16g wastegate setting
#1
Elite Member
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Location: Marietta, GA
Posts: 2,195
Total Cats: 1
16g wastegate setting
So, anybody know what a 16g wastegate actuator is set for? I imagine there are a few variants out there. I have two actuators, so what could they possibly be? I've searched around, and had conflicting/difficult to translate info. Any help appreciated.
#7
prestavalve bike pump with a gauge, cheap (less than 20$ some places) and the presta fitting just stick the wastegate in. mine has a gauge.
I think mine is 10psi (+/-psi) the one I had before was 8psi... I think different applications had different settings. good luck trying to find it documented... all the dsm boards are is bitching about boost creep at 15psi...
I think mine is 10psi (+/-psi) the one I had before was 8psi... I think different applications had different settings. good luck trying to find it documented... all the dsm boards are is bitching about boost creep at 15psi...
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM