1.8L DIY Turbo Set-up with BorgWarner EFR-6258
#22
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Faeflora,
I'll try to snap some good pics of the exhaust. Most of the hardware was from Summit Racing. Part numbers of the specific components can be found in my parts list.
8. Exhaust – Custom w/ 2 Resonators
I'll try to snap some good pics of the exhaust. Most of the hardware was from Summit Racing. Part numbers of the specific components can be found in my parts list.
8. Exhaust – Custom w/ 2 Resonators
a. Custom 3.5 – 3.0” Downpipe
b. Resonator #1 (Summit p/n WLK-24238)
c. Resonator #2 (Summit p/n WLK-24219)
d. Flex Pipe (Summit p/n JEX-FLX3010B)
e. Exhaust Wrap 1” (Summit p/n DEI-010120)
f. O2 exhaust bungs (Summit p/n 35-4005)
g. Heatshield for Underside of Hood (Summit p/n DEI-010401)
h. Gasket, 3-bolt exhaust (Summit p/n SUM-610130)
i. Flange, 3-bolt exhaust (Summit p/n SUM-G4761)
b. Resonator #1 (Summit p/n WLK-24238)
c. Resonator #2 (Summit p/n WLK-24219)
d. Flex Pipe (Summit p/n JEX-FLX3010B)
e. Exhaust Wrap 1” (Summit p/n DEI-010120)
f. O2 exhaust bungs (Summit p/n 35-4005)
g. Heatshield for Underside of Hood (Summit p/n DEI-010401)
h. Gasket, 3-bolt exhaust (Summit p/n SUM-610130)
i. Flange, 3-bolt exhaust (Summit p/n SUM-G4761)
#34
Senior Member
iTrader: (1)
Join Date: Dec 2008
Location: Manassas, Virginia
Posts: 1,242
Total Cats: 57
You had me at "Borg Warner". Also, are you worried about your internals at all? I got my tuner to stop at 250whp cus I haven't touched my internals and the general consensus was that you shouldn't go above 250 on stock internals. I was wondering if its ok to go higher under certain conditions?
#37
You had me at "Borg Warner". Also, are you worried about your internals at all? I got my tuner to stop at 250whp cus I haven't touched my internals and the general consensus was that you shouldn't go above 250 on stock internals. I was wondering if its ok to go higher under certain conditions?
#40
Sweet EFR setup, I've really been thinking about doing a 94 miata build for some time now but I just bought a 08 mazdaspeed3 I'll have to put those plans on hold for now.
Your profile says western NC, I'm from the Asheville area myself if you wouldn't mind I'd like to check it out sometime.
Your profile says western NC, I'm from the Asheville area myself if you wouldn't mind I'd like to check it out sometime.