F1 Stage 2 Clutch
#23
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
For the record,
The F1 stage 1,2,3 are the same pressure plate, which is Exedy's base OEM replacement $65 MZC610.
That pressure plate is from the $115 EXEDY KMZ03 OEM Replacement Clutch Kit
The disc is a Chinese made replica of the Exedy. That's it. No extra plate pressure, extra straps, heat treating, zip. Thus, folks with these clutches are slipping below 200whp. Exedy makes good quality stuff but this particular plate is their OEM replacement design. They do have higher capacity pressure plates but this one isn't it.
The F1 stage 1,2,3 are the same pressure plate, which is Exedy's base OEM replacement $65 MZC610.
That pressure plate is from the $115 EXEDY KMZ03 OEM Replacement Clutch Kit
The disc is a Chinese made replica of the Exedy. That's it. No extra plate pressure, extra straps, heat treating, zip. Thus, folks with these clutches are slipping below 200whp. Exedy makes good quality stuff but this particular plate is their OEM replacement design. They do have higher capacity pressure plates but this one isn't it.
https://www.miataturbo.net/general-m...23/#post264361
Originally Posted by Braineack FIVE, count that: 1-2-3-4-5, freakin' years ago!!!!!!!!1
the problem with the XTD and F1 Stage III and the reason they are so cheap is because it's utilizing a stock pressure plate. So you might get a nice 4 or 6-puck disc (F1 uses clutchnet), but you still have no extra clamping force.
Last edited by Braineack; 03-14-2013 at 12:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
graexodus
Miata parts for sale/trade
5
10-26-2015 01:48 PM