Bad Garrett out of the box??? with pics
#62
Wirelessly posted
The best bagels are boiled and baked New York style. When I lived in houston I'd drive 15 minutes each way to this one shop because it was the best in town. Bagels made by real old school Jews. Or at least by Mexicans under the direct supervision of Jews. They had a banana nut bagel that I still long for.
The best bagels are boiled and baked New York style. When I lived in houston I'd drive 15 minutes each way to this one shop because it was the best in town. Bagels made by real old school Jews. Or at least by Mexicans under the direct supervision of Jews. They had a banana nut bagel that I still long for.
#67
Were other bolts loose too? Assembling it wrong can kill it too.
I loosened the six hot side bolts 1/2 each in a criss cross patern, clocked it then tighten them, criss cross in stages to the recommended torque. Exactly how the included instructions say. They didn't mentions centering but i did rotate the shaft by hand afterwards and there was no binding.
Still could be a piston ring, or something like that. Or metal shavings from various parts or fittings used. I'm a boyscout about taping off all the ports on anything I'm working on. I ran a nut through a small block in high school, lesson learned. Good compression all the way across, can't do a leak down right now, I don't have the kit.
Did you check the inside of the manifold? Checked out the entire inside of the exhaust manifold with a dental mirror and and flash light. I didn't see anything, No marks, scratches, or gremlins
Stephanie
I loosened the six hot side bolts 1/2 each in a criss cross patern, clocked it then tighten them, criss cross in stages to the recommended torque. Exactly how the included instructions say. They didn't mentions centering but i did rotate the shaft by hand afterwards and there was no binding.
Still could be a piston ring, or something like that. Or metal shavings from various parts or fittings used. I'm a boyscout about taping off all the ports on anything I'm working on. I ran a nut through a small block in high school, lesson learned. Good compression all the way across, can't do a leak down right now, I don't have the kit.
Did you check the inside of the manifold? Checked out the entire inside of the exhaust manifold with a dental mirror and and flash light. I didn't see anything, No marks, scratches, or gremlins
Stephanie
Stephanie, thank you for the interest, you're keeping me on my toes and making me think about anything I might have missed.
#70
im not racist, but for the love of god indians do not need to own resturants. if they didnt take over the chain and things were done the good ole fashoned way that place would be makin some killer bank! not to mention the wages would be a lil higher!
when they took over they ditched the kitchen and started ordering all the donuts and having them brought in once a day! when that happend they dropped the pay from salary (equaled out to bout 11 bucks an hour) to 8 bucks an hour. the mother ******* cant even pay their bills. there bout to repo our pepsi cooler cause they arnt payin for the ****!
#72
One of the fins in the photo is shiny on the outer edge, and none of the others are shiny. Seems odd, as if it something hit the front face of the impeller wheel.
Also, Ive looked at a lot of turbo wheels and have never seen fins that have a almost chiseled look like in the photo. All of the wheels Ive ever looked at were very smooth and finished.
Also, Ive looked at a lot of turbo wheels and have never seen fins that have a almost chiseled look like in the photo. All of the wheels Ive ever looked at were very smooth and finished.
#74
And the lastest... Nothing, still waiting on Garrett's verdict.
I think you might being seeing the one blade with white paint on it. All the turbos I've seen have one blade on each side color marked. Must be for balancing or indexing, I'm not really sure. As far as the chiseling... I have no idea.
I'll let you know if I when I hear from Garrett.
One of the fins in the photo is shiny on the outer edge, and none of the others are shiny. Seems odd, as if it something hit the front face of the impeller wheel.
Also, Ive looked at a lot of turbo wheels and have never seen fins that have a almost chiseled look like in the photo. All of the wheels Ive ever looked at were very smooth and finished.
Also, Ive looked at a lot of turbo wheels and have never seen fins that have a almost chiseled look like in the photo. All of the wheels Ive ever looked at were very smooth and finished.
I'll let you know if I when I hear from Garrett.
#75
i've ruined a turbo by clocking and not properly seating the CHRA in the compressor housing.
was the shaft still straight after this happened? I'd be super surprised if the blade contact didn't bend it.
best of luck.
#78
After six weeks at Garrett this is the report they sent. (see pic)
As a side note, Just to get the car on the track, I removed the manifold and downpipe and added a china header. The Link has a map for N/A Big injectors and after some fine tuning the car ran great at Roebling. No abrasive anything flying out of the motor. I guess I had more faith in their engineers coming up with something better then that. This is almost insulting.
I wrote the distributor to find out if there is a way to have it re-evaluated or if I should call my lawyer. I'll keep you updated.
As a side note, Just to get the car on the track, I removed the manifold and downpipe and added a china header. The Link has a map for N/A Big injectors and after some fine tuning the car ran great at Roebling. No abrasive anything flying out of the motor. I guess I had more faith in their engineers coming up with something better then that. This is almost insulting.
I wrote the distributor to find out if there is a way to have it re-evaluated or if I should call my lawyer. I'll keep you updated.
#80
test pipe. And the down pipe was originally coated with a ton of oil from the previous turbos non-existent seals. I would have seen something when I installed the new turbo and cleaned the WBO2. I went through the manifold with a damn dental mirror and a flex light to check for any marking...nothing.