BEGi-S inventory and instructions
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Parts of my BEGi-S kit arrived today. I was looking through the inventory sheets and it looks like each bag is filled and labelled correctly. However, when I look at the instructions, the directions for each bag does not match the actual contents.
Did anybody else have this issue?
Thanks!
Did anybody else have this issue?
Thanks!
#3
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks Sam, but I'm asking people who have installed a BEGi kit if they have the same issue with their instructions. If it's typical then I won't bother Stephanie on Moday morning. But, if it's something that needs to be brought to their attention then I will give them a call.
But yeah, I can figure out how everything goes together as long as everything is there and there is something to follow.
But yeah, I can figure out how everything goes together as long as everything is there and there is something to follow.
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks Sam, but I'm asking people who have installed a BEGi kit if they have the same issue with their instructions. If it's typical then I won't bother Stephanie on Moday morning. But, if it's something that needs to be brought to their attention then I will give them a call.
But yeah, I can figure out how everything goes together as long as everything is there and there is something to follow.
But yeah, I can figure out how everything goes together as long as everything is there and there is something to follow.
Check the position of the bungs in your downpipe before assembling(hold it in place under the car), you may need to go to a local muffler guy to get them moved or additional ones in the right places.
#6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Parts of my BEGi-S kit arrived today. I was looking through the inventory sheets and it looks like each bag is filled and labelled correctly. However, when I look at the instructions, the directions for each bag does not match the actual contents.
Did anybody else have this issue?
Thanks!
Did anybody else have this issue?
Thanks!
#8
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
When some of us helped Budget Racer last week, it seemed like there were more parts than the instructions called for, and the bags did not seem to match the instuctions all that well, but I got there late.
Check the position of the bungs in your downpipe before assembling(hold it in place under the car), you may need to go to a local muffler guy to get them moved or additional ones in the right places.
Check the position of the bungs in your downpipe before assembling(hold it in place under the car), you may need to go to a local muffler guy to get them moved or additional ones in the right places.
#11
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I definately found mistakes in the instructions as to what bag goes to what exactly. Overall it was not that bad and I know I have random bags with left over things in then. I installed most of the stuff just by guessing and going in what seemed to be a logical order.
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well Corky bags all of the parts himself and the items in each bag are correct. The issue is that who ever made the directions did not confirm what bag #'s when typing the directions. I also had several picture references in the instructions and their was not a picture on the sheets to ref to. This was my first full turbo install so I am no pro at it thats why I depended on the instructions for everything.
#15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Stephanie would be the guilty one. I actually just removed all the bag # references in the instructions. With all of the the customization, bags get re-numbered and it does not work so well any more. I am open to suggestions... I do apologize for all the confusion.
Stephanie
p.s. if you have a BEGi-S with some upgrades, those will not be in the instructions yet either. I am fixing that right now, and will post on web ASAP.
http://www.bellengineering.net/Pages...alsupport.html
Stephanie
p.s. if you have a BEGi-S with some upgrades, those will not be in the instructions yet either. I am fixing that right now, and will post on web ASAP.
http://www.bellengineering.net/Pages...alsupport.html
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM
thumpetto007
General Miata Chat
17
09-17-2015 06:01 PM