Shuiend blows motor #5; Naturally Aspirated Glory Incoming
#1008
mkturbo.com
Thread Starter
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
It came on the car. The bolt on the back of the seat belt tower just spins forever. I have not wanted to spend the few hours taking it all apart to remove the bar. Anything more then 30min of effort generally does not get done on the DD.
326k 92.
326k 92.
#1016
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
orange is pretty much natural silicone color.
fire sleeve on braided stainless lines is kind of weird though. Just get some autozone hose, slit it, and zip tie it on the lines where they get close to stuff.
fire sleeve on braided stainless lines is kind of weird though. Just get some autozone hose, slit it, and zip tie it on the lines where they get close to stuff.
#1020
mkturbo.com
Thread Starter
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
Got the Aerocatch locking hood-pins installed. I still need to play with hood alignment and height of the pins some, but it just starting pouring out so that probably wont be done till Monday. Took me about 4 hours to install the hood-pins. A lot of it was slightly enlarging the hole and test fitting the locking latch. If you are installing these you will want a metric shitton of dremel blades. I used a cheap 4 speed HF dremel and it had no trouble with the job.
Hopefully tomorrow the storms let off for a bit so I can get my front water neck removed and get timing belt and other things back together.
Hopefully tomorrow the storms let off for a bit so I can get my front water neck removed and get timing belt and other things back together.