1991 Mazda Miata - $10000
#1
Thread Starter
Junior Member
iTrader: (1)
Joined: May 2010
Posts: 131
Total Cats: 0
From: Apra Harbor, Guam
1991 Mazda Miata - $10000
Category: Import
Status: Clean Title
I have a 1991 Mazda Miata for sale, in USA - Connecticut.
Engine Size: 1.7L
Asking price is 9000
Seller Information: Joe Eschert
Phone: (757) 818-0690
Email: remus113@hotmail.com
Im sad about having to do this but I must sell my miata. Today in class we got our ports that we will be going to and I got Guam, so i can not take my miata with me. Many of you know about this car if you are in the CT and know what i bought this car for, and know that i got it for a steal. Im not looking for an outrageous price for it, just make me a reasonable offer for what you think this car is worth. I have a loan that i need to pay off. The only thing im going to say is that right now it having some issues starting and running. Ive narrowed it down to the coil pack. Ive replaced the battery and the spark plugs, the plug wires are pretty much brand new and its getting air and a lot of fuel (it runs a little rich). Id fix this myself but im broke right now. I also have to replace the back drive side rotor, which i will be doing this weekend. FastColt said the engine had about 1k on is since the rebuild and ive put maybe 4k on it because i really only get to go off base on the weekends. Now down to the nitty gritty.
Engine Internal
-1.6 B6 long nose
-rotating assembley balanced
-Crank reground
-Wiseco .060 over pistons
-Eagle H beam rods
-ALC Race bearings
-ARP Head, Rod, and Main bolts/studs
-Boundary Engineering oil pump gears
-OEM new Water Pump
-OEM new balancer
-Full New gasket set
-OEM new valve seals, valves freshend up
-Super Tech Dual valve springs
-Super Tech Titainium retainers
-FelPro multi layer steel head gasket
-Corksport Cam adjustable cam gears
-Gates Racing timing belt.
Drive Train
-XTD Prolite 9lb flywheel
-ACT XT Pressure Plate
-ACT 4 puck sprung hub
-Torsen LSD, 97 axles and drive shft
Turbo + Misc Stuff
-Garrett T3 60-1 .48 hotside w/ 4" K&N filter
-ETD tubular shorty manifold
-3" Custom turbo back exhaust
-Tial 38mm wastegate
-Tial 50mm Blow off valve
-CXRacing intercooler 24"x10"x3"
-2.5" i/c piping w/ all tbolt clamps
-Godspeed Racing aluminum radiator w/ 2 12" slim fans
Fuel / Electronics
-MSPNP w/ 4 bar map sensor
-AEM Wide band + gauge
-Auto meter 30/30 boost gauge
-Walbro 255 fuel pump
-RC 750cc injectors
-Magnacore 10mm spark wires
Suspension
-Ebay adjustable coil overs
Wheels and Tires
-16" Drag DR13 BF G-Force KDW 225 drag radials in the rear, Kumo Escata's in the front
Status: Clean Title
I have a 1991 Mazda Miata for sale, in USA - Connecticut.
Engine Size: 1.7L
Asking price is 9000
Seller Information: Joe Eschert
Phone: (757) 818-0690
Email: remus113@hotmail.com
Im sad about having to do this but I must sell my miata. Today in class we got our ports that we will be going to and I got Guam, so i can not take my miata with me. Many of you know about this car if you are in the CT and know what i bought this car for, and know that i got it for a steal. Im not looking for an outrageous price for it, just make me a reasonable offer for what you think this car is worth. I have a loan that i need to pay off. The only thing im going to say is that right now it having some issues starting and running. Ive narrowed it down to the coil pack. Ive replaced the battery and the spark plugs, the plug wires are pretty much brand new and its getting air and a lot of fuel (it runs a little rich). Id fix this myself but im broke right now. I also have to replace the back drive side rotor, which i will be doing this weekend. FastColt said the engine had about 1k on is since the rebuild and ive put maybe 4k on it because i really only get to go off base on the weekends. Now down to the nitty gritty.
Engine Internal
-1.6 B6 long nose
-rotating assembley balanced
-Crank reground
-Wiseco .060 over pistons
-Eagle H beam rods
-ALC Race bearings
-ARP Head, Rod, and Main bolts/studs
-Boundary Engineering oil pump gears
-OEM new Water Pump
-OEM new balancer
-Full New gasket set
-OEM new valve seals, valves freshend up
-Super Tech Dual valve springs
-Super Tech Titainium retainers
-FelPro multi layer steel head gasket
-Corksport Cam adjustable cam gears
-Gates Racing timing belt.
Drive Train
-XTD Prolite 9lb flywheel
-ACT XT Pressure Plate
-ACT 4 puck sprung hub
-Torsen LSD, 97 axles and drive shft
Turbo + Misc Stuff
-Garrett T3 60-1 .48 hotside w/ 4" K&N filter
-ETD tubular shorty manifold
-3" Custom turbo back exhaust
-Tial 38mm wastegate
-Tial 50mm Blow off valve
-CXRacing intercooler 24"x10"x3"
-2.5" i/c piping w/ all tbolt clamps
-Godspeed Racing aluminum radiator w/ 2 12" slim fans
Fuel / Electronics
-MSPNP w/ 4 bar map sensor
-AEM Wide band + gauge
-Auto meter 30/30 boost gauge
-Walbro 255 fuel pump
-RC 750cc injectors
-Magnacore 10mm spark wires
Suspension
-Ebay adjustable coil overs
Wheels and Tires
-16" Drag DR13 BF G-Force KDW 225 drag radials in the rear, Kumo Escata's in the front
Last edited by SneakyB757; 11-22-2010 at 11:59 AM.
#3
Thread Starter
Junior Member
iTrader: (1)
Joined: May 2010
Posts: 131
Total Cats: 0
From: Apra Harbor, Guam
yeah im quite pissed i cant take it, well i could but i dont have the money to do so. it just makes me sad panda, but i will by another miata someday. perhaps when i get a shore duty station. then i will build it my way. Not to say Chris's way is wrong, but i think i might try something diabolical, like a 2.2L kenne bell SC cobra mustang engine. You know just go ***** to the wall with it.
also i just noticed that my 100th post on this site was me putting up the ad to sell my miata, now im even more sad panda.
also i just noticed that my 100th post on this site was me putting up the ad to sell my miata, now im even more sad panda.
#8
Thread Starter
Junior Member
iTrader: (1)
Joined: May 2010
Posts: 131
Total Cats: 0
From: Apra Harbor, Guam
im not set on the 10k. its an obo in every sense of the term. i just want enough to pay off the loan i have. i only said 10k because it wouldn't let me post it with a negotiable price tag.
#15
Thread Starter
Junior Member
iTrader: (1)
Joined: May 2010
Posts: 131
Total Cats: 0
From: Apra Harbor, Guam
Thanks. Im taking a hit on this car at that price, as in ill still be paying for part of the loan on a car i dont have. I need this car gone, the fiancee agree that we could buy a new sti so the miata need to leave fast.
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 09:17 PM