Yet another GTX build thread.
#1
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ya ya, I bought one too. Mine needs quite a bit of work though. Its relatively rust free. Nothing major. The transmission in it is bad but it came with a good one. Right now i'm just stripping the engine bay down to get at that transmission.
Today I pretty much just removed the skid pan, some of the turbo heat shields, the radiator, the intercooler and associated plumbing, some shitty wiring from the previous owner, the grill and the AC system.
Having all of this out of the way makes it look like the tranny R&R is going to be pretty straight-forward. I'm more used to doing transmissions in RWD cars so this looks like it is going to be awkward getting it to stab onto the engine.
Anyway, pics!
How the engine bay looked before I got into it.
![Name: DSC02665.jpg
Views: 240
Size: 159.1 KB](https://www.miataturbo.net/attachments/build-threads-57/193807d1501229438-yet-another-gtx-build-thread-dsc02665.jpg)
The engine bay as it sits right now.
![Name: DSC02676.jpg
Views: 235
Size: 169.7 KB](https://www.miataturbo.net/attachments/build-threads-57/193808d1501229438-yet-another-gtx-build-thread-dsc02676.jpg)
![Name: DSC02674.jpg
Views: 225
Size: 135.8 KB](https://www.miataturbo.net/attachments/build-threads-57/193809d1501229438-yet-another-gtx-build-thread-dsc02674.jpg)
The rusty master cylinder and brake booster. Yuk.
![Name: DSC02683.jpg
Views: 216
Size: 138.9 KB](https://www.miataturbo.net/attachments/build-threads-57/193810d1501229438-yet-another-gtx-build-thread-dsc02683.jpg)
This turbo is teeny tiny!
![Name: DSC02678.jpg
Views: 235
Size: 110.8 KB](https://www.miataturbo.net/attachments/build-threads-57/193811d1501229438-yet-another-gtx-build-thread-dsc02678.jpg)
Some of the wiring I removed.
![Name: DSC02677.jpg
Views: 214
Size: 107.8 KB](https://www.miataturbo.net/attachments/build-threads-57/193812d1501229438-yet-another-gtx-build-thread-dsc02677.jpg)
Cracked turbo manifold. Pretty sure i'm just going to have to make a new one using Sched 10 stainless. I have all the pieces lying around except the turbo flange. The way these are cast leaves no room for thermal expansion and contraction. Doubt i'd bother replacing a broken manifold with another one that is just going to break eventually too.
![Name: DSC02680.jpg
Views: 203
Size: 115.9 KB](https://www.miataturbo.net/attachments/build-threads-57/193813d1501229438-yet-another-gtx-build-thread-dsc02680.jpg)
![Name: DSC02681.jpg
Views: 215
Size: 101.5 KB](https://www.miataturbo.net/attachments/build-threads-57/193814d1501229438-yet-another-gtx-build-thread-dsc02681.jpg)
What is this "bucket" area behind the headlight on the Left side? Could be a good spot to hide tools or something =P
![Name: DSC02682.jpg
Views: 220
Size: 113.5 KB](https://www.miataturbo.net/attachments/build-threads-57/193815d1501229438-yet-another-gtx-build-thread-dsc02682.jpg)
Anyway, thats just the beginning. It will get more interesting as I redo the turbo stuff and build a new exhaust etc. Eventually I believe I will be retrofitting either RX7 calipers (I have a set in the garage) or Escort GT calipers on VR4 rotors.
Edit: guess I should post some pics of the exterior as well.
![Name: DSC02660.jpg
Views: 232
Size: 153.1 KB](https://www.miataturbo.net/attachments/build-threads-57/193816d1501229438-yet-another-gtx-build-thread-dsc02660.jpg)
![Name: DSC02663.jpg
Views: 212
Size: 148.7 KB](https://www.miataturbo.net/attachments/build-threads-57/193817d1501229438-yet-another-gtx-build-thread-dsc02663.jpg)
Today I pretty much just removed the skid pan, some of the turbo heat shields, the radiator, the intercooler and associated plumbing, some shitty wiring from the previous owner, the grill and the AC system.
Having all of this out of the way makes it look like the tranny R&R is going to be pretty straight-forward. I'm more used to doing transmissions in RWD cars so this looks like it is going to be awkward getting it to stab onto the engine.
Anyway, pics!
How the engine bay looked before I got into it.
![Name: DSC02665.jpg
Views: 240
Size: 159.1 KB](https://www.miataturbo.net/attachments/build-threads-57/193807d1501229438-yet-another-gtx-build-thread-dsc02665.jpg)
The engine bay as it sits right now.
![Name: DSC02676.jpg
Views: 235
Size: 169.7 KB](https://www.miataturbo.net/attachments/build-threads-57/193808d1501229438-yet-another-gtx-build-thread-dsc02676.jpg)
![Name: DSC02674.jpg
Views: 225
Size: 135.8 KB](https://www.miataturbo.net/attachments/build-threads-57/193809d1501229438-yet-another-gtx-build-thread-dsc02674.jpg)
The rusty master cylinder and brake booster. Yuk.
![Name: DSC02683.jpg
Views: 216
Size: 138.9 KB](https://www.miataturbo.net/attachments/build-threads-57/193810d1501229438-yet-another-gtx-build-thread-dsc02683.jpg)
This turbo is teeny tiny!
![Name: DSC02678.jpg
Views: 235
Size: 110.8 KB](https://www.miataturbo.net/attachments/build-threads-57/193811d1501229438-yet-another-gtx-build-thread-dsc02678.jpg)
Some of the wiring I removed.
![Name: DSC02677.jpg
Views: 214
Size: 107.8 KB](https://www.miataturbo.net/attachments/build-threads-57/193812d1501229438-yet-another-gtx-build-thread-dsc02677.jpg)
Cracked turbo manifold. Pretty sure i'm just going to have to make a new one using Sched 10 stainless. I have all the pieces lying around except the turbo flange. The way these are cast leaves no room for thermal expansion and contraction. Doubt i'd bother replacing a broken manifold with another one that is just going to break eventually too.
![Name: DSC02680.jpg
Views: 203
Size: 115.9 KB](https://www.miataturbo.net/attachments/build-threads-57/193813d1501229438-yet-another-gtx-build-thread-dsc02680.jpg)
![Name: DSC02681.jpg
Views: 215
Size: 101.5 KB](https://www.miataturbo.net/attachments/build-threads-57/193814d1501229438-yet-another-gtx-build-thread-dsc02681.jpg)
What is this "bucket" area behind the headlight on the Left side? Could be a good spot to hide tools or something =P
![Name: DSC02682.jpg
Views: 220
Size: 113.5 KB](https://www.miataturbo.net/attachments/build-threads-57/193815d1501229438-yet-another-gtx-build-thread-dsc02682.jpg)
Anyway, thats just the beginning. It will get more interesting as I redo the turbo stuff and build a new exhaust etc. Eventually I believe I will be retrofitting either RX7 calipers (I have a set in the garage) or Escort GT calipers on VR4 rotors.
Edit: guess I should post some pics of the exterior as well.
![Name: DSC02660.jpg
Views: 232
Size: 153.1 KB](https://www.miataturbo.net/attachments/build-threads-57/193816d1501229438-yet-another-gtx-build-thread-dsc02660.jpg)
![Name: DSC02663.jpg
Views: 212
Size: 148.7 KB](https://www.miataturbo.net/attachments/build-threads-57/193817d1501229438-yet-another-gtx-build-thread-dsc02663.jpg)
![Name: DSC02661.jpg
Views: 220
Size: 134.0 KB](https://www.miataturbo.net/attachments/build-threads-57/193818d1501229438-yet-another-gtx-build-thread-dsc02661.jpg)
#5
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The stock GTX. Bob told me he's converted a GTX to use AWD protege hugs/spindles which eliminates these horrible wheel bearings we're stuck with. Unfortunately the AWD protege is just as rare as these :(
Check out the VR4 rotor vs stock.
![](http://www.werbatfik.com/uplimg/HPIM0091.jpg)
Also, here are some variations of the RX7 caliper. I'd come up with a much better mounting solution than either of these, but it looks like a pretty good fit.
![](http://www.clubprotege.com/forum/attachment.php?attachmentid=35785&stc=1&d=1235267661)
![](http://www.clubprotege.com/forum/attachment.php?attachmentid=35786&stc=1&d=1235267980)
![](http://www.clubprotege.com/forum/attachment.php?attachmentid=35784&stc=1&d=1235267523)
This is the RX7s in the rear.
![](http://www.clubprotege.com/forum/attachment.php?attachmentid=35783&stc=1&d=1235267523)
All from this thread:
http://www.clubprotege.com/forum/sho...t=40913&page=1
Check out the VR4 rotor vs stock.
![](http://www.werbatfik.com/uplimg/HPIM0091.jpg)
Also, here are some variations of the RX7 caliper. I'd come up with a much better mounting solution than either of these, but it looks like a pretty good fit.
This is the RX7s in the rear.
All from this thread:
http://www.clubprotege.com/forum/sho...t=40913&page=1
#7
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
haha, I figured you'd get a kick out of that nasty engine bay. I really want to pull everything and clean/re paint it but I really just want to get this thing on the road for the winter. I'm so close to just buying a miata long block and swapping it in so I can just pull everything out and go over it with a fine tooth comb. I dont have the time though and I want to finally get into snowboarding this winter so I'll need this car for trips up the mountain in the snow.
Yes, a bead blast cabinet would be heaven.
#9
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
They are not a project for the timid, thats for sure. I've still never driven one. I'm really hoping the work pays off in the end. I'm pretty sure it will but you never know =P I could end up selling it for something else AWD like a legacy. I've jizzed over these for about 10 years now so i'm pretty sure i'll love it
![](https://www.miataturbo.net/images/smilies/smile.gif)
#10
Cpt. Slow
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Are you pulling the engine to do the transmission? If so, beg/borrow/plead/steal a pressure washer. Spray the bay down with pure simple green, wait 15 minutes, and pressure wash. Repeat. Use compressed air on the rust junk, maybe a blow dryer, to keep it from rusting more.
Then buy stock in Armor All.
Then buy stock in Armor All.
#11
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
when you drive it for the first time dont compare it to a turbo miata! lol
i dont need to be thinkin bout getting another project yet. my hands are to full already, but when my car is close to where i want it im gonna need to pick somthing up to keep me from wanting to change stuff on the miata.
i dont need to be thinkin bout getting another project yet. my hands are to full already, but when my car is close to where i want it im gonna need to pick somthing up to keep me from wanting to change stuff on the miata.
#14
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm on the hunt for one right now. If nothing else I'll just swap the long nose crank and new pistons into the GTX engine.
This is a common problem with these cars. They like to burn up cylinder #3 for some reason. The GTX engine in my miata had a bad #3, bbundy's cars have ruined #3 cyls as well. He suspects its something to do with the intake manifold feeding air better to #3 than the rest.
This is a common problem with these cars. They like to burn up cylinder #3 for some reason. The GTX engine in my miata had a bad #3, bbundy's cars have ruined #3 cyls as well. He suspects its something to do with the intake manifold feeding air better to #3 than the rest.
#16
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Also the interior is actually in great shape.
#17
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Phew, motor is finally out. Really wasn't any more difficult than a miata engine pull, perhaps even easier. Having more space in my garage would have made this much easier. The whole drivetrain could easily slip out under the left side frame rail.
Illustrating the tiny space i'm working with. My bench was only 2 feet behind that hoist. Just barely enough space to maneuver it.
![Name: DSC02694.jpg
Views: 204
Size: 150.4 KB](https://www.miataturbo.net/attachments/build-threads-57/193613d1501229094-yet-another-gtx-build-thread-dsc02694.jpg)
Engine on the ground in the engine bay while I decided how I was going to get it out.
![Name: DSC02695.jpg
Views: 222
Size: 168.2 KB](https://www.miataturbo.net/attachments/build-threads-57/193614d1501229094-yet-another-gtx-build-thread-dsc02695.jpg)
You can kind of see how it would have slipped under the frame rail easily if I had the space and a skateboard.
![Name: DSC02696.jpg
Views: 196
Size: 142.4 KB](https://www.miataturbo.net/attachments/build-threads-57/193615d1501229094-yet-another-gtx-build-thread-dsc02696.jpg)
Decided it just needed to come out the top.
![Name: DSC02697.jpg
Views: 230
Size: 120.9 KB](https://www.miataturbo.net/attachments/build-threads-57/193616d1501229094-yet-another-gtx-build-thread-dsc02697.jpg)
Tiny little turbo and cracked manifold.
![Name: DSC02698.jpg
Views: 239
Size: 149.6 KB](https://www.miataturbo.net/attachments/build-threads-57/193617d1501229094-yet-another-gtx-build-thread-dsc02698.jpg)
I really want to put this oil feed hardline on my miata. I'm going to either make one or find one from a B6T.
![Name: DSC02700.jpg
Views: 430
Size: 137.3 KB](https://www.miataturbo.net/attachments/build-threads-57/193618d1501229094-yet-another-gtx-build-thread-dsc02700.jpg)
And the engine/trans on the floor. It took a million turns of the hoist to get the motor turned 90 degrees from the way it was sitting in the engine bay.
![Name: DSC02701.jpg
Views: 209
Size: 153.0 KB](https://www.miataturbo.net/attachments/build-threads-57/193619d1501229094-yet-another-gtx-build-thread-dsc02701.jpg)
Lots of cleanup to do. Need to get my hands on a pressure washer.
![Name: DSC02703.jpg
Views: 211
Size: 136.1 KB](https://www.miataturbo.net/attachments/build-threads-57/193620d1501229094-yet-another-gtx-build-thread-dsc02703.jpg)
Overall it wasn't a bad job. Again, its really weird working on the same motor thats in my miata in this configuration. The starter and alternator are remarkably difficult to get to when the motor is in the car.
Illustrating the tiny space i'm working with. My bench was only 2 feet behind that hoist. Just barely enough space to maneuver it.
![Name: DSC02694.jpg
Views: 204
Size: 150.4 KB](https://www.miataturbo.net/attachments/build-threads-57/193613d1501229094-yet-another-gtx-build-thread-dsc02694.jpg)
Engine on the ground in the engine bay while I decided how I was going to get it out.
![Name: DSC02695.jpg
Views: 222
Size: 168.2 KB](https://www.miataturbo.net/attachments/build-threads-57/193614d1501229094-yet-another-gtx-build-thread-dsc02695.jpg)
You can kind of see how it would have slipped under the frame rail easily if I had the space and a skateboard.
![Name: DSC02696.jpg
Views: 196
Size: 142.4 KB](https://www.miataturbo.net/attachments/build-threads-57/193615d1501229094-yet-another-gtx-build-thread-dsc02696.jpg)
Decided it just needed to come out the top.
![Name: DSC02697.jpg
Views: 230
Size: 120.9 KB](https://www.miataturbo.net/attachments/build-threads-57/193616d1501229094-yet-another-gtx-build-thread-dsc02697.jpg)
Tiny little turbo and cracked manifold.
![Name: DSC02698.jpg
Views: 239
Size: 149.6 KB](https://www.miataturbo.net/attachments/build-threads-57/193617d1501229094-yet-another-gtx-build-thread-dsc02698.jpg)
I really want to put this oil feed hardline on my miata. I'm going to either make one or find one from a B6T.
![Name: DSC02700.jpg
Views: 430
Size: 137.3 KB](https://www.miataturbo.net/attachments/build-threads-57/193618d1501229094-yet-another-gtx-build-thread-dsc02700.jpg)
And the engine/trans on the floor. It took a million turns of the hoist to get the motor turned 90 degrees from the way it was sitting in the engine bay.
![Name: DSC02701.jpg
Views: 209
Size: 153.0 KB](https://www.miataturbo.net/attachments/build-threads-57/193619d1501229094-yet-another-gtx-build-thread-dsc02701.jpg)
Lots of cleanup to do. Need to get my hands on a pressure washer.
![Name: DSC02703.jpg
Views: 211
Size: 136.1 KB](https://www.miataturbo.net/attachments/build-threads-57/193620d1501229094-yet-another-gtx-build-thread-dsc02703.jpg)
Overall it wasn't a bad job. Again, its really weird working on the same motor thats in my miata in this configuration. The starter and alternator are remarkably difficult to get to when the motor is in the car.
#20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I think you need this, comes with extra tranny too.
http://cgi.ebay.com/ebaymotors/JDM-M...#ht_3728wt_939
and then you can sell me your upper 1.6 cam gear cover, rods, and cams.
http://cgi.ebay.com/ebaymotors/JDM-M...#ht_3728wt_939
and then you can sell me your upper 1.6 cam gear cover, rods, and cams.
![](https://www.miataturbo.net/images/smilies/smile.gif)
Last edited by JEMERY; 10-14-2010 at 01:38 PM.