COP Thread
#602
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
fwiw, i just pussed out today and started wiring directly onto the coils.
#603
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I sent Y8s a Packard Electric pin yesterday I had that fits on the COP lazzer sent to see if it will work in the Toyota housing. The housings I have are only 3 terminal and have a rounded shape (like the GM BCS) so they won't work even with some modding. He should have it today. I've probably got about 50 pins and I'm sure they're probably cheap from Packard Electric if I can get a part number. I got them loose in a big electical/connector/crimp stuff toolbox I got with the car so they have no packaging for identification.
Frank
Frank
#604
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I aslo went to radio shack and bought a 22-pin connector with pins. I wanna see if they work, cuase if so it's a $2.50 solution. plus the $27 shipped for the connectors, you are looking at a total of $30.
fwiw, i bought about 100 extra ecu pins if they do work.
fwiw, i bought about 100 extra ecu pins if they do work.
#606
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
a sheet of alumin and a 1" hole saw will do it.
drill the holes for the three oem valve cover bolts, drill the 4 spark holes, and then drill 4 holes for the cop flanges.
then get 4 nuts and bolts, get bolts with a very shallow head stick up from underneath plate, and attach with thread locker and nut from above.
drill the holes for the three oem valve cover bolts, drill the 4 spark holes, and then drill 4 holes for the cop flanges.
then get 4 nuts and bolts, get bolts with a very shallow head stick up from underneath plate, and attach with thread locker and nut from above.
#607
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I was going to mock up a protoype COP plate and take it to a machine shop to have a run milled for general distribution, but there was not enough interest. only 2 or 3 guys wanted it, would probably need to get like 10+ involved to make it cost effective.
#608
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I sent Y8s a Packard Electric pin yesterday I had that fits on the COP lazzer sent to see if it will work in the Toyota housing. The housings I have are only 3 terminal and have a rounded shape (like the GM BCS) so they won't work even with some modding. He should have it today. I've probably got about 50 pins and I'm sure they're probably cheap from Packard Electric if I can get a part number. I got them loose in a big electical/connector/crimp stuff toolbox I got with the car so they have no packaging for identification.
Frank
Frank
#613
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
a sheet of alumin and a 1" hole saw will do it.
drill the holes for the three oem valve cover bolts, drill the 4 spark holes, and then drill 4 holes for the cop flanges.
then get 4 nuts and bolts, get bolts with a very shallow head stick up from underneath plate, and attach with thread locker and nut from above.
drill the holes for the three oem valve cover bolts, drill the 4 spark holes, and then drill 4 holes for the cop flanges.
then get 4 nuts and bolts, get bolts with a very shallow head stick up from underneath plate, and attach with thread locker and nut from above.
Regardless, hope to be COP-ped in a week and a half when they get here. $42 for a set of 4 off eBay, quite please (assuming they are right, ha!)
Wallyman
#615
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
great news.
the contacts I bought work for the toyota connectors and fit onto the cops (.070" contacts tyco PN: 173631). So you're looking at around $27 shipped for PnP connectors, and a dollar or two for the contacts from me. not bad.
if you need 16 pins let me know. i ordered about 100 extra or so.
the contacts I bought work for the toyota connectors and fit onto the cops (.070" contacts tyco PN: 173631). So you're looking at around $27 shipped for PnP connectors, and a dollar or two for the contacts from me. not bad.
if you need 16 pins let me know. i ordered about 100 extra or so.
#617
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
i think i got enough for 11 harness. two of which are spoken for, mine and y8s of course.
lets see, i bought 296 of them (think i got more), need 96 for my boomslang harnesses, that leaves 200 left over for coil connectors, and i need 32, so 168/16 = 10.5...so enough for 10 yeah.
lets see, i bought 296 of them (think i got more), need 96 for my boomslang harnesses, that leaves 200 left over for coil connectors, and i need 32, so 168/16 = 10.5...so enough for 10 yeah.