DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Data Logging

Thread Tools
 
Search this Thread
 
Old 06-22-2006 | 11:45 PM
  #1  
DMD's Avatar
DMD
Thread Starter
Newb
 
Joined: Apr 2005
Posts: 16
Total Cats: 0
From: Beechworth Victoria Australia
Default Data Logging

I would like to data log fuel pressure to a Zeitronix Zt 02 unit as the 5th input user defined source. Can anyone recommend a pressure sensor that will supply the 0-5vdc input signal?
Old 06-23-2006 | 08:35 AM
  #2  
olderguy's Avatar
AFM Crusader
iTrader: (19)
 
Joined: Oct 2004
Posts: 4,685
Total Cats: 351
From: Wayne, NJ
Default

I run the autometer fuel pressure sensor into my ZT-2. The 0-5v is 0-100 psi so the percentage you read corresponds to the fuel pressure. It stops reading at 98 psi even if you go over 100
Old 06-24-2006 | 08:09 AM
  #3  
DMD's Avatar
DMD
Thread Starter
Newb
 
Joined: Apr 2005
Posts: 16
Total Cats: 0
From: Beechworth Victoria Australia
Default

Thank you for the quick response. On my way to Autobarn now.
Old 06-24-2006 | 11:12 AM
  #4  
olderguy's Avatar
AFM Crusader
iTrader: (19)
 
Joined: Oct 2004
Posts: 4,685
Total Cats: 351
From: Wayne, NJ
Default

I left out a word-- TPS--, I am using the TPS ZT-2 input for fuel 0-100% equals 0-100psi. You can also use the auxilliary input, but that will read the voltage and you will need to convert in your head.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Quinn
Cars for sale/trade
6
10-23-2016 08:58 AM
JasonC SBB
ECUs and Tuning
11
10-27-2015 05:56 PM




All times are GMT -4. The time now is 04:20 AM.