efr 6258, a good low boost option?
#26
Elite Member
Thread Starter
iTrader: (6)
Join Date: Feb 2013
Location: A cave in Va
Posts: 3,395
Total Cats: 456
well then, I have an extra 500 or so for a set of rods. and a super small BB turbo.
Or the supercharger....aww geeeeze.
#27
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,976
Total Cats: 1,021
Buy the rods and rebuild your motor. (only if you're going to rebuild it anyway... at your boost levels, stock motor is fine...) Buy a used little turbo and manifold setup, they pop up from time to time. If you don't like it, sell it for what you paid. the engine management and rods are useful no matter what your FI.
#35
I'd say get a log, 2554, have fun.
I've done the ebay rod bit. They are every bit as good as the m-tuned or whatever. Took mine to the machine shop and had them balanced and the machinist couldn't tell the difference between my rods and a set of manley rods he had.
When I built my motor I went all out. If I did it again I'd just replace my rods maybe some arp head studs and call it a day.
I've done the ebay rod bit. They are every bit as good as the m-tuned or whatever. Took mine to the machine shop and had them balanced and the machinist couldn't tell the difference between my rods and a set of manley rods he had.
When I built my motor I went all out. If I did it again I'd just replace my rods maybe some arp head studs and call it a day.
Thread
Thread Starter
Forum
Replies
Last Post