FS: 1995 Turbo Miata w/ CF Hardtop (many parts available too)
#1
FS: 1995 Turbo Miata w/ CF Hardtop (many parts available too)
Car is Sold
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Mods that can be had for additional fee: (most still brand new)
1. NEW Wolf Miata Alarm, Pwr Windows, Pwr Locks $500.00 (retail $750) [PICTURE]
2. NEW Defi Link Gauges and Controller (Boost, EGT, Oil Temp, Water Temp and Controller) 750.00 (retail $1000) [PICTURE]
3. NEW Alpine CDA-9847 Stereo, 2 8" Image Dynamics ID8 subs, 2 Rockford Fosgate (P200.2 and P325.2) Amplifiers, 2 6" door speakers $550.00 (retail about $750)[PICTURE 1] [PICTURE 2]
4a. NEW Tein Flex Coilovers w/ additional 8kg front rate springs Sold
4b. EDFC Controller including motors Sold
5. NEW in Box Carpet kit w/ mass backing (charcoal ultra plush cut pile from stockinteriors.com) 175.00 (retail $300)NO PICTURE SORRY]
6. NEW "Roadster" branded quality floor mats (black with blue lettering) $70.00 (retail $90)[PICTURE]
7. NEW DDM Stereo Surround (custom laser cut with cut-out for the Defi Link Controller) 80.00 (cost me 195.00)[PICTURE]
8. USED by me..949Racing Nickel 6UL lightweight Racing Wheels Sold
9. USED 3.909 Final Drive Ratio Sold
10. NEW Flying Miata Cam Gears 250.00 (Retail $300) [PICTURE] Pending Sale
11. Newly Powder Coated Valve Cover - Wrinkle Carbon Grey w/ Polish Letters (Cut to expose cam gears before coating) $125.00 (cost me 150.00 for the spare part and the coating) [PICTURE]
12. NEW Flying Miata Race Pipe (cat removal pipe) $125.00 (retail 175.00) [PICTURE 1] [PICTURE 2]
13. [TO YOUR SPECS] Coil On Plug setup. Sold
14. Autokonexian Fiberglass Vented Hood (unpainted, no gills) $275.00 (retail $380) [NO PICTURE, slight scratch but still unpainted so easy fix]
15a. NEW Gates Racing Timing Belt $65.00 (Retail $85.00) [PICTURE]Pending Sale
15b. NEW Gates Racing Water Pump and Alternator Belt $35.00 (Retail $50.00) [PICTURE]
15c. NEW Gates Racing Power steering without AC belt $35.00 (Retail $50.00) [PICTURE]
16. NEW Water Pump 94-95 $50.00 (Retail $70.00)[PICTURE]
17. NEW Coil Pack 94-95 #BPE8-18-10XA-9U $80.00 (Retail $110.00)[PICTURE]
18. NEW OEM NGK Blue Plug Wires Sold
19. NEW Oil Catch Can Kit Sold
20. NEW Magnaflow Catalytic Converter - as it was shipped to me.. no flanges??? $40.00 (Retail $60.00) [PICTURE]
21. NEW Beatrush PPF Rear Bar Sold
22. NEW Valve Cover Gasket (should probalby go with valve cover puchase but doesn't have to) $25.00 (Retail $40.00) [PICTURE]
23. NEW Spark Plugs Sold
23. Beginnings of a coolant Re-Route (includes JR Spacer, 1.6 thermostat cover, New OEM temp sensor (to mount into the spacer)) $45.00 (I paid about 70.00)
24. NEW Miata Workshop Manual for 1995 (still in plastic) $50.00 (Retail 100.00)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Mods that can be had for additional fee: (most still brand new)
1. NEW Wolf Miata Alarm, Pwr Windows, Pwr Locks $500.00 (retail $750) [PICTURE]
2. NEW Defi Link Gauges and Controller (Boost, EGT, Oil Temp, Water Temp and Controller) 750.00 (retail $1000) [PICTURE]
3. NEW Alpine CDA-9847 Stereo, 2 8" Image Dynamics ID8 subs, 2 Rockford Fosgate (P200.2 and P325.2) Amplifiers, 2 6" door speakers $550.00 (retail about $750)[PICTURE 1] [PICTURE 2]
4a. NEW Tein Flex Coilovers w/ additional 8kg front rate springs Sold
4b. EDFC Controller including motors Sold
5. NEW in Box Carpet kit w/ mass backing (charcoal ultra plush cut pile from stockinteriors.com) 175.00 (retail $300)NO PICTURE SORRY]
6. NEW "Roadster" branded quality floor mats (black with blue lettering) $70.00 (retail $90)[PICTURE]
7. NEW DDM Stereo Surround (custom laser cut with cut-out for the Defi Link Controller) 80.00 (cost me 195.00)[PICTURE]
8. USED by me..949Racing Nickel 6UL lightweight Racing Wheels Sold
9. USED 3.909 Final Drive Ratio Sold
10. NEW Flying Miata Cam Gears 250.00 (Retail $300) [PICTURE] Pending Sale
11. Newly Powder Coated Valve Cover - Wrinkle Carbon Grey w/ Polish Letters (Cut to expose cam gears before coating) $125.00 (cost me 150.00 for the spare part and the coating) [PICTURE]
12. NEW Flying Miata Race Pipe (cat removal pipe) $125.00 (retail 175.00) [PICTURE 1] [PICTURE 2]
13. [TO YOUR SPECS] Coil On Plug setup. Sold
14. Autokonexian Fiberglass Vented Hood (unpainted, no gills) $275.00 (retail $380) [NO PICTURE, slight scratch but still unpainted so easy fix]
15a. NEW Gates Racing Timing Belt $65.00 (Retail $85.00) [PICTURE]Pending Sale
15b. NEW Gates Racing Water Pump and Alternator Belt $35.00 (Retail $50.00) [PICTURE]
15c. NEW Gates Racing Power steering without AC belt $35.00 (Retail $50.00) [PICTURE]
16. NEW Water Pump 94-95 $50.00 (Retail $70.00)[PICTURE]
17. NEW Coil Pack 94-95 #BPE8-18-10XA-9U $80.00 (Retail $110.00)[PICTURE]
18. NEW OEM NGK Blue Plug Wires Sold
19. NEW Oil Catch Can Kit Sold
20. NEW Magnaflow Catalytic Converter - as it was shipped to me.. no flanges??? $40.00 (Retail $60.00) [PICTURE]
21. NEW Beatrush PPF Rear Bar Sold
22. NEW Valve Cover Gasket (should probalby go with valve cover puchase but doesn't have to) $25.00 (Retail $40.00) [PICTURE]
23. NEW Spark Plugs Sold
23. Beginnings of a coolant Re-Route (includes JR Spacer, 1.6 thermostat cover, New OEM temp sensor (to mount into the spacer)) $45.00 (I paid about 70.00)
24. NEW Miata Workshop Manual for 1995 (still in plastic) $50.00 (Retail 100.00)
Last edited by belacyrf; 12-15-2008 at 09:21 PM.
#9
Elite Member
iTrader: (22)
Joined: Dec 2006
Posts: 3,224
Total Cats: 3
From: Sunny Spanish speaking Non US Caribbean
I'm sorry to see you part this car. I once pmed you and told you that apart from the color, I thought you had one of the most beautiful NA Miatas I'd seen.
I wish I could buy the car and import it. Local regulations prevent me from doing it.
I'll repeat my offer for the low pros. I'm more than willing to buy those.
Good luck with the sale.
BTW, I just sent FM an email this morning asking for a price quote for the Racing Beat Type II rear bumper to complete my bodykit. Let me know if you're willing to part with it and I'll buy it from you instead.
I wish I could buy the car and import it. Local regulations prevent me from doing it.
I'll repeat my offer for the low pros. I'm more than willing to buy those.
Good luck with the sale.
BTW, I just sent FM an email this morning asking for a price quote for the Racing Beat Type II rear bumper to complete my bodykit. Let me know if you're willing to part with it and I'll buy it from you instead.
#10
Main post updated with pics of the parts...
Thanks a ton Rafa, I'm pretty sad to see it go.. but my HOA isn't allowing anyone to work on their cars anymore, and I dont have a garage. So I've got a ton of things to do, and no where to do it. Plus with the new kid, it's just not gonna work out.
I was totally bummed grabbing pics of all the parts in storage. If I were able to put all these parts on the car, it would have been a really nice ride (more so than it is now). The fuel system with the dual feed fuel rail, and the Magnafuel FPR looks pretty trick too. Oh well, we'll see how it goes.
I'm probably not going to part out the bumpers since I dont have any originals or I'd definately take you up on your offer.
Thanks again.
Thanks a ton Rafa, I'm pretty sad to see it go.. but my HOA isn't allowing anyone to work on their cars anymore, and I dont have a garage. So I've got a ton of things to do, and no where to do it. Plus with the new kid, it's just not gonna work out.
I was totally bummed grabbing pics of all the parts in storage. If I were able to put all these parts on the car, it would have been a really nice ride (more so than it is now). The fuel system with the dual feed fuel rail, and the Magnafuel FPR looks pretty trick too. Oh well, we'll see how it goes.
I'm probably not going to part out the bumpers since I dont have any originals or I'd definately take you up on your offer.
Thanks again.
#11
Elite Member
iTrader: (22)
Joined: Dec 2006
Posts: 3,224
Total Cats: 3
From: Sunny Spanish speaking Non US Caribbean
Main post updated with pics of the parts...
Thanks a ton Rafa, I'm pretty sad to see it go.. but my HOA isn't allowing anyone to work on their cars anymore, and I dont have a garage. So I've got a ton of things to do, and no where to do it. Plus with the new kid, it's just not gonna work out.
I was totally bummed grabbing pics of all the parts in storage. If I were able to put all these parts on the car, it would have been a really nice ride (more so than it is now). The fuel system with the dual feed fuel rail, and the Magnafuel FPR looks pretty trick too. Oh well, we'll see how it goes.
I'm probably not going to part out the bumpers since I dont have any originals or I'd definately take you up on your offer.
Thanks again.
Thanks a ton Rafa, I'm pretty sad to see it go.. but my HOA isn't allowing anyone to work on their cars anymore, and I dont have a garage. So I've got a ton of things to do, and no where to do it. Plus with the new kid, it's just not gonna work out.
I was totally bummed grabbing pics of all the parts in storage. If I were able to put all these parts on the car, it would have been a really nice ride (more so than it is now). The fuel system with the dual feed fuel rail, and the Magnafuel FPR looks pretty trick too. Oh well, we'll see how it goes.
I'm probably not going to part out the bumpers since I dont have any originals or I'd definately take you up on your offer.
Thanks again.
****; you don't know how much I hate not being able to buy that car from you!
FWIW, in my book you did a great job as a Miata owner.
Sorry man.
#19
I can talk to them to see if they'd want to do that... but if I sell the advans, it wont be cheap. Those suckers were expensive, not to mention the 4 month wait from Japan... eeesh
Not to mention I have these crazy, incredibly "bling", not incredibly functional lug-nuts holding them on haha
http://www.naroadster.com/forumlinks.../Advan1_sm.jpg
Not to mention I have these crazy, incredibly "bling", not incredibly functional lug-nuts holding them on haha
http://www.naroadster.com/forumlinks.../Advan1_sm.jpg