10 bucks Turbo heat shield.
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Chicago, IL
Posts: 10,470
Total Cats: 1,812
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well here it is. I went to home depot and bought a nice big 12x24 piece of Aluminum - $9.xx.
I was thinking fo wrapping it around and over the turbo but i settled on this design due to its simplicity and i wanted to leave some air for the turbo to get some ventilation at least from the radiator fans
red = area completely removed from sheet
blue = fold line
blue circle = bolt
![Name: heatshield.gif
Views: 1038
Size: 10.2 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202521d1501246130-10-bucks-turbo-heat-shield-heatshield.gif)
![Name: Image012.jpg
Views: 1168
Size: 172.3 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202522d1501246130-10-bucks-turbo-heat-shield-image012.jpg)
![Name: Image013.jpg
Views: 1453
Size: 119.3 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202523d1501246130-10-bucks-turbo-heat-shield-image013.jpg)
![Name: Image014.jpg
Views: 1056
Size: 135.9 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202524d1501246130-10-bucks-turbo-heat-shield-image014.jpg)
![Name: Image015.jpg
Views: 1054
Size: 132.0 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202525d1501246130-10-bucks-turbo-heat-shield-image015.jpg)
![Name: Image016.jpg
Views: 1028
Size: 109.8 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202526d1501246130-10-bucks-turbo-heat-shield-image016.jpg)
Also 1 question, When bending the metal pipe that goes underneath the headers/manifold for the heater hoses, i crushed it a little bit. Will that be a problem? Its not penetrated however its crushed a bit.
after further talk in this thread, i decided to add a top to my heat shield which doubled the price of it however its still less than half the price to the next alternative from the store/internet.
if i had done this out of the car the folds would have been on the inside and looked much better but i got lazy
few pics of my top cover
![Name: Image001-1.jpg
Views: 1001
Size: 116.5 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202527d1501246130-10-bucks-turbo-heat-shield-image001-1.jpg)
![Name: Image002-1.jpg
Views: 1018
Size: 73.0 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202528d1501246130-10-bucks-turbo-heat-shield-image002-1.jpg)
I was thinking fo wrapping it around and over the turbo but i settled on this design due to its simplicity and i wanted to leave some air for the turbo to get some ventilation at least from the radiator fans
red = area completely removed from sheet
blue = fold line
blue circle = bolt
![Name: heatshield.gif
Views: 1038
Size: 10.2 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202521d1501246130-10-bucks-turbo-heat-shield-heatshield.gif)
![Name: Image012.jpg
Views: 1168
Size: 172.3 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202522d1501246130-10-bucks-turbo-heat-shield-image012.jpg)
![Name: Image013.jpg
Views: 1453
Size: 119.3 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202523d1501246130-10-bucks-turbo-heat-shield-image013.jpg)
![Name: Image014.jpg
Views: 1056
Size: 135.9 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202524d1501246130-10-bucks-turbo-heat-shield-image014.jpg)
![Name: Image015.jpg
Views: 1054
Size: 132.0 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202525d1501246130-10-bucks-turbo-heat-shield-image015.jpg)
![Name: Image016.jpg
Views: 1028
Size: 109.8 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202526d1501246130-10-bucks-turbo-heat-shield-image016.jpg)
Also 1 question, When bending the metal pipe that goes underneath the headers/manifold for the heater hoses, i crushed it a little bit. Will that be a problem? Its not penetrated however its crushed a bit.
after further talk in this thread, i decided to add a top to my heat shield which doubled the price of it however its still less than half the price to the next alternative from the store/internet.
if i had done this out of the car the folds would have been on the inside and looked much better but i got lazy
few pics of my top cover
![Name: Image001-1.jpg
Views: 1001
Size: 116.5 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202527d1501246130-10-bucks-turbo-heat-shield-image001-1.jpg)
![Name: Image002-1.jpg
Views: 1018
Size: 73.0 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202528d1501246130-10-bucks-turbo-heat-shield-image002-1.jpg)
![Name: Image004.jpg
Views: 1071
Size: 139.8 KB](https://www.miataturbo.net/attachments/diy-turbo-discussion-14/202529d1501246130-10-bucks-turbo-heat-shield-image004.jpg)
Last edited by triple88a; 11-25-2009 at 02:19 PM.
#6
Elite Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Chicago, IL
Posts: 10,470
Total Cats: 1,812
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have it tied to the last bolt at the valve cover until i get a longer piece of metal so i can tie it to another place.
There is about half an inch of room between the downpipe and the shield and there is about an inch of room between the turbo and the shield and about half an inch of room between the coolant fitting and the shield.
In the front its held by the bolt that holds the ps fluid bottle and the 2 other bolts that hold the stock air box, in the middle is tied to the bolts that hold the bracket that held my windows washer bottle and at the end its held to the block via that bracket on that last pic however i'll move it to the body tomorrow since i'll get some more of the metal shin i need.
What i like about this is that it doesnt need any special screws or anything new drilled, it uses all the old holes and stuff.
I'm also thinking of buying a rubber line and cutting it on one side and putting it on top so it doesnt have that sharp edge.
There is about half an inch of room between the downpipe and the shield and there is about an inch of room between the turbo and the shield and about half an inch of room between the coolant fitting and the shield.
In the front its held by the bolt that holds the ps fluid bottle and the 2 other bolts that hold the stock air box, in the middle is tied to the bolts that hold the bracket that held my windows washer bottle and at the end its held to the block via that bracket on that last pic however i'll move it to the body tomorrow since i'll get some more of the metal shin i need.
What i like about this is that it doesnt need any special screws or anything new drilled, it uses all the old holes and stuff.
I'm also thinking of buying a rubber line and cutting it on one side and putting it on top so it doesnt have that sharp edge.
#18
Elite Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Chicago, IL
Posts: 10,470
Total Cats: 1,812
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
which one? my heatshield i made above in the 1st post or the flux capacitor? In the mourning, on my way to work, the hood was very frozen. When i got there i checked it out. Around the turbo it was dry, over the engine block it was melted, on the other side of the wall i made by the air filter. It was still ice like it was before i even started the car. You could see where the heatshield is at. There was a fine line between the dry and the frozen part on the hood.