Built Engine Max Boost
#101
You don't have a ******* clue dude. If you did, you would have stopped posting all the BS about boost=flow pages ago.
#102
Can a mod edit all of Chuckyz's posts to:
#103
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
The volume is constant once every revolution. And since that is happening 10 times a second at idle then its safe to assume to that when you have denser air it is because the pressure has increased or temp or both. But i'm only dealing with pressure beacause its easier.
#104
plane and simple there is no answer to your question (as stated before). The amount of PSI that will break your engine is entirely dependent on what turbo you use, the end. If you search you will see that when a question of this type is asked, people usually tell the person to set a base horsepower level, not PSI level, because there are a million and one ways to get to said horsepower.
#108
Explain to me when volume is constant in a otto cycle again? What's the definition of work again? Pdv?
#109
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
plane and simple there is no answer to your question (as stated before). The amount of PSI that will break your engine is entirely dependent on what turbo you use, the end. If you search you will see that when a question of this type is asked, people usually tell the person to set a base horsepower level, not PSI level, because there are a million and one ways to get to said horsepower.
#111
#112
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
No, the volume is constantly reducing itself. Again, you can reduce boost pressure in an engine by simply opening the port sizes up. The flow doesn't decrease, the density of air doesn't decrease, but the boost pressure measured drops.
It CAN'T BE A FACT BECAUSE FACTS AREN'T INCORRECT.
It CAN'T BE A FACT BECAUSE FACTS AREN'T INCORRECT.
#113
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
If you decrease boost/pressure you decrease density.
Changes of density
In general density can be changed by changing either the pressure or the temperature. Increasing the pressure will always increase the density of a material. Increasing the temperature generally decreases the density, but there are notable exceptions to this generalisation. For example, the density of water increases between its melting point at 0 °C and 4 °C and similar behaviour is observed in silicon at low temperatures.
The effect of pressure and temperature on the densities of liquids and solids is small so that a typical compressibility for a liquid or solid is 10–6 bar–1 (1 bar=0.1 MPa) and a typical thermal expansivity is 10–5 K–1.
In contrast, the density of gases is strongly affected by pressure. Boyle's law says that the density of an ideal gas is given by
d=(m*p)/(r*t)
where R is the universal gas constant, P is the pressure, M the molar mass, and T the absolute temperature.
This means that a gas at 300 K and 1 bar will have its density doubled by increasing the pressure to 2 bar or by reducing the temperature to 150 K.
Iridium is the densest known substance at standard conditions for temperature and pressure.
Changes of density
In general density can be changed by changing either the pressure or the temperature. Increasing the pressure will always increase the density of a material. Increasing the temperature generally decreases the density, but there are notable exceptions to this generalisation. For example, the density of water increases between its melting point at 0 °C and 4 °C and similar behaviour is observed in silicon at low temperatures.
The effect of pressure and temperature on the densities of liquids and solids is small so that a typical compressibility for a liquid or solid is 10–6 bar–1 (1 bar=0.1 MPa) and a typical thermal expansivity is 10–5 K–1.
In contrast, the density of gases is strongly affected by pressure. Boyle's law says that the density of an ideal gas is given by
d=(m*p)/(r*t)
where R is the universal gas constant, P is the pressure, M the molar mass, and T the absolute temperature.
This means that a gas at 300 K and 1 bar will have its density doubled by increasing the pressure to 2 bar or by reducing the temperature to 150 K.
Iridium is the densest known substance at standard conditions for temperature and pressure.
#114
Idiot (usage)
From Wikipedia, the free encyclopedia
Jump to: navigation, search
For other uses, see Idiot (usage) (disambiguation).
Semi-protected
Idiot is a word derived from the Greek ἰδιώτης, idiōtēs ("person lacking professional skill," "a private citizen," "individual"), from ἴδιος, idios ("private," "one's own").[1] In Latin the word idiota ("ordinary person, layman") preceded the Late Latin meaning "uneducated or ignorant person."[2] Its modern meaning and form dates back to Middle English around the year 1300, from the Old French idiote ("uneducated or ignorant person"). The related word idiocy dates to 1487 and may have been analogously modeled on the words prophet[3] and prophecy.[4][5] The word has cognates in many other languages.
History
"Idiot" was originally created to refer to "layman, person lacking professional skill", "person so mentally deficient as to be incapable of ordinary reasoning".[6][7] Declining to take part in public life, such as democratic government of the polis (city state), such as the Athenian democracy, was considered dishonorable. "Idiots" were seen as having bad judgment in public and political matters. Over time, the term "idiot" shifted away from its original connotation of selfishness and came to refer to individuals with overall bad judgment–individuals who are "stupid". In modern English usage, the terms "idiot" and "idiocy" describe an extreme folly or stupidity, and its symptoms (foolish or stupid utterance or deed). In psychology, it is a historical term for the state or condition now called profound mental retardation.[8]
From Wikipedia, the free encyclopedia
Jump to: navigation, search
For other uses, see Idiot (usage) (disambiguation).
Semi-protected
Idiot is a word derived from the Greek ἰδιώτης, idiōtēs ("person lacking professional skill," "a private citizen," "individual"), from ἴδιος, idios ("private," "one's own").[1] In Latin the word idiota ("ordinary person, layman") preceded the Late Latin meaning "uneducated or ignorant person."[2] Its modern meaning and form dates back to Middle English around the year 1300, from the Old French idiote ("uneducated or ignorant person"). The related word idiocy dates to 1487 and may have been analogously modeled on the words prophet[3] and prophecy.[4][5] The word has cognates in many other languages.
History
"Idiot" was originally created to refer to "layman, person lacking professional skill", "person so mentally deficient as to be incapable of ordinary reasoning".[6][7] Declining to take part in public life, such as democratic government of the polis (city state), such as the Athenian democracy, was considered dishonorable. "Idiots" were seen as having bad judgment in public and political matters. Over time, the term "idiot" shifted away from its original connotation of selfishness and came to refer to individuals with overall bad judgment–individuals who are "stupid". In modern English usage, the terms "idiot" and "idiocy" describe an extreme folly or stupidity, and its symptoms (foolish or stupid utterance or deed). In psychology, it is a historical term for the state or condition now called profound mental retardation.[8]
#116
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
Idiot (usage)
From Wikipedia, the free encyclopedia
Jump to: navigation, search
For other uses, see Idiot (usage) (disambiguation).
Semi-protected
Idiot is a word derived from the Greek ἰδιώτης, idiōtēs ("person lacking professional skill," "a private citizen," "individual"), from ἴδιος, idios ("private," "one's own").[1] In Latin the word idiota ("ordinary person, layman") preceded the Late Latin meaning "uneducated or ignorant person."[2] Its modern meaning and form dates back to Middle English around the year 1300, from the Old French idiote ("uneducated or ignorant person"). The related word idiocy dates to 1487 and may have been analogously modeled on the words prophet[3] and prophecy.[4][5] The word has cognates in many other languages.
History
"Idiot" was originally created to refer to "layman, person lacking professional skill", "person so mentally deficient as to be incapable of ordinary reasoning".[6][7] Declining to take part in public life, such as democratic government of the polis (city state), such as the Athenian democracy, was considered dishonorable. "Idiots" were seen as having bad judgment in public and political matters. Over time, the term "idiot" shifted away from its original connotation of selfishness and came to refer to individuals with overall bad judgment–individuals who are "stupid". In modern English usage, the terms "idiot" and "idiocy" describe an extreme folly or stupidity, and its symptoms (foolish or stupid utterance or deed). In psychology, it is a historical term for the state or condition now called profound mental retardation.[8]
From Wikipedia, the free encyclopedia
Jump to: navigation, search
For other uses, see Idiot (usage) (disambiguation).
Semi-protected
Idiot is a word derived from the Greek ἰδιώτης, idiōtēs ("person lacking professional skill," "a private citizen," "individual"), from ἴδιος, idios ("private," "one's own").[1] In Latin the word idiota ("ordinary person, layman") preceded the Late Latin meaning "uneducated or ignorant person."[2] Its modern meaning and form dates back to Middle English around the year 1300, from the Old French idiote ("uneducated or ignorant person"). The related word idiocy dates to 1487 and may have been analogously modeled on the words prophet[3] and prophecy.[4][5] The word has cognates in many other languages.
History
"Idiot" was originally created to refer to "layman, person lacking professional skill", "person so mentally deficient as to be incapable of ordinary reasoning".[6][7] Declining to take part in public life, such as democratic government of the polis (city state), such as the Athenian democracy, was considered dishonorable. "Idiots" were seen as having bad judgment in public and political matters. Over time, the term "idiot" shifted away from its original connotation of selfishness and came to refer to individuals with overall bad judgment–individuals who are "stupid". In modern English usage, the terms "idiot" and "idiocy" describe an extreme folly or stupidity, and its symptoms (foolish or stupid utterance or deed). In psychology, it is a historical term for the state or condition now called profound mental retardation.[8]
#117
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Houston
Posts: 194
Total Cats: 0
So when I prove myself right you become alittle crybaby. And volume is constant. You only have so much piping, intercooler, manifold, and combustion chamber. You fill it the same amount every 360 degress.