ever seen this manifold???
#22
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jun 2011
Location: Bonita springs florida
Posts: 348
Total Cats: -107
Sorry i spend more time in my garage than on this forum ...you are correct i did not spend much time searching, but not to buy would have been stupid just on a busness angle...i can certinly sell fur more than i paid. I first joined this site to unload parts and possibly meet a few people who share my passion for driving racing and hands on modifing these little cars. and i have made quite a few people happy with money i saved them
Sold torsen swaps for under $500, 1.8 long block $50, trans $75 ect ect
Yet most of you still get more enjoyment teasing people on the internet than actually networking with People that may be Good to know and fun to drive and do events with.
So feel free to ban me as there is no hope for my ignorance...I'll be out driving the **** out of my car having fun and wont care WHEN my junk Ebay $36 manifold breaks il buy somthing else
And the personal integrity of the men on this site has been noted
Sold torsen swaps for under $500, 1.8 long block $50, trans $75 ect ect
Yet most of you still get more enjoyment teasing people on the internet than actually networking with People that may be Good to know and fun to drive and do events with.
So feel free to ban me as there is no hope for my ignorance...I'll be out driving the **** out of my car having fun and wont care WHEN my junk Ebay $36 manifold breaks il buy somthing else
And the personal integrity of the men on this site has been noted
#24
And Brian i wasn't counting the shipping as that is a expense that is paid regardless of what product you buy that's from states away.
Just as i will charge shipping on it if i sell
But even tho you all say it's crap and the reviews bla bla bla for the money spent i say it's worth it even if just a experiment to test the breaking point first hand
Just as i will charge shipping on it if i sell
But even tho you all say it's crap and the reviews bla bla bla for the money spent i say it's worth it even if just a experiment to test the breaking point first hand
The alternative is to spend all of 5 minutes researching the matter, figure out the truth, and save yourself not only $51, but hours and hours installing, fabricating a downpipe, etc etc etc everything included in putting together a hotside setup on a turbo application.
Its obvious which group you relate to. But different strokes for different folks I guess.
We're all going to lose sleep over it
#25
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jun 2011
Location: Bonita springs florida
Posts: 348
Total Cats: -107
But then there is that getup of people who always manage to make things work no matter what....like when people didn't believe we put a rb25 in a cresseda and retro fit s15 suspention....or my lt1 rx7 with working ps ac that still handled.or a notchback in the 10s under 5k invested....but omfg not $51 lol....yeah i must be the poor ignorant type....and hours and hours of labor?? Do you work with your eyes closed? Hardly difficult to fab a dp.
Buy then again some people spend money others are craftsmen. And yes having somhing to start with and hold in my hand is worth less than 1hrs pay....I cab use it as a jig when it fails...or maybe just draw a template and relist it for $80....who cares.....Eather way I'm done with this Dick measuring contest
Buy then again some people spend money others are craftsmen. And yes having somhing to start with and hold in my hand is worth less than 1hrs pay....I cab use it as a jig when it fails...or maybe just draw a template and relist it for $80....who cares.....Eather way I'm done with this Dick measuring contest
#28
But then there is that getup of people who always manage to make things work no matter what....like when people didn't believe we put a rb25 in a cresseda and retro fit s15 suspention....or my lt1 rx7 with working ps ac that still handled.or a notchback in the 10s under 5k invested....but omfg not $51 lol....yeah i must be the poor ignorant type....and hours and hours of labor?? Do you work with your eyes closed? Hardly difficult to fab a dp.
Buy then again some people spend money others are craftsmen. And yes having somhing to start with and hold in my hand is worth less than 1hrs pay....I cab use it as a jig when it fails...or maybe just draw a template and relist it for $80....who cares.....Eather way I'm done with this Dick measuring contest
Buy then again some people spend money others are craftsmen. And yes having somhing to start with and hold in my hand is worth less than 1hrs pay....I cab use it as a jig when it fails...or maybe just draw a template and relist it for $80....who cares.....Eather way I'm done with this Dick measuring contest
We're all just "haters". We all have nothing better to do than knock down people with silly pipe dreams.
If you're such a master fabricator that a dp is no sweat for you and takes only minutes, then why in the world are you buying this hunk of junk when you can easily fabricate a manifold for a couple hundred bux that won't fall apart in a day or two?
Oh yeah that's right cause you're full of it, just like every other n00b like you that got all bent outa shape cause we made fun of them for being silly.
Its not a measuring contest. You're following a recipe for disaster to a tee, and what's shocking is that you, and people like you are too ignorant to even explore the possibility that this is ignorant.
Its always the same story:
"I just want 150whp, it should hold up fine"
"I just need it to last a couple days, after that I'll fab up my own"
"I have a welder and will be able to repair it"
"I will just use it as a template and build my own"
The truth is, none of that ever happens. And if it ever does, its like 2 outa 100 people that actualy do it. They are a very rare exception. The signal to noise ratio trend is exponentially against you. Basically you have everything to prove and we have nothing to prove. Because we know better.
#29
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
Sorry i spend more time in my garage than on this forum ...you are correct i did not spend much time searching, but not to buy would have been stupid just on a busness angle...i can certinly sell fur more than i paid. I first joined this site to unload parts and possibly meet a few people who share my passion for driving racing and hands on modifing these little cars. and i have made quite a few people happy with money i saved them
Sold torsen swaps for under $500, 1.8 long block $50, trans $75 ect ect
Yet most of you still get more enjoyment teasing people on the internet than actually networking with People that may be Good to know and fun to drive and do events with.
So feel free to ban me as there is no hope for my ignorance...I'll be out driving the **** out of my car having fun and wont care WHEN my junk Ebay $36 manifold breaks il buy somthing else
And the personal integrity of the men on this site has been noted
Sold torsen swaps for under $500, 1.8 long block $50, trans $75 ect ect
Yet most of you still get more enjoyment teasing people on the internet than actually networking with People that may be Good to know and fun to drive and do events with.
So feel free to ban me as there is no hope for my ignorance...I'll be out driving the **** out of my car having fun and wont care WHEN my junk Ebay $36 manifold breaks il buy somthing else
And the personal integrity of the men on this site has been noted
#30
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jun 2011
Location: Bonita springs florida
Posts: 348
Total Cats: -107
Never said that i can make a dp in minutes...nor am i a master fabricator buy yes i have made exhaust Dp and cat backs...no it's not hard...but yes i guess i am a noob at making a turbo manifold or even a turbo Miata.. that dont mean I'm a ignorant person.
But yes you talk like a ***** to people and regardless of your experiance with this particular application your aragance and condisending tone won't Get you far if you treat People that way. if you act this way on person you must find yourself in conflicting situations quite often....
But yes you talk like a ***** to people and regardless of your experiance with this particular application your aragance and condisending tone won't Get you far if you treat People that way. if you act this way on person you must find yourself in conflicting situations quite often....
#31
Never said that i can make a dp in minutes...nor am i a master fabricator buy yes i have made exhaust Dp and cat backs...no it's not hard...but yes i guess i am a noob at making a turbo manifold or even a turbo Miata.. that dont mean I'm a ignorant person.
But yes you talk like a ***** to people and regardless of your experiance with this particular application your aragance and condisending tone won't Get you far if you treat People that way. if you act this way on person you must find yourself in conflicting situations quite often....
But yes you talk like a ***** to people and regardless of your experiance with this particular application your aragance and condisending tone won't Get you far if you treat People that way. if you act this way on person you must find yourself in conflicting situations quite often....
I don't find myself in conflicting situations very often, because i tend to not associate myself with inferior people.
#36
Never said that i can make a dp in minutes...nor am i a master fabricator buy yes i have made exhaust Dp and cat backs...no it's not hard...but yes i guess i am a noob at making a turbo manifold or even a turbo Miata.. that dont mean I'm a ignorant person.
But yes you talk like a ***** to people and regardless of your experiance with this particular application your aragance and condisending tone won't Get you far if you treat People that way. if you act this way on person you must find yourself in conflicting situations quite often....
But yes you talk like a ***** to people and regardless of your experiance with this particular application your aragance and condisending tone won't Get you far if you treat People that way. if you act this way on person you must find yourself in conflicting situations quite often....
#40
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jun 2011
Location: Bonita springs florida
Posts: 348
Total Cats: -107
But then there is that getup of people who always manage to make things work no matter what....like when people didn't believe we put a rb25 in a cresseda and retro fit s15 suspention....or my lt1 rx7 with working ps ac that still handled.or a notchback in the 10s under 5k invested....but omfg not $51 lol....yeah i must be the poor ignorant type....and hours and hours of labor?? Do you work with your eyes closed? Hardly difficult to fab a dp.
Buy then again some people spend money others are craftsmen. And yes having somhing to start with and hold in my hand is worth less than 1hrs pay....I cab use it as a jig when it fails...or maybe just draw a template and relist it for $80....who cares.....Eather way I'm done with this Dick measuring contest
Buy then again some people spend money others are craftsmen. And yes having somhing to start with and hold in my hand is worth less than 1hrs pay....I cab use it as a jig when it fails...or maybe just draw a template and relist it for $80....who cares.....Eather way I'm done with this Dick measuring contest