1999 Mazdaspeed 10th Anniversary for Sale.
#1
Thread Starter
Senior Member
iTrader: (11)
Joined: Sep 2007
Posts: 794
Total Cats: 11
From: Killen, AL, 35645
1999 Mazdaspeed 10th Anniversary for Sale.
Looks like this is the end of my fine jewel. Due to the condition of the economy, I can know longer to make ends meet without selling everything I got. Located in North Alabama, this is one special little 10th Anniversary. The only one that I know of; I have dubbed it a "Mazdaspeed". Only 50,000 miles. This car has over
There is nothing really bad about this little car except a rip in the top, the body is immaculate as well as the interior. Below is a list of what this car has got
Engine.
Hand-Polished Valve Cover, Synthetics oil used for the last 15,000 miles.
NGK spark plug wires. (40 dollars)
NGK BKR-7E11 sparkplugs installed. (15 dollars)
"Mazdaspeed" Turbo Kit equipped with the quick spooling IHI-RBH5 Turbo with less than 5,000 miles of use. Fuel and ignition management by Flyin' Miatas' voodoo card with 4 degrees ignition retard at 8 psi. Expect 170-180rwhp. Never overheates. (1,000 dollars after purchase and my installation)
Coolant System.
Bell Engineering complete coolant recirculation system. (Not the cheap ****) (250 dollars)
Transmission.
Aisin 6-speed transmission, apparently these are known to be much stronger transmissions than the standard 5 speed, good for 300-350 horsepower.
Differential, Torsen 3:90 Limited Slip Differential. This final drive ratio was discontinued in 03', can no longer be purchased new from dealership.
Suspension.
Fat Cat Motorsport's 36mm/46mm rear MCU bumpstops with MCU top shock mounts. (120 dollars)
Flyin Miata 99-05 Suspension Kit stage 2. (1,000 dollars shipped.)
Flyin Miata 2nd Generation Springs. (A tasteful non-scrubbing lowering)
Flyin Miata Tokico Shocks.
Flyin Miata Adjustable Sway Bars.
Wheels and Tires.
1999 10th AE Polished Alloys, Beautiful and near perfect!
1997 M-Edition Alloys for sale for 600 dollars with Falken RT-615 tires.
Exhaust.
Enthuza 2.5 dual exhaust with 2.25 inch outlets. (400 dollars)
Flyin Miata 2.5 inch midpipe with high flow cat and resonator. (400 dollars)
Interior.
Autometer 2/16 Boost Gauge and 2/16 Air/Fuel Ratio Gauge (narrowband) (80 dollars)
Bell Engineering Double Gauge Pillar Pod. (30 dollars)
Hard Dog M2 sport bar with double diagonals. (450 dollars shipped)
Panasonic CQ-583 double din DVD Player (400 dollars)
Clear Water Sound System. (250 dollars)
Pioneer 300 Watt Amplifier. (150 dollars)
Audio System replaced and immaculate Installed by Union IBEW Electrician.
01-05 Center Console. No broken cup holder lids. (163 dollars)
Exterior.
01-05 Headlight fixtures. (400 dollars)
01-05 Foglight fixtures. (60 dollars)
01-05 Front end bumper. (150 dollars)
04-05 MazdaSpeed Miata Front Lip Air Dam. (Goes for up to 400 dollars used)
99-05 Brilliant Black rear spoiler. (It looks great with the roll bar, trust me.) (60 dollars)
Almost 6,000 dollars and hundreds of hours of my time has been added in quality parts, maybe parts made in the U.S.A. And absolutely no parts is J.D.M. Type China... (Ebay ****)
There is nothing really bad about this little car except a rip in the top, the body is immaculate as well as the interior. Below is a list of what this car has got
Engine.
Hand-Polished Valve Cover, Synthetics oil used for the last 15,000 miles.
NGK spark plug wires. (40 dollars)
NGK BKR-7E11 sparkplugs installed. (15 dollars)
"Mazdaspeed" Turbo Kit equipped with the quick spooling IHI-RBH5 Turbo with less than 5,000 miles of use. Fuel and ignition management by Flyin' Miatas' voodoo card with 4 degrees ignition retard at 8 psi. Expect 170-180rwhp. Never overheates. (1,000 dollars after purchase and my installation)
Coolant System.
Bell Engineering complete coolant recirculation system. (Not the cheap ****) (250 dollars)
Transmission.
Aisin 6-speed transmission, apparently these are known to be much stronger transmissions than the standard 5 speed, good for 300-350 horsepower.
Differential, Torsen 3:90 Limited Slip Differential. This final drive ratio was discontinued in 03', can no longer be purchased new from dealership.
Suspension.
Fat Cat Motorsport's 36mm/46mm rear MCU bumpstops with MCU top shock mounts. (120 dollars)
Flyin Miata 99-05 Suspension Kit stage 2. (1,000 dollars shipped.)
Flyin Miata 2nd Generation Springs. (A tasteful non-scrubbing lowering)
Flyin Miata Tokico Shocks.
Flyin Miata Adjustable Sway Bars.
Wheels and Tires.
1999 10th AE Polished Alloys, Beautiful and near perfect!
1997 M-Edition Alloys for sale for 600 dollars with Falken RT-615 tires.
Exhaust.
Enthuza 2.5 dual exhaust with 2.25 inch outlets. (400 dollars)
Flyin Miata 2.5 inch midpipe with high flow cat and resonator. (400 dollars)
Interior.
Autometer 2/16 Boost Gauge and 2/16 Air/Fuel Ratio Gauge (narrowband) (80 dollars)
Bell Engineering Double Gauge Pillar Pod. (30 dollars)
Hard Dog M2 sport bar with double diagonals. (450 dollars shipped)
Panasonic CQ-583 double din DVD Player (400 dollars)
Clear Water Sound System. (250 dollars)
Pioneer 300 Watt Amplifier. (150 dollars)
Audio System replaced and immaculate Installed by Union IBEW Electrician.
01-05 Center Console. No broken cup holder lids. (163 dollars)
Exterior.
01-05 Headlight fixtures. (400 dollars)
01-05 Foglight fixtures. (60 dollars)
01-05 Front end bumper. (150 dollars)
04-05 MazdaSpeed Miata Front Lip Air Dam. (Goes for up to 400 dollars used)
99-05 Brilliant Black rear spoiler. (It looks great with the roll bar, trust me.) (60 dollars)
Almost 6,000 dollars and hundreds of hours of my time has been added in quality parts, maybe parts made in the U.S.A. And absolutely no parts is J.D.M. Type China... (Ebay ****)
Last edited by Cody Strife; 07-22-2009 at 10:03 PM.
#2
Thread Starter
Senior Member
iTrader: (11)
Joined: Sep 2007
Posts: 794
Total Cats: 11
From: Killen, AL, 35645
Low ball offers and insults are to be anticipated as usual. If unreasonable, I will part out all aftermarket parts, returning the car to stock 99 10AE, and price for 9,000. The 99 10AE polished Alloys are included, but 97 immaculate condition M-Edition wheels are for sale as well.
#3
Thread Starter
Senior Member
iTrader: (11)
Joined: Sep 2007
Posts: 794
Total Cats: 11
From: Killen, AL, 35645
Ah... Now for the price of the car. Given Kelly Blue Books resale value of close to 9,000 dollars private party in excellent condition with these miles and in this condition, minus that damn softop. The car in stock condition would reasonably sale for 8,500.
I have 6,000 dollars in quality aftermarket parts that have depreciated 20-30 percent of their value. So that's roughly 1,200 to 2,000 dollars.
So I would like to sale this car as it sits for 13,500 dollars; low ball offers will guarantee a part out of all after market equipment.
I have 6,000 dollars in quality aftermarket parts that have depreciated 20-30 percent of their value. So that's roughly 1,200 to 2,000 dollars.
So I would like to sale this car as it sits for 13,500 dollars; low ball offers will guarantee a part out of all after market equipment.
#6
A say part it. I need a 1.8l turbo manifold for my swap, I would be interested in the coolant reroute, the duel pod gauge cluster, and possibly the six speed as well if you are not taking back to stock to sell. Plus, I can just pick up the manifold and not have to pay for shipping since I live so close.
Thread
Thread Starter
Forum
Replies
Last Post
russian
Miata parts for sale/trade
6
10-08-2015 04:01 PM