Slowest turbo Miata ever
#821
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
This is why i can't have nice things.
Clutch on. Trans in. Starter & slave connected. Pumpkin bolted in. Driveshaft on. All fluids changed.
Few more things to finish up and i can get started on this boat.
Clutch on. Trans in. Starter & slave connected. Pumpkin bolted in. Driveshaft on. All fluids changed.
Few more things to finish up and i can get started on this boat.
#822
Read through the entire thread over the last couple hours, had a good time. That exhaust note is wonderful. I don't spring for ready-made exhausts because money, but that sound is magic.
Wastegate reference is still attached to the compressor outlet; How come?
Also had a chuckle at the flywheel removal solution. I'm glad to know this trick with a wrench. Google pic because I never took a picture while I was doing it.
Love your build thread.
Wastegate reference is still attached to the compressor outlet; How come?
Also had a chuckle at the flywheel removal solution. I'm glad to know this trick with a wrench. Google pic because I never took a picture while I was doing it.
Love your build thread.
#823
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
Hey, thanks man. Glad you enjoyed the build.
Few things are still done poorly, this is due to lazyness and i tend not to fix things if they aren't broken.
Few things are still done poorly, this is due to lazyness and i tend not to fix things if they aren't broken.
#825
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
I seem to have lost the little white clip on my WBO2 sensor. UEGO controller, Bosch sensor. I vaguely remember it falling off, i was pretty hammered and in GO mode getting things tore down. But i can't remember where i put it, or it went. Has anyone ever had this issue? Where do you find a replacement? Does anyone know what i'm talking about? I was drunk when i lost it, i was drunk when i was trying to find it, and i'm drunk currently... 4 years ago this was acceptable, now i feel like i can hardly function.
So... I upload a panorama of my absolutely wreckd garage. Just to see how the site handles such a wide image.
The real reason i can't get any work done:
ANNNNNNDDD banned for portrait mode.
So... I upload a panorama of my absolutely wreckd garage. Just to see how the site handles such a wide image.
The real reason i can't get any work done:
#826
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
So i haven't really done much with the Miata since i got the race boat.
I did manage to make one upgrade. It only took me roughly 7 years to do it... This was seriously a pain in the ***. I never want to install another roll bar again.
Boss Frog double diagonal.
Other than that, this thing is pretty much buttoned up and good to go.
I did manage to make one upgrade. It only took me roughly 7 years to do it... This was seriously a pain in the ***. I never want to install another roll bar again.
Boss Frog double diagonal.
Other than that, this thing is pretty much buttoned up and good to go.
#827
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
Want to know what it sounds like to get ripped off by ******** on the internet?
Watch the video with sound.
This is the kind of crap i don't have time for.
Anyone want to buy a Miata?
Watch the video with sound.
This is the kind of crap i don't have time for.
Anyone want to buy a Miata?
#829
Ouch. :(
I know them feels, but luckily the internet pointed out that the last set of 3.9 gears i got were soooo hammered that it was easy to tell they were nothing more than scrap metal before i tried to install.
Still sucks. Not as bad as what you've got going on.
Want to find another one and make a weekend visit down here? We can knock that job out in a couple hours and drink some good beer.
I know them feels, but luckily the internet pointed out that the last set of 3.9 gears i got were soooo hammered that it was easy to tell they were nothing more than scrap metal before i tried to install.
Still sucks. Not as bad as what you've got going on.
Want to find another one and make a weekend visit down here? We can knock that job out in a couple hours and drink some good beer.
#832
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
From what i understand it was a gear set purchased from corksport or miataroadster and rebuilt with that. It was unused after the rebuilt, from what i recall being told.
This is a bummer because i've got this engine running GOOD.
This is a bummer because i've got this engine running GOOD.
#835
Are you interested in trying to fix it, or just want to buy a diff that works? I have a MSM diff for sale, but it's 4.10 not 3.63 so prob not what you're looking for. But it is stronger than the one you previously busted. I can try to walk you through what to check on your current diff if you wanna try to diagnose and fix what is causing the noise. I just built a new diff for my miata about a week ago.
#836
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
Are you interested in trying to fix it, or just want to buy a diff that works? I have a MSM diff for sale, but it's 4.10 not 3.63 so prob not what you're looking for. But it is stronger than the one you previously busted. I can try to walk you through what to check on your current diff if you wanna try to diagnose and fix what is causing the noise. I just built a new diff for my miata about a week ago.
This one is coming out, probably starting today, it shouldn't be that big of a job. Everything is fresh and has never-seize on it. I have never messed with a diff, so i'm unsure if it's something i want to attack myself or not. I may crack it open just to see if i can find anything.
#837
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
I think i remember you offering that diff to me before. Unfortunately, i got a taste of 6 speed and 3.636, so i want to try and keep it. MSM diff needs new axles too right?
This one is coming out, probably starting today, it shouldn't be that big of a job. Everything is fresh and has never-seize on it. I have never messed with a diff, so i'm unsure if it's something i want to attack myself or not. I may crack it open just to see if i can find anything.
This one is coming out, probably starting today, it shouldn't be that big of a job. Everything is fresh and has never-seize on it. I have never messed with a diff, so i'm unsure if it's something i want to attack myself or not. I may crack it open just to see if i can find anything.
Doesn't the MSM diff have more options for ratios too?
#838
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
Got the diff out.
is there an easier way to get it past the axles?
There seems like a little "slop" but I have no idea. I really have no idea how to get this thing taken apart. Im probably just going to research some shops in the area and drop it off.
is there an easier way to get it past the axles?
There seems like a little "slop" but I have no idea. I really have no idea how to get this thing taken apart. Im probably just going to research some shops in the area and drop it off.
#840
Elite Member
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
Bought it off a member of this site.
Made a phone call. Gonna drop it off at a shop tomorrow and get a professional opinion. I'm not going to touch it, we'll see what they say.
Made a phone call. Gonna drop it off at a shop tomorrow and get a professional opinion. I'm not going to touch it, we'll see what they say.