Chucks build thread
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I purchased a 1995 Mazda Miata yesterday. It was non-running due to blown head gasket. It has many dents and the center console was ripped apart from someone stealing the radio. I got it for $800 though so can't complain.
My goals are to make it into a stripped track car with occasional drag racing 2200lbs with turbo and rollbar. My build is going to be:
Engine:
99 Head
Belfab HP KIT
83.5MM 9:1 Pistons
Belfab Rods
Hp Rod Bolts
ARP Head Studs
ARP Main Studs
Supertech 1mm oversized intake and exhaust valves
Port and Polish
5-angle valve job
BEGI Intake Manifold
BEGI SSM KIT
GT2871 52trim .64 a/r
Seperated gases downpipe
Intercooler 18x12x3 Core
Greddy Type RS BOV
Toyota COP's
Fidanza Cam Gear
M-tuned Fuel Rail
550cc RX-7 Injectors (anybody have any extras even one?)
Stock or ? TB (I want to keep the stock IAC)
3" Mandrel Bent Exhaust with Magnecor muffler
NX Wet Kit 35-50-75shot for drag racing
ECU
Megasquirt running parallel built by BRAINEACK (thanks)
LC-1 Wideband W/ Gauge
Suspenion
KYB AGX Struts
Racing Beat Springs
Racing Beat Complete Front and Rear Sway Bars
M2 Rollbar
Transmission
5spd untill it blows up then 6spd
4.10 torsen untill I have enough for the 3.63
ACT Extreme Clutch and Flywheel (Happy Meal FTW)
Fidanza short shifter
Knobmeister Magnum black textured 6-spd Shift ****
Brakes
HAWK HPS Front and Rear Pads
Slotted Rotors
Stainless Steal brake lines
Wheels
SSK 031 Time Attack Color (volk knock offs) $250 on ebay! (We'll see how they do hopefully when I come out of my garage I don't bend my rim on the 1" bump)
225/50r15 Bfgoodrich Sports for street untill I do a few track days and get use to the car then Ra1's
Cooling
Mishimoto Radiator
1.3 Bar Cap
20% Anti-Freeze 80% Water w/ Water Wetter
My goals are to make it into a stripped track car with occasional drag racing 2200lbs with turbo and rollbar. My build is going to be:
Engine:
99 Head
Belfab HP KIT
83.5MM 9:1 Pistons
Belfab Rods
Hp Rod Bolts
ARP Head Studs
ARP Main Studs
Supertech 1mm oversized intake and exhaust valves
Port and Polish
5-angle valve job
BEGI Intake Manifold
BEGI SSM KIT
GT2871 52trim .64 a/r
Seperated gases downpipe
Intercooler 18x12x3 Core
Greddy Type RS BOV
Toyota COP's
Fidanza Cam Gear
M-tuned Fuel Rail
550cc RX-7 Injectors (anybody have any extras even one?)
Stock or ? TB (I want to keep the stock IAC)
3" Mandrel Bent Exhaust with Magnecor muffler
NX Wet Kit 35-50-75shot for drag racing
ECU
Megasquirt running parallel built by BRAINEACK (thanks)
LC-1 Wideband W/ Gauge
Suspenion
KYB AGX Struts
Racing Beat Springs
Racing Beat Complete Front and Rear Sway Bars
M2 Rollbar
Transmission
5spd untill it blows up then 6spd
4.10 torsen untill I have enough for the 3.63
ACT Extreme Clutch and Flywheel (Happy Meal FTW)
Fidanza short shifter
Knobmeister Magnum black textured 6-spd Shift ****
Brakes
HAWK HPS Front and Rear Pads
Slotted Rotors
Stainless Steal brake lines
Wheels
SSK 031 Time Attack Color (volk knock offs) $250 on ebay! (We'll see how they do hopefully when I come out of my garage I don't bend my rim on the 1" bump)
225/50r15 Bfgoodrich Sports for street untill I do a few track days and get use to the car then Ra1's
Cooling
Mishimoto Radiator
1.3 Bar Cap
20% Anti-Freeze 80% Water w/ Water Wetter
Last edited by ChuckyZ; 01-28-2009 at 11:15 PM.
#2
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Here are pictures of the car. I had just gotten it home and hadn't cleaned it yet. I did take off the hood though.
100_0413.jpg?t=1233199842
100_0414.jpg?t=1233199879
100_0415.jpg?t=1233199910
100_0416.jpg?t=1233199930
100_0417.jpg?t=1233199952
100_0418.jpg?t=1233199970
100_0419.jpg?t=1233199989
100_0421.jpg?t=1233200014
100_0425.jpg?t=1233200043
100_0413.jpg?t=1233199842
100_0414.jpg?t=1233199879
100_0415.jpg?t=1233199910
100_0416.jpg?t=1233199930
100_0417.jpg?t=1233199952
100_0418.jpg?t=1233199970
100_0419.jpg?t=1233199989
100_0421.jpg?t=1233200014
100_0425.jpg?t=1233200043
#3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thats a big expensive list. Are you doing it all at once or over time?
And why does everyone want 363's.
The car is actually pretty nice. Just needs seat covers, a door, and love on the quarter panel. But if you are just tracking it. I'd just drive it. Someone might hit you anyway.
Sounds like it is going to RUN!
Good Luck!
And why does everyone want 363's.
The car is actually pretty nice. Just needs seat covers, a door, and love on the quarter panel. But if you are just tracking it. I'd just drive it. Someone might hit you anyway.
Sounds like it is going to RUN!
Good Luck!
#8
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So far i've order everything for the engine except the begi turbo kit, fuel rail, injectors, and intake manifold. Also haven't ordered sway bars, radiator, rollbar, clutch and flywheel.
My first part arrive today. The smallest part I ordered of course
100_0447.jpg?t=1233200412
Tomorrow, Friday, Saturday, and Monday will be like Christmas, Birthday, and Steak and BJ day (Houston Holiday) all rolled into one.
Today I picked up my 99 head from local junkyard for $350. They have two more I think and a few 01+'s for $450. I also removed the engine and tore everything out of the trunk and started on the interior. I need to buy some dry ice or a heat gun for the sound deading/tar.![CRX](https://www.miataturbo.net/images/smilies/pissed.gif)
100_0435.jpg?t=1233200617
100_0436.jpg?t=1233200620
100_0433.jpg?t=1233200616
My first part arrive today. The smallest part I ordered of course
100_0447.jpg?t=1233200412
Tomorrow, Friday, Saturday, and Monday will be like Christmas, Birthday, and Steak and BJ day (Houston Holiday) all rolled into one.
Today I picked up my 99 head from local junkyard for $350. They have two more I think and a few 01+'s for $450. I also removed the engine and tore everything out of the trunk and started on the interior. I need to buy some dry ice or a heat gun for the sound deading/tar.
![CRX](https://www.miataturbo.net/images/smilies/pissed.gif)
100_0435.jpg?t=1233200617
100_0436.jpg?t=1233200620
100_0433.jpg?t=1233200616
#10
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![Bang](https://www.miataturbo.net/images/smilies/bang.gif)
#11
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thats a big expensive list. Are you doing it all at once or over time?
And why does everyone want 363's.
The car is actually pretty nice. Just needs seat covers, a door, and love on the quarter panel. But if you are just tracking it. I'd just drive it. Someone might hit you anyway.
Sounds like it is going to RUN!
Good Luck!
And why does everyone want 363's.
The car is actually pretty nice. Just needs seat covers, a door, and love on the quarter panel. But if you are just tracking it. I'd just drive it. Someone might hit you anyway.
Sounds like it is going to RUN!
Good Luck!
Yeah i'm going to keep the aerodynamic modifications (aka dents). Never cared on how the car looks except I like black so i'm selling the tan top and buying a black one. Plus i'm going to get some black clotch seats (lighter)
3.63's Are great for turbo's. They will keep you in 4th gear in qt mile, they load up the turbo longer, and it makes first gear usefull. N/A you want the opposite 4.3
Last edited by ChuckyZ; 01-28-2009 at 11:18 PM.
#12
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Also if anybody wants to see some of my old cars here a few videos on youtube.
YouTube - thumper2750's Channel
Highlights:
193mph Nitrous C6 Vette "Big yella", 11.1@128mph
260z Turbo "Whistler", 11.6@123mph
280zx Turbo "GHETTO BEAST", 400lb-tq 12.4&112mph
GTO Nitrous "Aussie done good", 12.2@115mph doing the only thing its good for burning tires
YouTube - thumper2750's Channel
Highlights:
193mph Nitrous C6 Vette "Big yella", 11.1@128mph
260z Turbo "Whistler", 11.6@123mph
280zx Turbo "GHETTO BEAST", 400lb-tq 12.4&112mph
GTO Nitrous "Aussie done good", 12.2@115mph doing the only thing its good for burning tires
Last edited by ChuckyZ; 01-29-2009 at 12:49 AM.
#15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hey Chuck, do you have a caliper handy? I say you have the head off that motor F/S, but I was wondering if you could go measure the bore spacing. or hell, if you have the head off, and a caliper, could you measure the thickness between two cylinders and the bore diameter?
Looks like one hell of a list of parts.
Looks like one hell of a list of parts.
#16
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hey Chuck, do you have a caliper handy? I say you have the head off that motor F/S, but I was wondering if you could go measure the bore spacing. or hell, if you have the head off, and a caliper, could you measure the thickness between two cylinders and the bore diameter?
Looks like one hell of a list of parts.
Looks like one hell of a list of parts.
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The stock one, though they're both the same bore and spacing, so either measurement will do. If you happen to get a caliper, I'd appreciate the measurements. Need some numbers that are within .001 or so. FWIW, I got my caliper at Autozone for $20 and it's the same one Enco sells for 30 in a different color case. (I have both, lol)
#18
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I would normally agree with you but because of the 6-spds close ratios and i'm hopefully going to have a wide power band I think the 3.63's will benefit me. Especially since the tracks around here have some good straight aways and high-speed turns. Plus I like long gears. Maybe when I switch i'll switch back.
#20
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yeah I've been thinking about traction issues. I will only put nitrous on if I think my street tires will handle it in 3rd gear. Then again I do plan on getting another 2 rims and putting some drag radials on. Doesn't matter right now it is definitely the last thing I will do so I've got a month or two to thing about it.