Originally Posted by lazzer408
(Post 147637)
Well I ordered the 10 they had. I'm waiting for 2 more. Of the 3 people who ordered coils, someone is going to have to wait for the remaining 2. I'm giving them a set of connectors for the trouble. Any volunteers?
I also have one extra set of connectors. You might have to extend the wire from the terminal itself because the pigtail was cut short. (about 1"). Someone make me an offer on them. |
Originally Posted by Braineack
(Post 147685)
that name is familar...he should have freakin' sold them here.
|
i have connectors on order...i didnt know you had any! :(
|
bad news guysssss
the toyota connectors I got are just the housings. NO PINS. maybe I'll order those from GMpartsdirectrapemyass |
Coils are shipped.
cjernigan, I sent the 2 coils and the connectors so at least you can get going on your harness and hold-downs. |
Originally Posted by y8s
(Post 147970)
bad news guysssss
the toyota connectors I got are just the housings. NO PINS. maybe I'll order those from GMpartsdirectrapemyass |
Sweet, thanks! Now in 4-6 weeks I'll have some coils! :)
|
Originally Posted by jayc72
(Post 148050)
Sweet, thanks! Now in 4-6 weeks I'll have some coils! :)
|
Originally Posted by lazzer408
(Post 148018)
Coils are shipped.
cjernigan, I sent the 2 coils and the connectors so at least you can get going on your harness and hold-downs. |
Anyone find a source for the male pins that fit into the coil connector plugs? I am trying to figure out a way to use male pins to plug into my OEM coil plugs so I don't have to cut into the harness. Thanks.
|
Originally Posted by soflarick
(Post 148240)
Anyone find a source for the male pins that fit into the coil connector plugs? I am trying to figure out a way to use male pins to plug into my OEM coil plugs so I don't have to cut into the harness. Thanks.
|
I might be able to get a hold of quite a few connectors from the U-Pull here. The wires are REALLY short on them, but they do have pins.
|
I've got a big pack of various connectors, and a friends shop who developed some COPs that might have similar connector. I'll see what I can come up with when I get the coils from lazzer408.
Frank |
frank, you want a connector shell from the toyota to fit a pin into to see if we can get other pins somewhere? the shells are super cheap.
|
How are you guys doing the 12v, are you running a single wire from the miata harness and splicing it four times, or are you running four separate wires from the miata harness all the way down to the pins on the plug?
I know ELECTRICALLY it doesn't matter much, but for packaging reasons, I'd assume the 4-splice method is much cleaner. |
ill be placing an order for ecu contact/pins/terminals today matt....so if you can wait ill get some for you as well, should work with our housings.
|
Originally Posted by Braineack
(Post 148858)
ill be placing an order for ecu contact/pins/terminals today matt....so if you can wait ill get some for you as well, should work with our housings.
|
Originally Posted by y8s
(Post 148862)
where you gettin em from? I guess technically I only need 12 right? dont need the tach output populated.
|
Originally Posted by cjernigan
(Post 148879)
Where do we get out tach output on the NBs? I haven't gone through the schematic. I assume it comes from the crank sensor though.
Frank |
actually I'm not sure. the hydra gets tach from the crank sensor.
let me check my manjual. edit I lied. the hydra provides the tach signal, formerly pin 3O on the 2001. |
All times are GMT -4. The time now is 08:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands