I dont have them. I used to have them wired into the cluster and after a while it killed the relay. As for on top of the steering column, thats where I have my WB. I put it off center to the right so I could still see the full sweep of the tack. It fist perfectly.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#8
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just look into the fuse box and check all the empty spots to see if they power on with the key. If you find one then your golden.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#9
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![Bang](https://www.miataturbo.net/images/smilies/bang.gif)
Thats what I did. I wired my gauges with an add a link into where the power window fuse would be since I dont have them. I used to have them wired into the cluster and after a while it killed the relay. As for on top of the steering column, thats where I have my WB. I put it off center to the right so I could still see the full sweep of the tack. It fist perfectly.
the only other thing i am thinkng about... once i yank the vent out. how do you get the wiring to come out to the fuse box area for the electrical and to the hood for the boost pressure line. can i just work the lines until they start to show themselves somewhere lol?
thanks alot again guys for all the help.
btw, levnubhi, do u have a pod for your steering coloumn wideband? i am trying to find out if should get a pod, or mount it without a pod.
thanks again guys!
#11
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
just looking at the vent seems like its too big to come out throught the opening lol.
one more question, do u guys just set the guage in their? no mounting it in their it just kinda sits doesnt come out?
also, its a mechanichal guage, but it has the bulb in it.. (guage is a autometer ultralite), what do you guys do to keep the heat from roasting the back of the guage? or nothing?;
#12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You attach one to the other, to make a vshape, you shove the base of the v in and one side into the vent, then you fiddle until the other side of the v comes out.
Attach the sides of the v to make an O and pull, cut the zipties once they are out to reinstall.
Much easier then screwing around with strings.
#16
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
well i got the vent out... took some time but now i have to find a way to run the power and pressure lines.
zabac, when you say, "you can route some rope through the vent and then back out and pull on the rope, makes it a lot easier"
so where would u put the rope in and where would all the wires come out from? i guess i am trying to ask if you kind of do this backwords and pull the wires out through the vent hole? i am not too sure which specific location i should have all the wires come out from the dash area behind the gauges, too. i am assuming i need the boost line to go to the drivers side under dash area to wire through into the hood. where would the wires come out from?
thanks for the heads up. where do you guys reccomend i ground? can i just find metal under carpet kind of stuff, find a screw or bolt, take off the paint, and use that?
any other good grounding places?
sorry for all the noob questions guys. i havnt really done electrical stuff except amps and subs but that was 5 years ago lol.
anyway, again thanks for all the help!
zabac, when you say, "you can route some rope through the vent and then back out and pull on the rope, makes it a lot easier"
so where would u put the rope in and where would all the wires come out from? i guess i am trying to ask if you kind of do this backwords and pull the wires out through the vent hole? i am not too sure which specific location i should have all the wires come out from the dash area behind the gauges, too. i am assuming i need the boost line to go to the drivers side under dash area to wire through into the hood. where would the wires come out from?
any other good grounding places?
sorry for all the noob questions guys. i havnt really done electrical stuff except amps and subs but that was 5 years ago lol.
anyway, again thanks for all the help!